Insert number of mouse

Similar Questions

• Insert number of 'decimal number '.

  Hi all

  I created a table 'create... '. (f1 number (5.2));

  I want to insert the "12.34" number in this table.

  I can insert:

  insert into values zahl (12.45);

  insert into number values ('12.45');

  I know NLS and NLS_NUMERIC_CHARACTERS.

  Is it possible to insert: insert into values zahl (12.45);

  If so, what needs to be done.

  DATABASE 11203

  AMAZON

  You cannot insert with a comma, because it means that you have two values.

  You must use TO_NUMBER ('12, 45', '999G999G990D00',' NLS_NUMERIC_CHARACTERS = ",". ")

  Concerning

  Marcus

• Inserted path the mouse does not work

  I need to create a demonstration from a computer that is not installed on my Captivate. So I took some screen shots and placed on slides. I need to insert the mouse movements as if I had made a recording of the demo. When I insert a mouse is useless. I can only move the end location and when I run the slide the pointer can't even follow my way. It is in the upper track. Anyone know what is happening here?

  Hello

  But this isn't a bug. It's normal. ONLY the first slide where the mouse appears in the project allows you to control the starting and ending points. Every slide that follows you will just change endpoint. The starting point is determined by when the mouse has STOPPED on the previous slide.

  Full motion slides can throw a zinger in this operation.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Application of insert number

  Hello

  Please check this query

  I get the error message

  INSERT INTO OT_ENTR(OT_Date,EMP_DPT,EMP_SEC,EMP_ID,EMP_NAME,EMP_MOB,EMP_ROT,EMP_WTP,EMP_WHS,EMP_STM,EMP_ETM,OT_PUR) VALUES

  (To_Date(:P16_DATE,'YYYY/MM/DD'),: P16_DPT,: P16_SEC,: P16_EMP_CD,: P16_EMP_NM,: P16_MOB,: P16_ROUTE,: P16_WLIST,: P16_HRS,: P16_STIME,: P16_ETIME,: P16_PUR);

  "ORA-01858: a non-digit character was found here where was waiting for a digital".
  

  URL https://apex.oracle.com/pls/apex/f?p=4550:1:0

  Name of the workspace - THERESE

  username - test

  password - test123

  Kind regards

  Thérèse

  Hi @upen.

  First of all, you tried to throw your date format "YYYY/MM/DD". If you have correctly inserted 8 December 2014 ' for OT_Date, means that the format that follows you to your database to date is "MM/DD/YYYY" format, so you need to replace To_Date(:P16_DATE,'YYYY/MM/DD') by To_Date(:P16_DATE,'MM/DD/YYYY'). Another, try converting your digital input for EMP_MOB, EMP_WHS, EMP_STM, EMP_ETM to / integer.

  If this does not resolve your problem, try to print your entries for tracing. You might have missed the orders so that the values are mixed up. Paste the track here for us to see. Good luck!

• Insert page number in the footer

  How is - a insert number into the footer of a document from the Page?

  Evolution of salvation,

  5 pages has three fields in a header or a footer. Aligned left, Center, right.

  Click in the field where you want the page number and Menu > insert > Page number (and the number of pages if you wish)

  

  

  I had a look at your other post (how to insert a line over a foot of page)

  How to put the line above the footer area?

  and I couldn't find a way to insert a row above each paragraph, not the entire footer:

  

  Bad luck!

  Maybe someone else knows how to do this.

  Kind regards

  Ian.

• HP envy 15 E3S19UAR turn off touchpad software, when I insert the mouse

  Hello

  I want to disable touchpad when I insert an external mouse. This notebook is not shortcut that Disable Touchpad.

  I installed the synaptics version: Windows 8/7/XP/Vista-64/32-bit Edition v17.0.19 , this download link: http://www.synaptics.com/en/drivers.php. But it is not correct.

  When windows updated "- input - Synaptics PS/2 Port Compatible TouchPad Synaptics. I do not disable the Touchpad.

  My laptop:

  HP envy 15 ts: E3S19UAR, use windows 8.1.

  Please support me!

  Thank you best regards &,.

  MrJone.

  It seems that your computer is not installed a valid driver Synaptics ClickPad. Please uninstall any "Synaptic" currently installed drivers. Reset. Then download and install the Synaptics TouchPad Driverprovided CV. Reset. Make sure the driver is installed and the control panel displays a "Synaptics ClickPad SMBus. Open 'Mouse' to again Control Panel and follow the instructions above to disable the ClickPad on fixing the external USB pointing device.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Keyboard/mouse

  Hi, I have a HP S3541 [UK model number] and mouse and the wireless keyboard provided the two "Act to the top". Intermittently, the ladies of the keyboard off letters completely / is slow to respond and the mouse is the same, lapse nervousness and almost like 'time '. Only, I bought this system 5 weeks ago. I tried "test center" in HP Advisor and the 'good' but keyboard is not working properly. They are both less than 1 meter from the screen/computer and since 'odd' new. I ' ts my first keyboard/mouse wireless and at first glance, it was 'normal' but it may not be. Ideas or are they just rogue copies?

  Thanks for any help,

  John.

  stc31669,

  Try the procedure described in this article from hp:

  http://support.HP.com/us-en/document/bph07178

• Computer failed to recognize 'Expert MMO Gaming Mouse Razer Naga' after each reboot.

  I have a razor naga, I had Software Web site that work very well for the pilots.  I had install a 2.0 synap every sence when I start my computer with my pc does not but the razor on the rise. I have to unplug the mouse and plug it back it to this work.

  Original title: Razer Naga Expert MMO Gaming Mouse

  Hello

  1. What version of the Windows operating system installed on your computer?
  2. What is the model number of mouse?
  3. What is the make and model of computer?

  Try the following basic methods and check after each method:

  Method 1: Run hardware and devices Troubleshooter.

  Method 2: mouse, touchpad and keyboard with Windows problems

  It will be useful.

• TZO refuse my request for accommodation once I insert the MAC address of my camera!

  I tried to register with TZO for the first year, which comes for free! After I insert number of MAC address of my camera, I get an error message on the site that says: -.

  "

  There is an error on the previous screen.

  A trial has already been created for this Mac address. Please enter the Mac address with care.

  Click back to make corrections

  ".

  I never tried to register with TZO before yesterday. Despite having bought the camera in January this year. There is nowhere I can see the TZO site to communicate with them, but in any case it is the Linksys who sold me the service. Anyone have any ideas on how to solve this problem?

  All responses welcome.

  Thank you.

  MB

  If you go to the TZO site, they have a page about us, check for contact information.

  Click on the link below and that you'll get there if you do not

  TZO About Us Page

• Mouse buttons and mouse steelseries wow mmo.

  http://shop.SteelSeries.com/us/index.php/mice-us/world-of-Warcraft-MMO-gaming-mouse.html

  I'll try to keep it as simple as possible for maximum understanding.

  It's the mouse I. It has 15 buttons. Two of these buttons are used to windows mouse buttons 4 and 5. of course, the two main buttons are left click and right click. but all the other mouse buttons serve as buttons on the keyboard, and it's VERY embarrassing when it comes to the key combination of spells and attacks because it will take buttons away something I already linked to something on the keyboard. How can I get the rest of the buttons on the mouse to resemble the mouse 4 and 5 and have their own number of mouse button? by example, button mouse 6, 7, 8, 9, 10, 11 and so on, to make the keybinding much easier if they are considered separate buttons instead of keyboard shortcuts.

  Hi Precision,

  I'm not aware of a way to make this work.

  It seems to be a hardware limitation.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tactile mouse does not accept Batteries

  As soon as Windows 8 free a little less than a year, I bought the normal mouse touch Microsoft. It has served me very well and I love it like a mouse in general. Unfortunately, a problem just occurred and I can't seem to find all the reports a similar problem online. The problem is that the touch mouse does not accept batteries, as if the battery slots are broken. One thing I want to emphasize is that the slots in the battery were always very tight; It has never been easy replace the batteries, and I found myself using objects as levers to raise the batteries sometimes. Today, I want to replace the batteries and it is a battle to get them out, but not so much of a battle that I thought I was never damage the mouse. However, the mouse now does not seem to accept the batteries and battery slots are so tight. I can actually shake the batteries in the mouse now. With inserted batteries, the mouse will not illuminate; It's as if the slots in the battery becomes elongated. Maybe something happened on the springs in the back (which seem to be not at all, but pieces of metal springs)?

  Thanks for any help or advice you can give.

  Hello

  The question you have posted is related to Microsoft Touch Mouse and would be better suited to the hardware support Microsoft.

  You may need to check with the Microsoft Hardware support for more information.

  http://www.Microsoft.com/hardware/en-in/support

  I hope this helps you solve the problem. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• The mouse click on the increase

  How can I set an action all the increase in the number of mouse click in a text field (instead of type 1, 2, or 3)

  Thank you

  Of course, it is possible. For the button that increments the value, the mouse upward script could be:

  Script mouse upwards

  getField("text1").value += 1;

  Similarly, the script of the mouse to the top of the button decrements the value could be:

  Script mouse upwards

  getField("text1").value-= 1;

  But you should replace "text1" with the actual name of the text field.

• Page number

  Hello

  I need help, insert page numbers in my form.  It's a fluid layout, so it must be automatic.  I tried to use "Insert" > "Number of current Page", but that the option is greyed out on all my pages, including the master page.  Help, please.  Thank you!

  Laura

  Hi Laura.

  In fact, I can answer a question! I am a novice so I often ask

  I got it work on my fluid form, placing it on the Master Page, a text field. In the field, I typed 'Page', then went to Insert > number of Page current, typed "from", then insert > number of Pages. It looks like this... Page # of #.

  I hope I helped!

  CJ

• Link hit number

  How can I insert number of hits on a link on a Web page? See the example below:

  http://wvuband.org/submit_a_url/big_east_conference_bands/

  I agree typical hit-counters are a waste of time. But I think we all sorta missing the point here. The page he linked to does not show a traditional counter, but rather a list of links and a series of counters that show how many people have clicked on these links. It's a little different. It is not followed visits on this page, but rather how many outgoing clicks.

• Number of records expected

  Hello
  
  Is it possible in an ODI interface to set a number of records expected, the interface must return at least.
  I need such option and - if the number of records is less than the number expected a warning should be included in the journal.
  
  Does anyone know if there is such an option in ODI?
  
  Thank you
  H.

  Hello H,

  A few questions:

  If the interface does not when (record inserted) > (number of records expected).

  Next, if the warning message should get in operator or (in a flat file or a table).

  If you want the warning in the flat file or a table then its easy:

  Keep the interface in a package. Add a variable after the interface where you can find the number of records inserted for a purticular
  interface using the session in work rep information.
  as
  Select NB_INS
  of 'SNP_STEP_LOG '.
  where SESS_NO =< %="snpRef.getSession(" sess_no")%"="">

  write a procedure where
  -case when var_val > (number of records expected) message so inert in tablename end

  Thank you
  katukota