GTX 980 and no splash screen

Similar Questions

• GTX 980 and first Pro CC

  Hi all

  I have a GTX 980, I activate the use of the GPU in the preferences of the project, when I read a video, the red bar is replaced by the yellow bar.

  However when I apply an effect on my video, as for example, stabilizing my red bar once more, which means that the GPU is not asked if I'm not mistaken.

  How to make the GPU is used?

  Thanks in advance it's quite urgent.

  any effect that has the icon of the acceleration must use the gpu. the red color on the chronology does not mean gpu, but rather real-time playback isn't likely.

  Red, yellow and green make bars and what they mean. First work Pro area

  

• Someone at - he heard of this? Text of boot and BIOS is distorted. Random characters in the BIOS and the splash screen are off by 2 in alphabetical order.

  After a recent accident, my screen is distorted during boot and in the BIOS. Random Charactersa are replaced by a different letter, that is, the periods are replaced with commas, 'Windows' may appear as 'Walker', 'restarted' as 'Reqtarted' and 'Network' as 'Letuoriini '.

  It seems that the characters are disabled by two in alphabetical order, appearing as A, D, appearing as a B C.
  At first, I thought that it was a mistake to video card, so I updated the driver. I ran three separate programs of the antivirus (AVG, MBAM and Hitman Pro). Nothing came.
  Any advice? I can't post specifications of material right now, as I write via the phone, but will provide later tonight.

  After much trial and error, it turned out that my graphics card was at fault.

  The original accident occurred during the loading of Arkham City, which has always been a little bit of lag on my system. As he had been executed more slowly than normal, I installed a driver updated for it. No improvement, except when it is trying to run anything that has used its installed engines, (PhysX, DirectX, or any more complex than the Minesweeper game) or the card system would be plant or generate error messages.
  So I ran several antivirus programs, nothing unusual came. Biting the bullet, I formatted the drive and reinstalled Windows XP.  The computer works, but need several resettlement programs. During the restoration, the distorted letters are returned to the starting, development not being able to get in Mode safe without extreme distortion after the start.
  Until the moment where it loaded with a mobile slider on noise static/white/random color.
  I had almost given up hope until it appeared. Since the PC started normally, it wouldn't BIOS or any other material.
  My secondary fan came unplugged, and the fan on the graphics card had stopped working. After switching to the card mother VGA, distortion had disappeared.
  Final diagnosis: overheated graphics card.

• I just installed the lightroom upgrade 5 when I opened and a splash screen indicating lightroom made available but if I'm doing something of this answer. How do I overcome this?

  I installed upgrading lightroom5 and the opening I get a screen indicating the availability of Lightroom, but when I try to activate this all becomes unresponsive. How do I overcome this?

  Download the latest version 5.7.1 here: Windows, or Mac and install.

• GTX 980 + GT 120 (Mac) on a MAC PRO 5.1 (2012)

  Need help to install a NVIDIA GTX 980 and a GT 120 (Mac version) in a MAC PRO 5.1 (2012).

  See:

  NVIDIA Geforce GTX 980 Setup

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• MAC PRO and Geforce GTX 980 ti

  I just bought a ti GTX 980 (only not flashed to mac). My MAC PRO 2010 IN Yosemite 10.10.5 system is supposed to have the latest drivers from quadro 4000 and k5000 as web base drivers where my new ti 980 should work, but the only response from switching on the computer is a black screen. I don't know what I have to do to get into the system or activate the drivers. I don't like to see the logo of apple or bootcam. I want to just use it with mac.

  My card is GIGABYTE 980 ti

  Help please

  Thank you!!

  Please read all THE information on all the links. You NEED to install drivers for this card.

  
  

  From:

  http://www.macvidcards.com/store/P49/Nvidia_GTX_980_Ti_6_GB.html

• Alienware 18/w 2 x GTX 980 M 8 GB problems SLI - 8 beeps and no video now detected

  Hey everybody,

  I picked up a 'is' 18 with 2 x GTX 980 m 8 GB cards discreet alienware.

  When you first start up, I got the dreaded "8 beeps" and a black screen.

  I did a lot of online guides, and all said that one or two video cards must be bad.

  So, I opened it and removed the two cards and then tried to turn on without all video cards, which works 100% great.

  I think I tried put 1 card in slot 1, and turns, but in BIOS, Manager devices, GPUz etc, the video card is not detected.

  I tried the same thing with Slot 2 only and the same problem.

  I also tried to reinstall just the two and I still had 8 beeps.

  These video cards are worth about $500 + each, so I'd like to find a way to at least get a job if possible.

  Someone at - it ideas?

  Thank you!

  Both cards video with SLI cable, everything works correctly! Wow!

  For all those who come to this page, here is my best explanation of what was the fix:

  Remove the battery, remove the video cards, maybe reinstall OS, replace the battery so that the video cards are out, update BIOS to later restore the default BIOS settings, reinstall the video card (1 at a time).

• M9452p Pavilion lock, restart the HP splash screen and freezes

  My HP Pavillion M9452p primer, I can connect and I ran a program to copy a disc.  the system froze, then went through the process of restarting and froze on the splash screen for HP.  Rebooted the system by closing doen ran diagnotics and received a message "BIOS4 Boot error, contact the HP support" what dio I need to do to fix this?

  Tried system restore and system recovery using the F8 key start, but he did not, it ran very slow and then rebooted to start HP with the F10, Esc, F9 and F11 options and froze both times.

  I just replace the HD two months ago, and it works very well. I just removed all the component and repluged everythignback to gether, ran diagnotics and everything that happened, but still have the same problem with freezing and restarting the HP splash screen.

  Motherboard?

  Mounted with different lock forum, freezing, etc.

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• How to make a different splash screen and loading gif using visual studio?

  Hello

  I use visual studio to develop my application webworks.  In my screen config.xml, I see a spot that says loading screen.

  I want to do is have a splash screen at startup up and load a gif to the remote page.  I can't separate the 2 here.

  The start screen and the gif are different images.

  Thanks for any help

  What you are looking for is not vascular supported by the features of the screen load.  This is a screen of loading stated in all scenarios.

• How to remove blackberry 10 splash screen and put our own

  Hello guys,.

  I want to remove the splash screen specific/inbuild for the blackerry device and want to put my own splashscreen for my application. How can I reach it? Any help would be appreciated.

  Thank you

  Dev

  Open the file of the bar - descriptor.xml and go to the Tablet 'Application '. Them you can change the application icon and the splashscreens.

• Size of icons, application and splash screen

  Hi all, I wanted to ask you, what is the best icon size and the size of the screen splash for blackberry webwork?

  That's all, so thank you :-)

  If you wanted to say with the word 'size' is resolution.
  icon: 64 x 64px
  for the splash screen: depends on the screen resolution of devices.

• How to keep images splash screen specific for the portrait and landscape mode. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape

  How to keep specific splash screen for portarit and landscape mode images. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape.

  The two are different

  When the user holds the phone in portarit specific Portrait image should appear

  Similarly when the user holds specific landscape landscape image must be indicated without changing the quality of the image.

  IAM answer showing 1 portarit boot image using the

  Hi srk2012,
  You cannot apply 2 different splash screen inames for OS5, 6, 7.

  Check this link https://developer.blackberry.com/html5/documentation/rim_splash_element.html

  Thank you best regards &,.
  Laurent Subudhi

• After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I do not see the screen

  After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I don't see the screen, please help

  Hello

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  Follow this path to a Safe Mode system restore:

  "5 ways to boot mode safe Windows 8 & Windows 8.1"

  http://www.7tutorials.com/5-ways-boot-safe-mode-Windows-8-Windows-81

  See you soon.