Inspiron 546 double beep, orange, no video, flashing continues with the new ram

Similar Questions

• 1 beep long... After installing the new Ram, Windows XP... Help!

  Hello

  Not familiar with computers, but I recently decided to upgrade the RAM on my very old Windows XP HP Pavilion s7320n Desktop. Initially, it came with 2 x 512 RAM mp. I would like to upgrade to 2 x 2 GB RAM. All I get is different unique long beeps, no startup screen lights up when I swapped the Rams either. I tried to use the two Rams to 2 GB at a time and only one of 2 GB of ram in each slot and still do not work. What seems to be the problem?

  Here are the specs of my computer

  Base processor

  CeleronM 380 (D) clocked at 1.6 GHz

  • 400 MHz front side bus
  • Socket 479

  Chipset

  • Intel 915GV

  Motherboard

  • Manufacturer: Asus
  • Name of the motherboard: PTGV-DM
  • HP/Compaq motherboard name: Onyx2-GL8E

  ↑ before I continue I want to say thank you 'Stuart W J' for helping me out, you've been very patient and helpful.

  -So I downloaded determinative scanner and below is the part specifications I need.

  The module size: 2 gb Kit (1gbx2)

  Package: 240 - Pin DIMM

  Feature: DDR2 PC2-5300

  Data sheet: DDR2 PC2-5300, CL = 5 Unbuffered , NO ECC DDR2-667, 1.8V, 128Meg x 64

  -Then I looked in some Rams and came up with the one below, are the similar specifications?

  Memory size: 2 GB

  Memory technology: DDR2 SDRAM

  Number of Modules: 2 x 1 GB

  Memory speed: 667 MHz

  Standard memory: DDR2-667/PC2-5300

  Error checking: ECC

  Signal processing: did not enter

  Number of pins: 240-pin

  You need memory no ECC - Crucial agenda!

• Why when I import video into adobe Premiere cc, audio of a previously edited video is played with the new video?

  Can someone help me understand why when I import a video to a DVD in adobe first cc, audio video is a former edited video.  I can't know, audio and video, to read the file.

  What is going on?

  Thank you! I'll try that and you know how it works.

  Mary

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Flash CS3 with the old flash files

  I'm using flash to make the files that play other swf files that worked very well problems...
  Problem 1:
  What I have are swf files are a preloader that loads another swf inside file. They play very well until I tried to put them in a html page. This is how they have been all along, in an html page, and they worked. somehow now the SWF (the preloader that loads the swf file) will not play, just white. (example of this is on points following page to the left click down the face with sunglasses on this subject http://www.christykarpinski.com/videos/myeyes.html )
  Problem 2:?
  I tried to make new files with the same preloader model that I had used before, but with newly made swf files loaded in it and he won't play at all.
  
  So I tried to make a new preloader file (found a model online) and used this but it happens just to where I was in problem 1. they work, but not once I put them in the html page.
  Problem 3:
  I tried to make new files flash with the new loading until a former SWF preloader and it won't play properly. (here on this page, click on the second square in and then your suppose to be able to click three times and get different images - this employee to work - http://www.christykarpinski.com/videos/myeyes2.html)
  
  But if I do load a new SWF works fine (except as noted above, not when I put it in an html page)
  
  I guess Im wondering if all this has to do with the help of CS3 now and old files deployed on CS (or could even MX I don't remember now)? no idea at all would be great. any ideas what I can do?
  
  I'm sure ive left something, it's a bit overwhelming trying to keep all straight. and frustrating

  That must be it. I could not get to work with the new model preloader, he just had a lot of mistakes. but when I used the old model preloader, it worked fine.
  Thank you!!!

• How is it with the new iOS 9.3 I can't send a video via iMessage?

  I have an iPhone 6 more with the new iOS 9.3 installed a few hours before. I have problems with sending video via iMessage. I have tried both directly through iMessage by tapping the (camera icon) to the left of the body of the text, this in turn, I select what video to send and somehow, it is not visible in the body of the conversation in iMessage.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus. I then type the "selection" function in the upper right, I then select my video and the entrance after the contact data in the address bar, there is no button 'Send' on tap.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus.

  iPhoto or Photos?   iPhoto is not compatible with the iOS 8 or newer. Have you tried to share the Photos.app?

  There are complications with the iOS 9.3 update. Apple is aware of them and be released hopefully soon a bug fix.

• H8 1241: problems with the new video card on h8 1241

  OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.

  http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

  When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).

  Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.

  Help, please!

  Hello

  The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.

  Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.

  A NVIDIA GTX 660 new or used may be your best bet.

  Thanks for posting on the forum.

• Animate CC 2015 permanently convert / crash Flash CC 2015 with the new update?

  Thanks for your help today because I know that a lot of questions are flying around with the new version of Animate.

  I noticed that when I updated my 2015 CC Flash to animate, my Flash CC program has entirely disappeared. I discovered this by looking in my folder window Program Files > Adobe. Looking for Flash does not come to the top with no results either.

  This isn't a problem at home, but at my day job, conversion more I work to lead teams of developers can take a long time. With those who are still using the Flash CC 2015 for the moment, this update can do team difficult process as animate the recorded files can not be opened in Flash CC 2015.

  It is indeed a permanent update? If it is a permanent update, is there any future support to help keep Flash CC 2015 in order to contribute to this process of transition?

  Thanks for your time!

  These two are complete, available on the creative cloud app installers and can co-exist independently on your system. However Animate CC 15.1 being a superset of Flash CC 2015, it shouldn't really be an advantage in keeping both.

  The files will remain compatible Animate and Flash. Of course, content created using the new features on Animate may not be recognized by older versions of Flash and must aid appropriate.

• How do 'Video on layer' to the new adjustment layer IT as default.

  How do 'Video on layer' to the new adjustment layer IT as default.

  Thank you

  What version of photoshop are you using?

  In recent versions, you can go to window > adjustments and click on the Clip to layer and this should be the default value after that.

  

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Computer does not start with the new video card

  Hello

  I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

  The video card is
  Sapphire ATI over-pants 2460

  I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

  It seems to me to have the latest version of the bios and windows 8

  What can I do else?

  Thank you very much

  Best,

  Korhan

  Hi JM,

  Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

  Your PC comes with one of the following built-in Intel graphics drivers:

  • Graphics Intel HD 4400 (GT2)

• video hangs with the new card in an old Slimline s3500t

  Hello! I have a slimline pc t3500 and changed a noisy gs9500 for an asus fanless hd 5450. now I can't watch the flash and all of my video players fall opening any avi or other video format. But it's awful quiet. Any suggestions? How can I update, because the correct video card driver is already installed. Thank you very much. Oh, and I am runnig Vista home 64 bit everything to date. What is my power 180 watt? Otherwise, the pc works fine and graphics show without aberrations.

  Ububoy, I hear what you say.  However, if the 9500 GS came with the computer it was probably manufactured according to the specifications of HP to use less energy.  This is how HP makes video cards work, that the manufacturer States use more power, in their computers.  The HD 5450 is even more power than some of the PSU design can handle.  You can try to unplug all unnecessary components (CD player, USB components, etc) to see if that helps.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Problem of Flash Player with the BBC News site

  My HP Pavilion laptop has a specific problem with the BBC News website.

  When I click on a video, it starts loading and then stays black. Our other PCs and laptops do not have this problem.

  The parameters are defined as the BBC help advise. It is possible to watch videos on other sites.

  I use the reader most recent Flash (uninstalled, installed again), Windows 7.

  The problem is the same with Explorer, Firefox, Opera, chrome.

  Please who has an idea of what I might try next. I tried too many forums, help and (re) install.

  Wow, I have solved my problem! Not with the help of the BBC and Adobe sites,

  just after the hard try several settings. It appeared that this global settings is not accessible when you right click on the video window. I got another window of Global setting than on the Adobe Flash site.

  The people at Adobe: why is that?

  Go to;

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

  Set

  "Allow content to store data on your computer third Flash.

  Problem solved

• Watch a vid on utube, then clicking another video utube, it opens the same video that I watched the new page earlier.refreshing, I have the chance to see the right vid.fix pls?

  freshly installed win7 64 bit with the latest Adobe flash player and win7 updates.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".