Inspiron B130 doe drive CD-RW/dvd does not work

Similar Questions

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Cannot find CD/DVD drive in my computer on Device Manager. CD - DVD does not work

  I recently discovered that my CD/DVD drive does not work. It worked fine before. Tried to burn a CD in iTunes, but the error message says that the software or the CD device could not be found.

  My CD/DVD drive does not appear in the computer or Device Manager. I have read a few forums and tried to delete upper and lower filters, but that no longer works. Help, please.

  I am running Windows Vista - it came installed on my computer when it was purchased.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• CD/DVD does not work on Pavilion dv7

  Hi, I have problems with my DVD/CD drive - it does not work. The charger opens upward and when you insert the disc, it make noise running, but nothing fits. When I opened my computer tab there is no indication of CD.

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  

  Kind regards

  DP - K

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• HP 6450 b HARD drive in secondary Bay does not work

  I bought a HARD drive caddy to mount a drive to expand on my HP 6450 b (Win 10) using the connection of SATA DVD ROM.

  First with SO HARD drive is a WD 250 GB SATA 2 3 GB/s.

  I see my product spec TEC and I chose a HARD Seagate 500 GB SATA 3 6 Gbps drive to put in the caddy as a secondary HARD drive.

  I mounted the caddy with the new HARD drive, but it does not work: initially, the portable green light turn on, but does not Society. Without any error message, after a few seconds the led become yellow and green for some time and after that the PC turns off.

  When I put off the caddy with the secondary HARD disk, the OS starts correctly.

  I read similar posts in the forum and I have:

  (1) check the option in the BIOS to activate the secondary HARD drive is active (in FACT, it is enable)

  (2) turn off the launch of the er disk HARD secondary (DONE)

  (3) test on the HARD drive (in FACT, it's OK)

  I tried to set up in BIOS the SATA 3 GB/s speed, but I can't find the option. I see that someone has done this action.

  That would be the problem?

  I also think that could be a problem with drivers to support the new secondary HARD drive, but I don't know how to do.

  Is there someone who could help me?

  Thank you

  Andrea

  Andrea_Mogni wrote:

  New test: the pc does not start if I put on the caddy without hard drive.

  I think it is proof that the problem is my caddy.

  I would also come to this conclusion. Request a RMA number for that one and find another brand.

• DVD does not work error message CDDCDW TS-L633N windows G - 72 7

  I've been using HP inside the computer, I was told I have a problem with my windows G72 7, the number who came to fix is CDDVDW TS-L633N I need help to fix, drive DVD My simply not want it work appers to load but nothing shows

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• my dvd does not work

  When I insert my dvd nothing happens no answers from pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my cd/dvd does not work I get a code 10, the devices are not detected what do I do to fix these problems

  I went to the automated correction, it but still no change

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD does not work under Vista

  I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

  Any help is greatly appreciated

  Hello

  Reader might indeed have gone wrong.

  Check with support from Compaq and their forums for known problems.

  Compaq - Support
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Fourms
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• [Inspiron SE 7720] UEFI boot from USB does not work

  Hello

  I just bought a Dell Inspiron 17R 7720 special edition. It came with a Windows preinstalled 8 (up to 64 bits and mandatory boot UEFI). I want to use Linux (specifically, Archlinux) for the work and Windows for games, so double boot is necessary.

  I'm almost finished installing Linux except for the boot loader: I need to start Linux from UEFI and has failed to do so far. Here's what I did after I got the PC:

  • Secure Boot disabled;
  • updated the BIOS to the version A12 (maybe I shouldn't...);
  • resized the main Windows partition and created a few partitions for Linux;
  • legacy startup mode and managed to start an installation of Archlinux MBR bootable USB drive.
  • most of the system installed
  • switched back to UEFI boot mode, Secure Boot off.

  At the moment, I needed the UEFI kernel startup Setup Bootstrapper to have access to the EFI environment variables. So I created an installation of Archlinux UEFI-bootable USB drive (with a FAT partition) but so far I could not able to boot successfully to this car of UEFI instead of Windows 8.

  I think I tried every single combination, such as:

  • different USB ports;
  • different startup entries created with F2 installation boot, with different parameters.
  • different commands for start-up entries;
  • has hit my startup entries directly in the F12 boot menu.

  Anything in the startmode of the system always the Windows partition UEFI.

  Also, I couldn't find any relevant documentation manual or software on the A12 BIOS on the Dell site, I missed something?

  The solution that the user described in this thread for UEFI boot on a DVD has not worked for me with a USB key.

  If anyone had the same problem or has a solution or even information about it? UEFI is really starting to give me headaches on this machine!

  Thank you for reading.

  Try to go into the Advanced Boot Options.   Hold down the SHIFT key while as a RESTART to win 8.  This will get you to a page that will have an option called "Other devices" (from memory).    Choose that and you will have all features of the device as USB. First of all give it a try and I'm sure there is an easier way to start Linus directly more later.

• Windows 7 reports as "Not true" after replacement drive. Windows Update does not work. Any idea?

  I got a report that my drive was in imminent danger of failure.   Bought and made a direct disc-copy of the old disk cloning.    Everything seems to work fine, but now I'm getting the pop up that says Windows is "not true."    Windows shows as active, and nothing I've tried will stop the pop-up.  Worse, Windows Update does NOT work, and without running a few updates, I'm dead in the water for the use of new devices.

  I ran MGADiag.   Here is that content.   Any help is greatly apprectiated!

  ----------------------------------------------------------------------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3615725035-2700926363-1652036055Dell Inc.. Inspiron 1545 Dell Inc.. A11 20090827000000.000000 + 00070FD3607018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 100100Microsoft Office Enterprise 20071264BC76978749586GW6PzcEVEDTVKeO5Ym5UUm41dBk =89388-707-0441865-6559414100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3312009
  Installation ID: 004293808462381663381400261494038926624675101980836995
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 22/06/2015-13:55:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 6:22:2015 11:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqj + MrAO2jOkW3YOKB9UbRq90qZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• CD/DVD does not work on gateway NV53 running windows 7

  I know that this was published last year, but the responses, I've tried.  Run a repair on my pc does not work either because despite how different CD/DVD I put in the drive not "detected" any of them. The green light showing it tries to read the disc, but never makes it past the jerky noises.  The disc icon may appear for a second but never sticks... nothing works.  Please all responses as given precedents.

  Hello

  Looks like a hardware problem, I suggest you to contact the computer manufacturer for assistance.
  http://support.gateway.com/us/en/support/default.aspx

• Keyboard Dell Inspiron 7537 after reboot (or start-up) does not work

  Hello!

  I have a Dell Inspiron 7537. New installation of Windows 8.1. All drivers and updates for the installed BIOS Dell form site.

  After I restart (or turn on) my laptop, sometimes keyboard does not work. Only the special buttons as light keyboard or airplane mode to work. All others - letters, numbers, etc. of the win-key will not work.

  Question is completely random and not possible to recreate on purpose. Maybe a week without this problem, or can happen tomorrow.

  What I tried:

  1 reinstall Windows

  2 removing and reinstalling Microsoft form of default keyboard driver in Device Manager.

  3 update BIOS

  4. run integrated Dell diagnostic utility (spent)

  5 disable quick start setting and allow him to return.

  I have a strong feeling that it's a software problem.

  At the moment the problem is still there. Can someone give me some advice please?

  After the upgrade to Win10 - didn't notice any problem. Thread can be closed.