HP 6450 b HARD drive in secondary Bay does not work

Similar Questions

• New hard drive and CMD R does not work

  Hello

  My old hard drive crashed while I bought a new one.  I tried restoring the internet and it goes through the process, but I just get the apple logo that stays for hours.  Can someone point me in the correct direction.  I am assumeing that I need to make disk utility but I can't seem to him so that I can format the drive.  I also have a snow leopard but startup disk that gets the same results of just the apple logo.

  reset the SMC, PRAM and NVRAM on your MBP

  http://www.Macworld.com/article/2881177/how-to-reset-your-Macs-NVRAM-pram-and-SM c.html

  How to reset memory NVRAM (or LANDAU)

  If your Mac does not start properly or one of the functions listed in the previous section is strange, you can perform a simple reset of your Mace NVRAM or PRAM. Your Mace NVRAM or PRAM reset Resets the data stored on its default setting. (Note: as always, we strongly recommend having a full backup of your important data before troubleshooting your Mac.)

  The process to reset the PRAM and NVRAM is exactly the same thing. Just follow these steps:

  (1) turn off your Mac.

  (2) (2) tourner turn on your Mac, and when you hear the ringtone to start, immediately press and hold the Command-Option-P-R keys. (Note: you can use a wired keyboard to reset).

  (3) holding the keys until the Mac restarts and you hear the startup chime for the second time, and then release the keys.

  After resetting the NVRAM or PRAM, you may need to reconfigure some of your settings of Mace. If you're still having problems with your Mac, you may want to consider resetting the SMC.

  What is SMC?

  On Macs with Intel processors, SMC is system management controller. The SMC chip controls your function of sleep Mace, various lights and indicators, speed of the fan and keyboard backlight power among other things. So if your fan Mace is out of whack, lights are misconduct, he answer correctly when the lid is closed, or the Mac not turn on at all, you might want to reset the SMC. (Note: again, be sure to have a full backup of your important data before resetting the SMC)

  How to reset the SMC in a MacBook with a non-removable battery

  (1) stop the Mac.

  (2) connect your power adapter to your Mac and a power source.

  (3) with the Mac turned off, press shift-control-Option and press the power button at the same time.

  (4) release all the keys and turn on your Mac.

• HARD drive external "this device does not work correctly"Code 10"

  Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

  I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

  The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

  Need help please!

  Hello

  Method 1:

  See the link and check if it helps:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• Windows 7 reports as "Not true" after replacement drive. Windows Update does not work. Any idea?

  I got a report that my drive was in imminent danger of failure.   Bought and made a direct disc-copy of the old disk cloning.    Everything seems to work fine, but now I'm getting the pop up that says Windows is "not true."    Windows shows as active, and nothing I've tried will stop the pop-up.  Worse, Windows Update does NOT work, and without running a few updates, I'm dead in the water for the use of new devices.

  I ran MGADiag.   Here is that content.   Any help is greatly apprectiated!

  ----------------------------------------------------------------------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3615725035-2700926363-1652036055Dell Inc.. Inspiron 1545 Dell Inc.. A11 20090827000000.000000 + 00070FD3607018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 100100Microsoft Office Enterprise 20071264BC76978749586GW6PzcEVEDTVKeO5Ym5UUm41dBk =89388-707-0441865-6559414100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3312009
  Installation ID: 004293808462381663381400261494038926624675101980836995
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 22/06/2015-13:55:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 6:22:2015 11:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqj + MrAO2jOkW3YOKB9UbRq90qZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• IdeaPad s10-3s drive easy XP camera does not work

  After the link on the top, I found all the XP drivers for my netbook s10-3s after installation, simple camera does not work. any idea on how to solve this problem? Thank you

  Problem solved
  It's really weird
  Open easy-Lenovo Camera(Make sure you install the drivers first though it wont work after installation) > Device Manager-> right click-> update driver-> click on "No, not this time"-> next click-> Choose 'don't search, I will choose the driver to install'-> choose "USB video device" and then click Next.

  That's all. But I can't yet find AMP.exe to run it so I'm going to Skype to test. Works well.

• Drive HARD TOSHIBA CANVIO 3.0 does not work with USB 3.0 ports

  Hello

  I bought an external TOSHIBA HARD USB3 CANVIO 3.0 disc MORE.
  I and laptop computer from other manufacturers that support USB3. When I connect the USB2 HARD drive it works and I can copy or paste my files but when I connect the HARD drive to the port USB3 that it doesn't work and my laptop cannot detect HDD with USB3.

  I've updated my driver USB3, once again, but when I connect it to USB3 just turn on the blue light and nothing more.

  Please tell me what can I do to solve my problem?

  This link is my HARD drive type and model: http://storage.toshiba.eu/cms/en/hdd/external_drives/

  Thank you

  Have you tried to contact support for laptop and ask whether something should be activated or changed for this port USB3.0? Maybe some BIOS settings.

  If possible, try to check the functionality of some other USB3.0 available PC/laptop.

  As much as I know there not something special that will help you. It is Plug & Play device.

• Satellite M70 - after HARD drive partitioned, the OS does not start

  Hello

  Good then this is a real doozy, and I hope that someone will help.

  I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

  Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

  I rebooted, and then after Windows restarted again completed.

  NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

  If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

  I'm really angry that this has happened and I just want to start over again.

  Can someone help me with this?
  I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

  Help, please.

  Thank you
  SG

  I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

  To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
  Check it!

• Pavilion dm4: replacement failure of hard drive, the recovery disks does not

  A few moments ago, I started getting a message that my hard drive was not so I purachased a new hard drive and also decided to upgrade the ram. When reinstall drive serves screen says its loading files, then after the progress bar fillsthe computer screen is empty, the hp logo comes on the screen, while she just repeats what was just described. Don't know how to do this, pls help if possible.

  troupe20

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on problems to do a restore by using the disks and wanted to help.

  I know this may sound weird, but at the time of Win7, I would have problems installation or upgrade of PC, if there is too much memory system.  So, what I would say, it's to put the old memory and see if that makes a difference.  I know it shouldn't, but it could.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• New hard drive in Windows XP does not recognize

  So I got a Windows XP SP and I want to connect an external hard drive. It does not recognize the hard drive but do not appear in my computer as Samsung (i). This just appeared once. But now, whenever I have connected to the computer again, he appeared as removable disk (e :)) and I can not delete all the files in there.) I tried to use the add hardware, but he found nothing and is not solve this problem.

  And if it serious, my computer is slow. Thanks for any help.

  Hello

  You are welcome!

  Good to know that the problem is solved. Let us know if you need assistance related to Windows and we will be happy to help you.

• Memory full. HPW to identify and remove duplicate files. great western digital external hard drive is that it is not working properly

  hsving obvous problem assostated with little or no space drive. slow operion of progtams "program does not" and 'unable to write' trusted sites.

  Sometimes when the hard disk becomes incredibly full, you can even copy files to an external hard drive. In such cases, simply pull the disk and put in a USB external hard drive case. Attach it to a working computer and copy the data in this way, either on a drive in the system of work or another external hard drive (it will be slower). Delete the data out of the full disc. MS - MVP - Elephant Boy computers - don't panic!

• When you plug the hard drive, Windows Explorer says does not not and closes all applications

  When I connect my hard drive (which has more than 70 films) my watch windows Explorer does not and it closes all active applications. I can't open my disc... hard help me...

  * original title - when I connect my hard drive (which has more than 70 films) my show windows Explorer does not and it closes all active applications. I can't open my disc... help me hard... *.

  Hi Adnot

   

  Method 1:

  I suggest to connect the hard drive, then try to run the security analysis. You may need to disable all autorun feature, if you use the drive. Then, try to perform security analysis and check if you have any viruses or malware present.
  See the link below for the analysis and verification.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  You can also perform a clean boot and check if you can open the hard disk properly. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Power light / hard drive/battery Inspiron 5759 does not?

  Bought this computer from my wife for Christmas.  Apparently, Dell has combined the power of disk hard/light activity indicator / and the battery status light in a unique light on the front edge of the computer.  My concern is that the only light briefly when I plug into the power supply first, then it turns off and on again never.  Even when the hard drive is written or the bedside lamp lights to show activity.  Is this normal?  I am concerned that this is a way that I used to determine if things happen on my computer as it should.  If the light is not designed to show the disk activity hard when it occurs, what is it?

  If you have not found the answer to your question, so this should help you.

  Press and hold 'Fn' which lies between the Ctrl and Windows Key, then press the 'H' button  This action will be necessary every time that you restart the computer.

  Don