Inspiron e1505 backlight goes out when turn brighter

Similar Questions

• HP Pavilion 6500 goes out when the power adapter plugged

  My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

  any ideads what the problem would be?

  any help is much appreciate

  Thank you, rayandmaura

  Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

  I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused

• Satellite M55 goes out when you disconnect the power cable

  Hello

  to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

  I did some research and my problem seems similar to that detailed here in this post.
  Maybe someone knows the solution for this problem?

  Thank you.

  Hello Luke

  As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

  I fear unfortunately there is nothing you can do alone.

• Light goes out when you convert stereo camera 3D rig

  Hello

  I built a scene in CS5.5, everything works fine as long as it is supposed to, I added a point of light to make the scene as it is lit by a single bulb.

  Each layer is a 3D one, it's all good.  I have added a camera and gave him a nice soft track in the whole of the scene.

  When I go to convert the camera in a stero platform, the resulting comps left & right back to the original appearance, i.e. the light disappeared.

  I don't see anywhere that says somehow doing what portage light through stereoscopic, but is it a magic box that needs verification, or is this a bug?

  Thanks in advance to all.

  5.5 running on a mac pro, 10.6.8.

  Mike

  You must copy your light layers and paste them into the left and the eye right comps.

  The other option is to disable collapse transformations in the left and the eye right comps. I'd rather copy the lights, unless the movement of the camera is very subtle. We could call it a bug, but it's really more of a workflow problem.

• Left Side of LCD gets Darks after being turned On (Inspiron e1505/6400 SXGA +)

  Hi all

  My inspiron e1505 now has a dark band on the left side of the
  LCD on an inch and a half. I recently traded in a new card mother Dell sent me because my old laptop was an annoying hum. Install the new motherboard and I noticed this dark band on the screen after a certain time of use. If I then I traded in my old motherboard thinking, it was the replacement of Dell , the origin of the problem, but now the group is also present with my old motherboard.

  Is the LCD monitor goes wrong or is this a problem of dimmer? The Group made the left side of the screen darker appearance.
  This is particularly visible in photoshop when the bottom is proven
  gray.

  Ideas or thoughts?

  
  

• I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  Your manual is here...

  FTP://FTP.Dell.com/manuals/common/Inspiron-6400x_owner%27s%20manual_en-us.PDF

  Extract from page 74...

  Enabling/disabling the wireless network adapter

  NOTE:

  If you are unable to connect to a wireless network, make sure you have all the components for

  establishing a WLAN (see "What need you to establish a WLAN connection" on page 70), then check that your wireless network card is enabled by pressing on .

  Tricky

• Inspiron e1505 will not do anything.

  I was given an inspiron e1505 and it not work when people who had it and put a way. When he took over the battery was dead and they plug and battery does not charge and it will not be powered with the AC adapter. There no lights come on nothing. The adapter works. I plug it into my other laptop dell and it market. So it isn't the power adapter. I know they told me the cpu over heated once because the wind was block with dust but they clean and it work after that.  What I've done so far is taken on the battery and the laptop on the left battery it unplug two hours and put everything back in and nothing happen. So I'm lost. Hope that someone out there may be able to help. Thanks for any help I can get.

  You can try a reset:

  Remove the battery, hold the power button for 30 seconds with the system disconnected and remove and reinstall the memory modules and hard drive.  Attempt to light only on AC - if it will be, but is not installed battery, the battery is defective part.

  If it still doesn't turn on then the answer is probably here:

  "I know that they told me the once over heated cpu because the wind was block with dust but they clean and it work after that."

  All it takes is an episode of overheating damage to the motherboard.

• Dell inspiron w / xp sp3 stops when the lid closed only in mode standby

  Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual.  Why is it turn off in standby mode?  Happens in AC mode and battery.  is it a software problem or a hardware problem.  I see others with the same problem and vista dell.

  http://support.Dell.com/

  Dell support.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell

  http://en.community.Dell.com/forums/

  Dell forums

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite P200-1 webcam darkens when the brightness decreases

  Hello!

  I have a little problem with this f * ckin' camera: when the sun goes to bed, and when the brightness decreases, my cam become dark (on msn, for example)

  I installed the latest drivers, but the problem is still there... you have a solution?

  Hello

  Maybe you should check this FAQ from Toshiba:

  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  It s recommended to use night Mode, if the room is dark or if there is not enough light

  Check the document! I'm sure it could be useful and helpful!

  Welcome them

• The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  The standard weather app on my iphone 6 has stopped working.  It shows just my wallpaper grayed out when I try to access.  The app can be restarted or deleted and reloaded?  If so, how?

  No, the soft part of the operating system, so it would mean reload the iOS together. Have you tried a forced reboot yet?

  Close all open applications by double-clicking the home button, and then drag to the top of the application window until it disappears from the screen.

  Reset your device: press and hold the home button and the sleep/wake button until the screen goes black, and you see the Apple, then let go. (No data loss)

• LED backlight display off when the power supply is connected

  Basically, what happens is every time others or so when I plug my T420 in power, the backlight of the screen turns off completely. The screen is always on because if I look close enough I can still see whats on the screen. All the other power lights, Thinklight and other indicators remain on. I can't tell if this is a problem of motherboard, power supply problem or something different, but the problem is very frustrating because I put the computer to sleep and then wake it up back up to continue to use the machine. Any help is appreciated.

  Using the search I found this:

  Link to the Knowledge Base

  This problem is well known and seems to be a hardware error. Then try to contact the after-sales service and send in your thinkpad. Or you can use the workaround described in the link above.

  Moderator edit: link fixed.

• MASTERED OPTION IS GRAYED OUT WHEN YOU TRY TO BURN A HOME PC PREM BRAND NEW VIRGIN DVD + R ON VISTA 32-BIT

  Due to virus I had to rebuild PC using the RECOVERY partition on hard drive. All windows updates have been applied to date (August 2011). Before the virus problem (July 2011) WAS able TO SELECT THE "MASTERED" OPTION WHEN YOU are GOING to USE WINDOWS TO BURN a VIRGIN DVD + r. NEW once AGAIN, this WORKED BEFORE, NOW THE MASTER OPTION IS GRAYED OUT.  I have a brand new DVD + R blank and tried several of them thinking it was the disk (I've used this same brand (magnavox) DVD + R 4 years now never this problem of the "controlled" option is grayed out.) I use the same DVD burner which came with the PC and it allowed me to select the option "Mastered" last month (July 2011). I am using Windows HomePrem 32-bit OS (originial system that came with PC and this allowed me to select the mastered option last month. I applied all the updates Win at present. I have no other problems with the PC. Once again, driving the nail: this WORKED BEFORE, last month on the exact same hardware and the software/OS (Juillet2011), then why this option appears GRAYED out now?  This question has been asked before and 'experts' simply stressed totally USELESS MS pages showing how to select either under control or direct - I DO NOT NEED THIS HELP as I ALREADY KNOW HOW TO SELECT either option and what each is for. Also the other 'fixed' DOES NOT APPLY to this situation. (Do NOT send me to the following links because they DO NOT ANSWER to THE QUESTION: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/burn-a-disk-mastered-is-unavailable-grayed-out/9eb41f09-1778-e011-8dfc-68b599b31bf5?page=1&tm=1312314316719#footer or http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/mastered-format-option-grayed-out/aee1469f-1095-436c-9f12-acce80c2bb99.) These 2 links DO NOT ANSWER THE QUESTION, so answer the question, do not send us in circles, always looking for the answer.  How SIMPLY THE QUESTION IS: Fix us the radio button for 'Mastered' so that it is NO LONGER GRAYED OUT when you insert a brand new, clean the DVD + R in my DVD burner (same that I had for years, which worked before) on my Vista 32 bit OS HomePRem? I have a host of (222 blank GB) of disk space and a lot of RAM (4 GB) and again I WAS able TO select the "mastered"option before my restoration." Help!

  Hi RandyDonaldson,

  You can check out the following link and try the suggested steps to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/DVD-burner-is-recognized-but-cannot-burn-files/5b4adffc-06e7-4813-923e-7f69628a8a53

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• How to get what the current backlight time-out is set?

  Hi all

  Work in 4.2.1. I would like to be able to arbitrarily increase the backlight time-out and restore it to what the user he had initially set when I'm done. Looking at the API of backlighting (i.e. backlighting. getTimeoutDefault()), apparently I'm only able to recover the default delay, which - as I understand - would be different from the time delay set by the user.

  So my question: How can I get the _current_ time-out setting? Otherwise, looks like that I would not be able to always set the time-out period back to what the user had selected through their setting of BB menu.

  Thanks for your comments!

  There is no BlackBerry API that provides the setting specified by the user backlight time-out.

• Help to install the new HD in Inspiron E1505 laptop

  I hope someone out there can help a computer illiterate like me.  I have a laptop Inspiron E1505, which had a bad hard drive.  I ordered a new hard drive but also computer replacement discs.  Physically, I installed the new hard drive.  The discs I have are:

  1 DVD for the resettlement of Dell Inspiron computer software (content: * drivers * diagnostics and utilities).  I put this disc in my dvd player and ran the events (memory and system), and all.  I don't know where to go from here

  2 reinstallation DVD - Microsoft Windows XP Media Center Version 2005 with Update Rollup 2

  3. to reinstall Cyberlink PowerDVD 7.0 software

  4 Creater Roxio MyDVD Combo THE.

  Can someone walk me if this process?  I am absolutely distraught.

  TY TY!

  
  

• Help!  Audio goes out of sync after export.

  OK, people. I need your help. I have a looming deadline of THIS FRIDAY to put this.

  I have a multicam editing over a show that runs 1 hour 20 minutes. It renders perfectly in the timeline panel, all the video and audio perfectly synced. Looks and sounds exactly like what I need.

  When I export the video in form file H.264, audio not get synchronized with the video of 13 frames! But that's not all... It doesn't go to the complete audio track. There are about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and end of the video is aligned perfectly in sync. It is just the central part which is twisted.

  What should I do?

  This has never happened before, and I have worked extensively with multicam in first Pro CC before that. Never been a problem. I tried to uninstall and reinstall the first and also remove all media cache files, but still no dice.  I also tried to copy the clips in a new sequence in the same project, copying the clips into a new sequence in a NEW project, the nesting of the sequence... nothing works.

  My configuration:

  MacBook Pro retina (Rev A)

  First Pro CC (latest version)

  Panasonic GH3 images in 1080 p 24 p AVCHD timeline

  3 cameras & 1 audio file to WAV in Multicam

  Any help would be greatly appreciated!

  OK, I figured out how to fix it:

  1. In first Pro CC, choose SEQUENCE > DELETE RENDER FILES.
  2. Try to export the movie again.

  It worked! I exported the same sequence, and it took a lot of time to do a new rendering of the audio files, but when it was finished export audio and video are in sync. I don't know what caused it, but this fix, so I hope anyone else having this problem can save a lot of time in reading this.

  See you soon!