Inspiron E1505 Vista no sound after update

Similar Questions

• WhatsApp sound after update ios10

  Hello, after updating to ios10 my sound of whatsapp is identical to my e-mail (threetone). In whatsapp, I chose a different tone but no matter what I do, its always the threetone. Can someone help me with this? Best regards, Gerard

  Have you updated the Whatsapp application lately?   A couple of days, they have released an update for iOS 10.

• I had to reformat after an attack from windows xp repair. No sound after updates

  I had to reformat after an attack from windows xp repair.  After the installation of Windows and all of the things drivers worked very well.  After updates, no noise.  So I reformatted again, installed Windows and all the drivers except the sound.  Done all updates, and then made the hardware update for my sound card in Microsoft.  Its worked. Tested with the music of the sample, had all of the clicks et al.  Then I restarted the cpu.  Turn off its worked, the turn is heard started and stoped the half way through.  No more sounds.  I tried all the round he took back on things.  Can someone help me.  My cpu is a Dell XPS 400 Dem, card his Creative SB Audigy 2 ZS (WDM)

  I think I'll try another sound card.  You pc is quite old and components go wrong.

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• Videos playing only with the sound after update 49.0.2

  After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

  It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

  This may not take effect until the next time that you exit Firefox and start it again.

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• All sounds broken on Vista 32 bit after update Flash

  I am a technician working remotely on a 32-bit computer to Vista with SoundBlaster X - Fi Audio extreme. Flash player updated automatically throughout the night in version 11.3.300.271. No sound does this morning, including Windows Media Player, IE, Chrome, etc.

  We used Flash uninstaller and then tried to play a sound on Windows Media player. Still no sound.

  We have reinstalled the latest version of Flash Player. It installs without problem, but it still does not work.

  We checked the event viewer. There are no related events. We checked the Device Manager. There is no missing drivers. We checked the volume controls, they are all very well, the value of the correct audio output and speakers, volume to their max now, levels etc.

  Any ideas?

  It turns out, somehow, I thought it would be, as it was a user error. Their speakers were disconnected.

  I asked the user if they tried to headphones and they said yes. I suspect that they plugged the headphones on the speakers that is not helping solve the problem.

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• I lost my sound after updating my audio and video drivers

  After the download and installation of updates of my audio and video drivers, I lost my audio device. My Volume mixer, I get the message "no audio device is installed". At this point, I am really confused and frustrated after sent to websites other than Microsoft to get answers. Any help will be greatly appreciated.

  I have updated drivers AMD and ATI Radeon, neither of which are on my task bar more as they were before the update.

  I use "Windows Vista Home Premium Service Pack 2" at the moment.

  Model: HP Pavilion dv7 Notebook PC
  Processor: AMD Turion (TM) X 2 Dual-Core Mobile RM-72 2.10 GHz
  System type: 64-bit Operating System

  Hello

   
  I suggest you to follow the steps in troubleshooting section and check if it helps:
   
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  Also, follow the steps from the link:
  Don't fix no sound or Audio problems in Vista
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00833257&tmp_track_link=ot_recdoc/c00898606/en_US/c00833257/loc:1 & cc = us & dlc = en & lc = en & Printable = yes & product = 18703
   

• Vista Windows slow after update

  I recently installed all new updates for windows vista (Home premium 32) and after that, my computer got real slow (for example start-up took about an hour)... Is it possible to fix this without reinstalling windows?
  Thanx

  Gabriela

  Hi gabriela86,

  Thanks for posting a response to answers.microsoft.com

  Instead of re - install Windows, why not try using the boot minimum process to refine and isolate what is causing the slowness of the system, be it a program or a service.

  Here is a link to troubleshooting with the boot process.  Try step 1, and then see if you encounter the problem, otherwise go to step 2 and so on and so forth until the issue is isolated when it is isolated post causing the hang up in the forum and we you search with you.

  After the diagnosis is made, please make sure to follow step 7 in the boot process to ensure that you have your system booted to a Normal State.

  Starting in MINIMAL MODE troubleshooting section: http://support.microsoft.com/kb/331796

  Thanks again for posting on the forum.  Please let us know on this issue so that we can help you.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista blue screen after update

  So I had update during a routine traffic stop of my compy (who was btw custom assembled by a friend and has worked perfectly for a year). I got the install updates and the button stop, then left for a few hours, thinking that it would update after a few minutes. I came home, and he had not yet determined a percentage of completion yet. SO I thought it was frozen/not going to work, so I unplugged it (I know it says not to do: P). so now so now when I turn it on it goes to the screen to stop and lets me choose if I want to start in:
  safe mode
  SafeMode w / networking
  safe mode with command prompt
  last known good configuration
  normally

  I tried all of this and they all take me to a blue screen that says:
  STOP: c0000218 {Registry file failure}
  registry cannot load the hive (file)
  systemroot\system32\config\SOFTWARE
  or its log or alternative
  It is corrupt absent or not writable

  data collection for the crashdump...
  initialization of the disk for the crashdump...
  beginning physical memory dump...
  Dumping physical memory to disk:

  I don't have my instillation of windows disk because I heard that it comes with a repair disc which should solve this problem.
  I tried to make Internet and I couldn't make them work
  I tried to make one with the "recovery disk creator" on my new computer laptop sisters. he wouldn't let me continue the program, even if it charged because my computer is not a product of toshiba

  I have full of ideas on how to solve this problem.

  Recovery disk/s on other computers will not work on your.

  Try to use the ERD below.

  If this does not work, contact your computer manufacturer and ask them to send you a set of recovery Vista disc/s, or ask for help in using your recovery Partition; and do a Vista reinstall.

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.
  Mick Murphy - Microsoft partner

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vista - video problems after updates

  I went to shut my computer down about two weeks ago and he told me there were four updates, so I gave in and went to bed. The next morningarting the computer problems started. There seems to be a problem with the graphics and it could freeze after a while. I had the same problems with another computer just after having updated and he had taken home. They told me it was the graphics card and replaced it under warranty. I found it strange that both computers had the same problem at the same time. Given that the extended warranty on this computer was just exhausted I took to another store and after explaining what happened and work on it for three days, everyone came to the conclusion that it was the updates that caused remember there was nothing they could do! So I searched the Internet for a solution and found that it is a common phenomenon. Now I'm supposed to just buy a new computer? I don't have much that won't happen again with a new computer, given the frequency of this problem seems to be trust.

  Never install any Windows updates hardware drivers.

  Get them form the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Inspiron 3442 Maxx Audio problem after update of Windows 10

  I have seen a lot of posts on this same problem with Maxx Audio in Windows 10, however, I tried to fix it by trying different solutions, that users have given and I had no chance. I uninstalled the driver and reinstalled the Dell expects W10 and Maxx Audio controls do not work. Someone said that they have installed the old drivers for W8.1 and it worked again, I tried it and the controls are there, but when I try to disable Audio Maxx, it does nothing and I close the window, open again and the bar is activated if, it turns off. No idea if I'm doing something wrong? It's a problem very annoying for me since I work with many audio and now it sounds just awful! :(

  Much to my anger and regret, Dell didn't send any form of notification NO update to the platform Windows 10 and I did, then reverse it after seeing what a nightmare Windows 10 has, however, not only is now my audio DOES NOT WORK, but my departure to the top and stop sequence is ruined as well as on my laptop Dell.  I tired many times to count to reinstall the drivers for the audio, but it doesn't seem to recognize the audio driver of Dell on Microsoft which is also... UGH... Help... I WANT ONLY THINGS TO WORK AS BEFORE...

  SOMEONE THERE IDEAS FOR HELP?  THANK YOU FOR THE MILLION

• name of product-HP Pavilion dm1 Notebook PC, you hear no sound after update window 8

  name of product-HP Pavilion dm1 Notebook PC

  product number - QB382PA #ACJ

  After the update for a few days, I could hear the sound of my laptop. now I'm unable to get sound and same card for my sound device. Help me solve this problem. Thank you.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Alarm brings more sound after updating iOS 10

  The alarm makes more no noise. I updated my phone a few days ago and initially, it worked, but now when the alarm "goes off" there is no sound. The volume is on and more strong, the phone rings when someone calls and other notifications make noise, but not alarm. Even when you choose a different alarm, no sound (usually, you hear a sample of the alarm). That I am I doing wrong or what happened?

  Same problem, restart a phone help but only for a few days...