Inspiron One 2205 all-in-one does not just seeing

Similar Questions

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  Hi bakhytz,

  Could you please check if the opacity is set to the maximum value and feather is set to a lower value in your spotting tool parameters.

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• 7510 photosmart e-all-in-one does not print

  I had setting successful place Photosmart e-all-in-one printer 7510 when I bought first. Super easy to install and I print wireless all the time.

  I recently moved and tried to uninstall and reinstall the printer so that I could print wireless again. I did exactly the same thing to install because I did the first time and it doesn't work. I went through all the steps help and may not know what the problem is.

  1. the printer is turned on.

  2. the printer is certainly connected to the network. No problem found on the wireless network test.

  3. my computer is not connected to a virtual private network.

  4. the computer and the printer are on the same network. Name of the network on the wireless network test is the same name of network connected to my computer.

  5. There is no firewall does not block the detection of the printer.

  6. the wireless router is not in a bad state of operation. If it were, I would not be able to get online, right?

  7. I do not use the 'connect a new printer' resettlement.

  8. I don't know that I downloaded the appropriate software drivers.

  I don't know what else to check. The only thing that has changed is the router and the internet provider. I got the same laptop before I move. Everything works fine print/scan when connected via a USB port.

  You're not the only one having problems with the SBG6580.

  Your internet provider has other available modems?  (not motorola)

• Envy20 d030 than all in One does not start

  A week ago, after I downloaded Win 8.1, I received a notice about the HP updates.  I did the updates, but the next morning, the computer does not start and the ports or the CD player also would not work.  I tried F10 and F12 but got nothing.  I do not remember the specific message there was, but it would not move from the initial start-up phase.  I took it to a repair shop and they told me that the BIOS has been altered, as well as areas of the hard disk; the 4 MB of ram card was also burned (we had a lot of lightning, so I don't know if that had nothing to do with this and no more than technicians).  The MOBO extracted fine.  I replaced the hard drive and let the 2 MB of ram.  Everything seemed fine.

  Yesterday, I tried to replace the features and specifications of the factory.  I was last updated drivers and rebooted the computer to complete the installation of the system, but the computer wouldn't even start.  HP turns on but it then immediately goes to an error message "no boot disk was detected or the drive failed.  F10 and F12 nothing else that the CD player and the USB ports seem to be ok.  I remember that the updates was a BIOS.  When you perform this update there was a message to be formatted a sector of the hard disk (sector F) but has no so I cancelled it.

  Data sheet (current): Envy20 d030 Touch Smart All-In-one

  Windows 8.1

  64 bit

  2 MB of Ram

  1 TB harddrive

  I hope this is enough information for someone to help me.  My questions are; That's happened?  How can I solve this problem?  If I order a HP recovery package that will, as much as there is a new hard drive in the machine.

  I'm very frustrated about that.  Not only by problems and my loss of use of my computer, but also costs I hired.  I have had many computers and I'm pretty tech savvy but nothing like this has ever happened to me before.

  Thank you

  Pat - D

  Hello again Pat-D,

  The recovery disks will be won't on which hard drive you have installed. Your computer comes with a 1 to SATA HDD with a rotation speed of 7200 RPM. If you have another hard drive in there and recognize your computer, you should be good to go.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Office Jet 5610 all in one does not appear with the fax

  I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

  Hello

  Try this maybe this will help.

  -Type fax in the research - type on Windows and scan-new fax fax...

• HP Office jet Pro 8600: 8600 all-in-one does not print

  First of all, I'm very technically challenged...

  My printer is connected by radio to two computers. The two are not able to print anything. They have all two printed up to that we have a new computer in and then we worked for a little while and the other older. Currently, no work.

  Light on the port in the back where the ethernet cable is connected is in the lower part of the port and flashes intermittintly on top. The connection does not snap-in.

  It's probably a harware problem? Is there something I can do a simple test? Replace the port which can be done at Best Buy or other? The printer has 2-3 years and we loved so far... Thank you

  HI @Rosetree,

  I noticed that you are having problems printing to your printer HP Officejet Pro 8600. I understand that the problem started when you got a new computer. I would like to look into this for you today.

  We are considering the possibility that the new computer interferes with the IP address of the printer on the network. Let's see if we can identify the cause.

  I see that you mentioned in your message, wireless and wired. How is the printer connected? (Ethernet/WiFi)

  Here is a document that I recommend that you try, a view of the error "Unable to Find printer" for the HP Officejet Pro 251dw, 276dw and 8600 Printer seriess. "

  Try the HP print and Scan Doctor to identify and solve common problems when installing or using s HP on your home network. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages).

  Note: You may need to follow this guide for both computers. I recommend following it all the way and then try to print from both machines.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP photosmart c6180 all-in-one: does not print because some cartridges are empty

  I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

  Hello

  To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

  Kind regards.

• 7510 photosmart all-in-one does not connect

  Hello

  I desperately need help.

  My printer was working fine, then yesterday morning it just stopped.  I couldn't get the wireless connecting once again, so I uninstalled, re-installed, downloaded and installed the new drivers.

  NOW, when I go to set up on my mac, to add the device to finish setting up once again, does not appear the unit even if the wireless is connected.  When I print the Wireless 'report' everything is connected correctly, IP address works etc.

  Why it won't find my device?

  Thank you.

  Colette

  It worked perfectly! 1 million thanks!