Inspiron One 2330 and VGA/HDIM entry port

Similar Questions

• Dell inspiron one 2330 / 3 side buttons HELP! Please fast

  OK, I have a Dell inspiron one 2330 and I seem to have upset the 3 Volume up buttons and display off buttons when I press on, they do not work so I was wondering if anyone had a good image for example or directions where to go on the computer and how to activate the 3 buttons back on so I could change display composite hdmi VGA and use volume etc... I really need to use thank you if someone responds

  Hi, DELL-nice BC

  Ok. I also have this problem. And the BIOS updates did not help.

  But I solved the problem by downloading the Dell on screen display Application.

  Latest version.

• Replace the hard drive and OS re - install Inspiron One 2330

  Hello

  I had my all-in-one desktop Inspiron One 2330 for about 18 months.  I see serious problems with the hard disk, the system hangs, and the event log is full of HD playback errors.

  ePSA diagnosis shows code 200-0142 telling me to replace the hard drive.  The chkdsk utility runs and sometimes corrects problems and sometimes clean.  Such problems at low altitude, I'm surprised that I can start far enough away from launch internet explore and write this message.

  I called Dell support and they were kind enough kindness to send me the original floppy Windows 8.1 for the Inspiron 2330.  I have a disk hard solid state ready to install, and I saw a bunch of great videos from YouTube that explain how to open the case.  The HD swap is not a big deal, but I have a few basic questions.

  I know that many readers here know the answers.  Thanks in advance for help...

  1. If I install a blank HD in this installation media machine Dell recreates all of these crazy Dell partitions?  I have not of much use for them until I ran the diagnostic ePSA and it was extremely helpful.  I hope that you will tell me that if I do a fresh install, I get a new partition ePSA addition to 8.1 Windows on my replacement drive.

  2. I do not see why this machine won't support a SATA SSD SanDisk brand new instead the 1 TB hard drive that came with it.  Is it OK to use SSD drives in these Machines from Dell?

  3. have good links for the operating system Dell re - install procedure?  I will be installing Windows 8.1 on this drive.  Strangely I find no procedure to re - install step by step operating system.

  4. I have read that the activation key for Windows is now integrated into the motherboard of the machine somewhere.  Do I need to enter this key when I re-install?  I don't see all the stickers on my machine with the key.

  Thank you for your help,

  I finished the upgrade SSD in my Inspiron One 2330 with very little trouble.  Here are answers to the questions for those who find my post using original research.

  1. the Dell Windows 8 installation media disc does not any recovery disc partition, new, retail.  If you install fresh by booting from the DVD drive, you get a nice clean install of Windows 8 without any extras Dell.

  It seems that the diagnosis of ePSA is hosted on the motherboard of the system and not the hard drive.  I have had no trouble to boot in diagnostic mode to run tests of ePSA, even if I see any Dell diagnostic partitions.

  If you install fresh from Windows 8 media you definitely lose the Dell recovery partition.  No big loss.  It is a little strange to wait the software stored on the hard disk to help you recover problems with the same hard drive.  I'll just do another clean DVD media installation if this happens again.

  2. my SanDisk 256 Gb SSD is impressive.  It costs ~ $80 on Black Friday, and now my Dell Inspiron One 2330 boots in 9 seconds.  This is measured from fully powered down for the moment, I type my password to connect.  9 seconds - crazy fast.  Modernization of the best ever.

  3. my internet search found many useful message board posts, some web sites and blogs.  Unfortunately there is no official Dell Reinstall procedure that I could find.  The complete replacement of unplugging the power to see Windows 8 on the screen by using a new SSD was about 70 minutes.  I gathered the information I could find and guess the rest.  Worked for me.

  4 Windows 8 activation code is not necessary for a media of Dell Windows 8 re - install.  The installation process of Windows 8 should be reading the key out of the motherboard because I've never been invited to type one in.

  Here are a few other tidbits:

  5. the Dell Windows 8 media support I was sent by Dell wasn't Windows 8 and 8.1.  I spent more time pulling down of updates, restart and then installing Windows 8.1 on the app store that I did replace the hard drive.  Don't forget: some updates depend on other updates being present.  Really, you need to run the Windows update utility several times to get everything down.

  On the good side of things, my restarts are now long 9 seconds.  I have no problem whatsoever reset to any indication that the system needs to restart to complete the installation of an update.

  6. after obtaining my update to 8.1 Windows system, I installed all the latest drivers for the Inspiron One 2330, which could be downloaded from Dell.  This figure includes a BIOS update which has been a royal pain to apply.  To do this I had to create a start-up separated from 'BACK' USB key.  In fact, it is possible to create this rudimentary special boot using utilities downloaded from Dell drive.  Locate the "diagnostic Distribution Package (DDDP)".  Good luck with that.

  7 Dell backup and restore has been completely useless for the replacement of my SSD.  I have had two drives bootable USB thumb complete with full system backups, the backup restore and Dell refused to restore my data on my Virgin SSD drive.  The error message has complained that my new drive is too small.  It was laughable: my original hard drive was something like 95% of free space.

  8. There is a bonus in all this: by rebuilding your system using the original Windows 8 media, you get a nice fast machine without the excessive Dell bloat-ware.  I do miss the software pre-installed in all.  Glad to get rid of it in fact.

• Cannot read DVD on Inspiron One 2330

  I bought an Inspiron One 2330 in December and just tried to play a DVD without success.  If I put on a CD with pictures, it does not come to the top, but I can access all the photos if I open the file, but the CD does not come up on top of the office.

  I called the support Office and was informed that there is a software problem on a brand new computer.  Anyone know how I can fix the problem of grubbing-up of DVD on this computer?

  Okay, that's good. At least the drive works. Just need to understand why it will not play.

  What you need to do, is tell Windows what application plays your DVD movies. Click here for an explanation of how to set AutoPlay in Windows 8 options. When you get to the AutoPlay window, next to movies on DVD, you must select your DVD program. It could be something like PowerDVD.

  If you do not find a program to play DVDs on your computer, you can always try VLC Media Player (free). Works fine on Windows 8.

• Caching SSDS on Inspiron One 2330 turn on/off before/after backup Image C:

  My new Inspiron one 2330 works under 64-bit Windows 8 and SSD Caching-as put in place by DELL

  Before I run Acronis True Image 2013 to generate a backup Image of your hard drive, I need to disable the SSD Cache.
  Otherwise the restored Image cannot start successfully - because the content of the HARD drive would be incorrect.
  After the backup is completed and verified, I need to turn on SSD Caching.
  To do this, I want to insert a command-line command before / after the backup operation in the Acronis program options.

  So my Question is actually:
  What command line command (C: /...) can I use to make the switch or disable the Cache of 8 SSD 64-bit WIndows?

  Thank you!

  Hello Reinhard Klein,

  You can follow the steps below in order to dissociate the SSD cache:

  

  

  You can create an image with Acronis and then follow the steps below to reassociate SSD cache:

  

  Note: Dell has not tested or approve the use of Acronis True Image to create a backup of the image.

  I hope this helps.

• Inspiron one 2330 with problems (switching to 8 bit and video memory 0 MB) win 7

  OK, I have a few questions, I need some answers. I can't understand. I even updated drivers etc.

  problem 1 every time I restart my computer that everything comes from the great. Then the screen flashes black then appears almost in sepia. so, I have to continue to go to the resolution and change it to 32 bits. then its all fine.

  problem 2 is my system video memory 0 MB.

  get an idea of what is the problem? I even did a system restore, but it doesn't let me go to others a few days time. all these problems started just on their own. and I tried to fix it but nothing. a lot of help is appreciated.

  Hi lbcult,

  Run the system diagnostics to confirm the operation of the equipment. Here are the steps:

  • Restart the system and immediately start typing on the "F12" key to enter the "Boot Menu".
  • Press the "Down arrow" to select the option 'Diagnostics '. Press the enter"" key.
  • The diagnostics begin. Please note the exact error message / code, if everything appears on the screen.
  • You can also view the video on the link http://dell.to/17DCL0R for more information.

  In addition, follow these as shared in the video from the link http://dell.to/153NeEh. This will help us identify if there is any software causing this problem or not. Please update the video drivers to the system. Follow the common steps below to perform a new installation of video drivers:

  • Press the key combination 'Windows Logo' + 'R' key to open the "Run" dialog box
  • Type "devmgmt.msc" and click "OK".
  • Device Manager"Windows appears.
  • Under "Graphics cards", you will find the video driver listed.
  • Right-click on it and click on "Uninstall". (Check and note the driver installed on your system and re-install the driver in the following procedure as a result).
  • Check the box to remove the software.
  • Restart your system and click on the link: http://dell.to/15qqGcr
  • Enter the serial number of your system, and select the operating system.
  • You will find the video driver under "Video".
  • Click the video driver depending on the video card in your system. (Install the same video driver that you have uninstalled the "Device Manager").

  Once the driver is updated, update the BIOS as well. Click on the link http://dell.to/186NL9d and download the BIOS. Double-click the downloaded file and follow the instructions to update the BIOS screen. Restart the system and check the functionality.

  Note: Make sure that the adapter is connected before the BIOS update. Furthermore, disconnect any external devices before the BIOS update. All programs should be closed and saved documents.

  I hope this helps. Answer please if you have any questions.

• Dell Inspiron One 2330 AIO won't boot screen logo

  I tested new construction Insider look at window 10.  Everything worked and then Explorer froze and did not. I did a CTRL + ALT + DELETE and started the Task Manager to start Explorer.exe. But no reaction from the system in response to strikes. I was force to manually power off the machine.

  After that, now when I turn on the 2330 it turn on the fan internal and looking for the DVD player and goes to the screen of the Dell Logo just stays there. Stuck at the Logo screen. Start button / stop remains white. No matter what I'm doing, F2 and F12 while turning the power on, the computer does not respond. If I press the bar space a progress line comes under the logo and F12 will appear in the upper right. If I press F12 during this time, he doesn't think I'm for the start menu.  He's right there with the Dell Logo and it will stay like this for more than 24 hours or more, never a response.

  I unplugged the power cord and you press the power button for two minutes to discharge static electricity. It made no difference.

  It happened a day after my extended warranty expired. Last year I had this same problem and Dell sent a guy in my house with a new motherboard, which fixed the problem. Now a year later, my motherboard is dead again. And ideally for Dell, my warranty has elapsed the previous day, what is the problem with these motherboards? Why they keep breaking on me?

  Yes, it was the motherboard.  Dell tech came out and put a new in and everything works as it was before the MB has failed. Thank you rep Dell Rishi.

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• Dell Inspiron One HDMI question

  I have an Inspiron One 2320.  I tried to connect a TV as a second monitor.  To my surprise, the computer's HDMI port is a HDMI input port.  Am I reading correctly?  Can someone please help me and confirm that I can't use the HDMI port to connect to the TV?

  If it is in fact a HDMI input, what is - this really for?  What devices that require an HDMI port to send the signal to the computer.

  I am so confuse with it, and why even do a HDMI input and not a HDMI output?

  Thanks in advance

  I have an Inspiron One 2330 Touch.

  Other features include an HDMI port... A HDMI-IN port. It would be something like a Blu - Ray player, cable box or DVR amp HDMI out, Tablet... something like that... like the Inspiron is a simple monitor or HDTV.

  I was also surprised that the video output was only a VGA 15 pins. Maybe the next model will have a DVI output. At least this way, either natively or with a converter inexpensive... you can drive DVI, VGA or HDMI even (with no sound). DisplayPort is a versatile alternative.

  In your case... If your template does not output a VGA (or your second monitor is not a VGA input)... you should be able to get a "USB video card.

• Inspiron One 23 (2330) left the port rear HDMI is Indiana only, not RELEASED

  Hello everyone. I have a Dell inspiron all-in-one with Windows 8.1 2330. I want to connect a LG monitor via an hdmi cable, but it does not recognize. I am sure that the problem is the device of Dell, as with other devices, the connection works.

  The Inspiron One 23 (2330) left rear HDMI port is IN , not OUT. It is designed so that you can connect an external device such as a video camera and display the camera image on the screen of the Inspiron One 23 (2330). You will need to connect an external monitor to the Inspiron One 23 (2330) VGA port on the right rear.

  

• His use of the AIO Inspiron One HDMI input jack 2330?

  Greetings,

  I'm looking at the computer Inspiron One of AIO 2330 with the Core i5 processor. I understand that this computer comes with an HDMI port

  I can't seem to find information on what I could use this port for so I was wondering if someone could enlighten me. Specifically, I was hoping that he could've able to do the following. My TV provider digital tuner box using HDMI to connect to the TV. I was wondering if I would be able to snag one of the digital tuner until the HDMI in port on the computer and use it as a monitor for the tuner box?

  Thank you

  Gord

  Hey, Gord

  Yes, you should be able to do. Let me mention that I did on a XPS One 2720 system and the video was nice connecting the my set - top box HDMI signal. However, the audio did not work. In theory the HDMI can carry video and audio signals, so I don't know what the problem was. But the video part worked fine.

• The use of pins of status (4 outputs) and data (8 entries) of the parallel port pins at the same time.

  Hi all

  I'm a newbee in labview. As part of my project work, I need to get 8 digital inputs and send 4 digital outputs.so I think to use the Parallel Port on the pc.i can make use of 8 datalines for entries. I found the site NOR is it possible to use status for output pins. But is it possible to use status for output pins pins and data for entries to the time.please help even me also mention of the measures to take, or keep in mind while implementing.also include any example vi that could be useful.

  Thanks in advance

  I would recommed you to NOT use the parallel port. Now a day you have hardly a PC with parallel port. also if you have some old PC then most likely last version of LabVIEW (e.g. 2010) will need a lot more memory RAM and processor.

  If you want a solution very very low cost then I would recommend using an arduino to that effect. You can then download LabVIEW Interface for Arduino and start working.

  If you continue to use the parallel port, then you could try (I haven't worked with parallel port and have not tested the following solutions)

  Download VIPM and then install the enclosed package. It will add the port e/s palette in your labview. and you can use it.

• (Redirected) Office network 2330 and two in one?

  Can I use my 2330 all in one programs and data with a two in one. For example, I turbo tax 2330 and want to access a file of income tax, I work with my two in one, in another room. I have the wifi. Will I need a separate server?

  Hi Arneschonb,

  Please repost this in implementing networking and wireless support forum.

  http://en.community.Dell.com/support-forums/network-Internet-wireless/

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• How can I take one allows so-called data entry I ask is how much you have and back up this data in some way, and then the system will offer you different options

  How can I take one allows so-called data entry I ask is how much you have and back up this data in some way, and then the system will offer you different options

  Not with ordinary Muse. These things requires a dynamic backend with a connection database and in your case quite likely some substantial customization and programming.

  Mylenium