Inspiron sees the wifi connection, but doesn't connect - I tried everything

Similar Questions

• I've never seen the cloud on my watch symbolizing the wifi connection.

  I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

  Hi, Kristian

  If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

  • How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  To check the status of the connection of your watch, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
  • Slide down again to return to the watch face.

  To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

  • When within range of the network, turn off Bluetooth on your iPhone.
  • After pausing for a short time, check the status of the connection of your watch as described above.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

• What will I do if the wifi connection is interrupted during the update the new os 9.1

  I already download the new ios 9, but unfortunately the wifi connection and the update of the icloud setting was not able to go forward, what I'll do then its keep on update

  Try to hang the iPad to a computer and see if you can continue installation using iTunes.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• FP 6700: Hp 6700 loses the wifi connection

  Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

  Anyone have any ideas on how to solve this problem.

  Thank you.

  Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

• ConnectionFactory cannot create the WiFi connection

  I tried this code example, and it returns null ConnectionDescriptor when I only have the wifi connection:

  cf = new ConnectionFactory();
  cf.setPreferredTransportTypes(new int[]{
      TransportInfo.TRANSPORT_TCP_WIFI,
      TransportInfo.TRANSPORT_TCP_CELLULAR,
      TransportInfo.TRANSPORT_WAP,
      TransportInfo.TRANSPORT_WAP2,
      TransportInfo.TRANSPORT_MDS,
      TransportInfo.TRANSPORT_BIS_B
  });
  cf.setAttemptsLimit(2);
  cf.setConnectionTimeout(10000);
  ConnectionDescriptor descr = cf.getConnection("http://www.google.com");
  StringBuffer buff = new StringBuffer();
  if(descr == null){
      buff.append("no descriptor");
  }else{
      buff.append(descr.getTransportDescriptor().getTransportType() + ";" + descr.getUrl());
      try {
      descr.getConnection().close();
      } catch (Exception e) {
          System.out.println("===>conn close error:" + e.getMessage() + ";" + e.getClass().getName());
      }
  }
  

  I tested with the mobile network and it works well and returns the connection descriptor non-zero but when I try with the wifi only and always returns null.

  I tried to access Google.com on the bb browser and it opens.

  However, the connection is slow and it loads for a while before opening google. Is this the reason why I get null handle or its something else?

  Well I solved it.

  It turned out that I had activated the VPN profile to the wifi network. When I disable the code works ok.

  But this raises the question why can't make a connection http via wifi with active VPN profile. I can always open google.com in the browser.

  I'll make a new thread for this question.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• BlackBerry Smartphones BB Curve 9300 - how to prioritize between the Wifi connection and the carrier?

  Hi all, I have a question... How do we place on our BB unit to plug into a wireless network from first (if available) to browse and not them connected to the internet all the stuff instead of using our carrier, then at home or at work?

  There are no parameters for this on most devices, the WiFi connection will ALWAYS be priority for communication of data via the connection to the mobile network.

  Some rare machines with capacities AMU have an Option to set this priority. UMA is a service of only a few mobile providers like Tmobile.

• buy the full subscription, but still in trial version, tried the solutions proposed online but...

  buy the full subscription, but still in trial version, tried the solutions provided online but I couldn't find option disable/disconnect option by clicking on help in the application manager... I even tried uninstalling the Creative Manager of cloud and applications, reinstall and re-sign-in but still can't find the option to click on...

  

  It's not 'install' under 'find new applications' law yesterday before I paid for membership, I understand, the system needs time...

  I have check the application manager and I saw the difference today, but the buttons under "installed apps" has not changed, the expiry date is always there!

  and... I have to install everything in the evaluation mode! It drove me nuts to read online instructions on how to solve this problem, because I couldn't see the options that are supposed to be there that I followed the steps...

  I use a Mac Pro with OS. 10.9.5 X... Help!

  This issue occurs because of the connectivity problem. (You can see the steps from here: sign activation, or connection errors |) CS5.5 and later)

  1. In a Finder window, choose go > go to folder.
  2. Type / etc.
  3. Select the hosts file and open it.
  4. Save the hosts file: choose file > record under, save the file as hosts.backup, and then click OK.
  5. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
  6. Save and close the file.

  Once you remove all the entries in the hosts file 127.0.0.1 followed Adobe.

  Disconnection and connection to the creative cloud desktop application, see the link for the procedure: disconnection, identify yourself. Creative Office Cloud app

  Hope this will solve your problem.

  Thank you.

• I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  You must follow the instructions to download/install Encore DVD creating program, as long as the content of the library and put in place so that when you open it, you have all the stuff to work.

  Article download/install Adobe Encore:

  https://helpx.Adobe.com/Encore/KB/Encore-CS6-installed-cc.html

  http://helpx.Adobe.com/Encore/using/download-library-content.html

  Neil

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• My Smartphone/iPad can connect to the wifi network, but my laptop do not show the network.

  My smartphone and iPad have both work successfully on the wireless network, but my laptop (Dell Inspiron series n and Sony Vaio e series) does not display the network. The router * I use the modem is D-Link DSL-2750U. Computers that run windows 7 Home Basic. What should I do?

  Hello

  As you mentioned that you are able to connect the Smartphone / I Pad to the wireless router, but the laptop that is running Windows 7 does not connect to the router.

  First of all, try to run the network troubleshooter to see if it can help diagnose and solve your problem:

  See the provided article below for more information:

  Why can't connect me to a network?

  I also recommend that you go through the steps given by 'Kevin Hau ' April 24, 2010 in the link provided below.

  Problem connecting Wireless Windows 7 - No. available wireless connections

  See also:

  Wireless and wired network problems

  Hope the helps of information provided. We know the results.