Install a drive hard 3rd for HPE-501f?

Similar Questions

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• problem when installing bluetooth driver and software for windows 8

  I have a Samsung np355v5c-s05IN Laptop.I have windows 8 on my laptop pre-installed. Recently I reset my laptop then the Bluetooth driver and graphics software have been uninstalled. I got the software from Samsung which has helped me to install all the drivers and software is but he could not install the following Bluetooth and the driver. I have the software and the driver I tried to install manually but it was not original. I am enclosing pictures of errors. Please provide the solution for the same thing. I have a built-in Bluetooth of qualcomm atheros ar3012

  
  

  I found the solution. I uninstalled the unknown device in Device Manager. Then I deleted the bthport using cmd (Administrator). Then using the device manager that I scanned Bluetooth for windows and hardware changes automatically detected and installed the driver itself. But I want to know what was the main issue.

• where can I find support for installing a drive hard hitachi

  I'm working on the laptop of a friend (aspire 5253) who had a virus package root.  After spending hours trying to get out I decided to wipe the hard drive.  I glued the Win7 has begun the installation until I got the message BOOTMGR is missing. After moving to the front, the system is now looking for media drivers, most likely, hard drive...?  There is not a driver available for this portable device disc and the acer site has no driver, that he needs.  any suggestions on how to fix this?  THX in advance

  1. on another computer, download the tool and create a Windows 10 installation media.

  https://www.Microsoft.com/en-us/software-download/Windows10

  2. go aspire 5253 BIOS settings to activate the Boot Menu to boot from USB or DVD and then save/quit.

  3. start windows 10 support that you created in step 1.

  4. When you see the screen below, press SHIFT + F10, so you have access to a command prompt

  

  5. use "diskpart own", not only clean the hard disk, but also to put it in an uninitialized state (works for HDDs and SSDS)

  http://Forum.crucial.com/T5/the-CRU/reset-your-SSD-to-factory-settings-Windows-Diskpart/BA-p/162503

  6. Remove windows 10 installation and insert the media to install windows 7.

  7. turn off the computer (turn off the computer)

  8 turn on the computer and install windows 7.  Select custom installation.  Do not partition or format the hard drive.  Just click on the drive (unallocated space) where you want to install windows, and then click "next".  Windows setup will automatically partition and format your drive for you. (Or if you use an Acer recovery media, follow the instructions of Acer)

  9 Windows 7 drivers are here:

  http://us.Acer.com/AC/en/us/content/drivers

  --------------------------------------------------------------------------------------------------

  (Also, instead of install windows 7, you can install windows 10 If you want to give it a shot, but you will need to enter the key of windows 7 to a point, so you can activate the free upgrade.) It is difficult to say whether or not Windows will find all windows 10 drivers for your computer.  You may go directly to the website of component manufactures to find windows 10 drivers.  Acer does not provide 10 drivers for your computer... model and your computer may or may not work properly with windows 10)

  

  http://us.Acer.com/AC/en/us/content/Windows10-eligible-models

• Need driver drive HARD MK1637gsx for Satellite A210-17i

  Help

  I'm pulling out my hair with my laptop.

  He won a virus which resulted in a total relocation. However, I can't do what the HARD drive can be seen, but are not accessible. I can't create partitions or format. Loading disc for instalation of vista it clearly asks a driver but I search the internet and here's and while there are a lot of questions asking a person as provided the vital software.

  Can you help me?

  I would be very grateful.

  Hello!

  You use a Microsoft installation disc not the Toshiba Recovery disk, right?
  For Microsoft disc, you need the SATA/RAID driver. Have you downloaded?

  Also if you can not access the HARD disk I would check this with special tools:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Drive Blu Ray for HPE-140F

  I am looking for help to find and install a blu ray (game or R/W) drive in my HPE-140f.  Before I crack the case that I was looking to find info on the type of connection of the current drive to use, prefer an internal vs external USB 2.  I did install component PC before, but was hopingto find some information on the addition of components of this machine and the type of the specific interface for Blu Ray player

  Hello

  The procedure to replace an existing optical drive or add an additional can be found on the following link.

  http://support.HP.com/us-en/document/c01882216

  If you replace the existing drive, just use the same power and Sata connections for the new Blu ray player.

  If you add the Blu ray drive as an additional device, look for a free power connector is close to the one connected to your existing drive.  You will need to buy an additional sata cable to connect the additional drive to the motherboard.

  Kind regards

  DP - K

• Why my windows 7 installed on drive hard Seagate IDE goes into blue upon awakening from sleep screen while everything goes well when I installed it on the SATA hard drive.

  I did a Chkdsk/f/r hard disk and no errors not found. Is it because of the incompatibility of your IDE hard drive with windows 7 or other?

  Hi Auggy,

  I could not roll back the driver for GIGABYTE GBB36X controller, instead, I uninstalled the driver and now the problem seems to be resolved.

  There will be consequences if I ever install the storage controller driver and what is the use of the controller driver?

  Thanks for the comments.

• Where to buy drive HARD MK4019GAX for Satellite Pro 6100?

  Hi - I need a new hard drive for my satellite pro 6100, MK4019GAX part number. I have searched online but have drawn a blank. Any help would be appreciated. Thanks, Roy

  All devices, you can order from the Toshiba service partner in your country.
  As far as I know the MK4019GAX is a 40 GB ATA-100 HARD drive.
  You can also use an another 2.5 40 GB HDD.

• Satellite M30-S309: impossible to install the driver of modem for Win XP SP2

  Hi all
  I installed WinXP SP2 and after that, I can not install my modem driver?

  What is the problem?
  Is there a new driver for WinXP SP2

  Best regards

  Hello

  Do you have an error message or strange notification messages?
  It would be useful to know this.

  Bu the way: Please take a look at the driver Toshiba Europe page. There you should find a PDF of information update Microsoft Windows XP SP2. Some applications need to be updated after installation of SP2.

  I think it should help!

• Need to drive HARD trolley for hard drive of my Satellite L350

  Can anyone help?

  I need to get a caddy for my hard drive Satellite L350 try to save files there. Don't know what it is to what is an ide or SATA.
  Any help would be appreciated. I really need to try to save my daughter s wedding photos.

  Thank you

  What you need is 2.5 SATA HDD caddy. You can buy it in any PC or order by eBay store.

  A few months ago I bought one on eBay for incredible 5 euros only.

  If you can't find, let me know and I'll put the link where you can order one.

• given HP h8 - 1260T connect to drive hard 3rd

  I would like to add another disk sata hard to crack open in the 'hard drive cage"on my PC. There is an available power cable, but I see no data cable. There also doesn't seem to be anywhere to connect the data cable to the 3rd disc as hard disks 1 and 2 cables and 2 dvd/blu ray optical readers use the only available on the motherboard connections. Is there a data cable sata type 'y' should I use to replace one of the cables to the other hard drive?

  Thank you very much in advance!

  Charles C which worked perfectly... after that I figured out how to attach the sata cable! The new drive is formatted and I appreciate the help!

• Need a second drive hard "holder" for a Qosmio F30-141

  I bought the second hard drive (Toshiba 160 GB sata) for my Qosmio F30-141. There is no 'holder' (metal platform for mounting of hard disk) in the second slot. There is no "springs" protection too. How - he called and where I can buy things?

  Hello

  The hard drive carrier is available in your Toshiba dealer in your country

  Reference No.. P000457790 ASSEMBLY OF THE HARD DRIVE SUPPORT

  and you need 4 screws to fix the HARD disk and 1 screw to fix the door--:--.

  Reference No.. P000417800 TSCREW M3X4CR 4 live
  Reference No.. P000318000 M2.5X4BN 1 screw

  Note: You can Type the part number in Google and you will find many online dealers
  Kind regards

  Reaver

• Drive hard new for the car and recovery

  Hello

  I have a Pavilion dv4-2141nr S/N: [personal information deleted]. I installed a new model of disc hard WD WDBMYH0010BNC-NSPS, + 2.5 - inch SATA 3 Gb/s. I set the BIOS to start fron DVD/CD and it appears "no boot device - insert boot disk and press a key" on the screen. I tried to reset the hard drive several times and it always comes to the top. What I am doing wrong?

  Sorry, that didn't work.

  It could be a bad set of recovery discs, a bad DVD player, who knows?

  But there a sure fire way to know, if you're in the game.

  Make your own bootable installation of W7 Home Premium DVD.

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can use the support that you have installed windows (assuming that the set of recovery disks is bad).

  http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO Windows 7 Home Premium x 64 English

  Make sure you get the entire file to download.  Occasionally he sometimes displays a full download, but you don't have the file xx GB 3. integers download.

  Then use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.  This tool will also make a bootable media.

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you can boot from the DVD drive (assuming you make the DVD) so you can contact HP and ask to have your money back, or make another set of recovery discs you sent.

  If you cannot start from ther DVD once again, there is a hardware problem any.

  Try to put the ISO file on a 4 GB USB flash drive and if you can boot from that and install Windows, then you know that there is some sort of problem with the hardware with the DVD player.

• not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

  I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

  Following message comes when I run the Setup... (installation program downloaded from the website OR..)

  Runtime error:

  This application has requested to terminate in an unusual way.

  Please contact the application support is more information.

  Title of the dialog box is "Microsoft Visual C++ runtime library"

  Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

  Double post

• H9 - 1215t: connect a drive hard 3rd

  I have a H9 - 1215t with a motherboard IPMMB-FM (Formosa) (http://support.hp.com/us-en/document/c03132942 - 4 Sata connectors on the motherboard are used for 2 hard drives and optical drives 2.

  There is a SATA5 open (black) and a SATA4B3 (red).  It seems that these ports require a different SATA data cable that you used for the SATA - 4 ports 1.

  If so what cable is needed and can use either of these 2 ports to connect an additional hard disk Samsung SSD 850 PRO?

  Data cables Serial ATA (SATA) are standardized.
  There is an eSATA connector, used for external drive connections.
  http://en.Wikipedia.org/wiki/Serial_ATA#Data_connector

  The Formosa Pegatron motherboard has 6 drive x SATA connectors.
  Look carefully AT the serigraphy on the motherboard (torch lighting) markings.

  Two connectors are marked SATA 0-1, these are compliant with SATA III 6 Gb/s.
  Normally used for priming or mirror drive high performance.

  Four connectors are marked SATA 2-5, they are compliant, SATA II 3 Gb/s.