Install Epson v300 scanner Vista Home premium sp2?

Similar Questions

• I am trying to install KB2564958 on a Vista Home Premium, SP2, but it fails

  I am trying to install KB2564958 on a Vista Home Premium SP2.  This update fails and when it is installed as well as other updates, they ALL fail.

  What is an update that I should get, or can I just ignore it, if it's a need, how to install?
  
  The computer is 64-bit and 4 GB of RAM, AMD Quad-Core processor running
  Bobbie2836

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest you to follow the links and check out them.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest to perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Why not the Acer Empowering Technology for the launch of Windows Vista Home Premium SP2?

  Hello!

  I have Windows Vista Home Premium SP2 in an Acer Aspire 5920 G I installed Acer Empowering Technology, but the program does not start and a message that a problem caused the program to close and Windows will advise you if a solution is found.

  Help please.

  Thank you!

  Hello

  As software Acer Acer Empowring Technology, you will need to contact Acer directly on this problem with their software:

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• Error 800b0100 KB2564958 Vista Home Premium SP2 32-bit.

  I am experiencing 800b0100 error when trying to install KB2564958 on Vista Home Premium SP2 32-bit.  I ran the system update tool and tried to download and manually install the KB2564958 without success.  Any ideas?

  A repair installation isn't a big problem if you have the right drive. A new clean install is a much larger task.

  Notwithstanding, there is no certainty that it will solve the problem but it is very unlikely to harmful effects on the system.

  The missing file is a strange situation. It is formally identified in the Article, but on a Vista computer that I have here, there is no sign of the file. The difference with your computer, is that my updates normally and your not.

  These links can help you find a solution:
  http://support.Microsoft.com/GP/wupd/en-GB

  https://support.Microsoft.com/OAS/default.aspx?&Gprid=6527&&St=1&wfxredirect=1&SD=GN

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• Can I use Vista Ulitmate drive to install a copy of Vista home Premium if I have my key Premium?

  Can I use my Vista Ulitmate drive to install a copy of Vista home Premium if I have my Premium key on my old laptop that needs to be reformatted and I can't find my Premium drive?
  Thank you

  You can if it's a Genuine Microsoft Vista DVD, but is NOT if it's a Dell, HP, etc the recovery disc.

  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Network drivers no longer will charge after upgrade to Vista Home Premium sp2.

  On a laptop Sony PCG - 7113 L VGN-NR220E, that is running Windows Vista Home Premium sp1, I tried to upgrade to sp2 who said he could not make the transfer and restarted, tried once more and then restored sp1.  All came back as the same with the exception of all the network drivers cannot be loaded.  Here is a list of drivers who have failed.

  • ISATAP. Westell.com
  • Map Microsoft ISATAP #3
  • Teredo Tunneling Pseudo-Interface
  • Marvell Yukon 88E8039 PCI-E Fast Ethernet
  • Controller of
  • LAN0Express AS IEEE 802.11 g PCI-E fit

  I went back to the site from Sony and all the latest drivers downloaded from the site and tried to install.  Only some allowed me to do even while administering it, but even those that didn't load on reboot even if it finds the drivers.

  I tried to uninstall the drivers in Device Manager, but nothing helped.  None of the drivers loaded when you restart.  I tried disabling verification of driver and reinstall the network drivers that I downloaded from Sony site without success.  Then I tried to download a driver directly from Marvell Yukon site for its pilot, but which also failed.

  Given that this approach did not work, I tried to get sp2 to load looking for why it was not installing.  I found a patch that was supposed to help the installation in certain situations that I loaded and sp2 installation I tried again a full download on another computer, which has not the same way.  I then tried to load sp1 over himself, but he refused, saying he was already loaded.

  I tried to start off backups old session, but without success.  I wouldn't have to reinstall the operating system everywhere, especially since I don't even know if the owner of the computer has a copy of the operating system.

  It seems to be that something related to all the fuction of network that worked before you attempt the installation of sp2 and was obvious immediately after.  Is there something I can do to restore the network features without a complete reinstallation of the operating system?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Update 938371 on Vista Home Premium because of the error 800b0100.

  Using Windows Update and stand-alone update, I can't install the Update 938371 (which I believe is a sine qua non for SP1) on my Vista Home Premium laptop.

  When I try to do, I get an error 800b0100. I tried the system preparation tool, I even tried the fix XP (for re-registration of dll), but doesn't seem to work.

  My laptop is an Asus G2 with 3 GB of RAM and an Intel Core 2 Duo T9300 processor (both at 2.5 GHz), if this can help.

  Thanks in advance for your advice.

  Hi AVARiCE91,

  Welcome to the Microsoft Answers community.

  This is a reprint of this update. The republished version includes performance improvements and additional reliability that apply to the Windows Vista-based systems and Windows Vista Service Pack 1-based.
  For more information visit http://support.microsoft.com/kb/938371
   
  Try these one by one and check below:

  Method 1: Reset windows update components.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Method 2:
  
  I suggest you to temporary disable firewall and security programs. Then try to install the update in clean boot mode.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to switch to clean boot on a computer.

  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, now try to install the update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  For more information visit:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• need an iso file to install windows for windows vista Home premium 32-bit

  I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Windows update error ox80070020, cannot install power shell update vista Home premium

  Windows vista Home premium, windows update to PowerShell will not be installed via updater. I use microsoft security databases.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try the following Microsoft article and check if it helps.

  Method 1:

  Run the fixit in the following Microsoft Fixit article and check if it works.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Try the steps in the Microsoft article and check following.

  You receive the error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates: http://support.microsoft.com/kb/883825

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  Hope the information is useful.

• Recovery without disks manually off during Windows Update (well after the finished download) - Vista Home Premium SP2

  Hello

  I have an Acer with Vista SP2. It has no boot and auto repair after that I stupidly shut the computer manually during a Windows Update.

  I fell asleep and woke up two hours after the start of the update of Windows. Then without thinking, I did a manual stop without recognizing the update restart message. Now Windows does not start, and the auto repair / recovery options have failed three times. Initially he gave me a (?) CMOS settings have changed the error so I went into Setup (with the delete key) and note the date / time has been reset to the date of manufacture of the computer, do not change that. I have however system virus detection function then it off after that repair failed the first time.

  I bought a second hand computer and I have no original discs and I can't find a manually created recovery disc I thought I made some time ago. The label of Windows with Windows Vista Home Premium product key is on the computer. I have access to a Windows 7 CD since another cmputer if this can help me.

  I sent thisquestion from another computer.

  Your help would be much appreciated.

  Hello

  an AV does not stop all

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed