install graphics card G5070

Similar Questions

• How to install graphics cards on HP Z620 and power cable

  Hello everyone I buy a brand new Hp Z620 without graphics cards. I have install graphics cards already, but I couldn't find the power supply. I have install the OEM HP Quadro SLI 5000 but I can't seem to find the power cable. Can someone tell me where is the power supply for the graphics cards. Thanks AQ

  Hello

  You can get assistance on the HP Enterprise Business Forum.

• can I install graphics card in my computer hp pavilion dm4 laptop... If yes then which 1...

  I want to install graphic card in my laptop please tell me if I can or not... and also how to use wifi miniadpter port. It is here, in my pc, which is its use please inform me

  Hello

  DM4 models do not have the ability to add additional graphics card and you are not able to replace the current GPU because it is soldered to the motherboard.

• Cannot install graphics card GeForce 210

  original title: problem install graphic card GeForce 210 in windows vista home pre. display 32 bits disabled said as instructions device driver but cannot assign pci slot in the bios also in the instructions

  no response but contacted customer service & come to find out the card was faulty thnx anywho!

  Hello diggerjim,

  1. When you install the graphics card, is detected in the BIOS?

  I suggest that you check to see if the graphics card is detected in the BIOS. However, you just contact the manufacturer of the graphics card to have a control over it.

  Since it is a hardware related issue, your best option would be to contact the manufacturer or check with the place where you bought the graphics card.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP compaq dc 7900 SFF: no sound after install graphics card

  I have hp compaq dc 7900 Mini PC... After you install the graphics card ati hd 5460 there is no sound in my pc... instead of on-board "audio device high definition AMD there." I use some youtube vedios to solve this problem and there is a solution by allow edge audio in the bios Setup... then I try to enter the installation using F10 but it ask password... then I hit "enter" 3 times and I could not able to enter the bios Setup... in audio device shipped here turn off but I can not change it... I could not change any setting in the Configuration of the bios... so please help me solve this problem.

  

  

  You are the very welcome.

  There are two ways you can solve the problem.

  1. remove the rider of green password on the motherboard, following the instructions in the manual that I posted.

  And as I wrote yesterday, if remove the jumper and turn on the PC does not erase the password, then the only other thing you can do is to replace the motherboard by one with no BIOS password set.

  2. install a video card that has no hdmi on the port.  I put a Radeon HD 2400 in my dc7900 SFF.

  This card has only one S-video and DVI port, so the onboard sound is not disabled when you install a card like this.

  Then you can press the yellow button to reset CMOS to restore the integrated audio system.

• HP Compaq dc 7800p CMT: install graphics card GeForce G100 on HP computer

  Gentlemen!

  I have an unusual question on installing a GeForce G100 graphics card on my HP Compaq dc7800p CMT. I know it's technically a work computer, but I think that the question applies to any HP computer.

  I got the video card for almost anything and it seems from my investigation that it will work on this computer. The problem is that there apparently is not a standard Nvidia GeForce configuration, but were made for Acer desktop computers. The card has VGA, DVI and HDMI ports. There are standard Nvidia configurations that include the VGA and DVI ports, but not the HDMI - at least that I've seen.

  For the most part, my question is which driver I should try to use it with her. If I download driver Nvidia directly, generic for this card, what happens with the HDMI port? It must, of course, a special driver that Acer with this card allows users who must support the HDMI port, but what will happen if I installed Acer driver for this card on a HP computer? I could live without the HDMI port, but I would be rather functional.

  It is very difficult to get a useful answer forums GeForce on legacy hardware, so much worse if it's an outside-the-box situation like this. Maybe nobody can offer anything other than a guess, but I'll take what I can get. I tell myself that an assumption of a tech-saavy person more than me is better than my own guess!

  Complete information on the map in question follow: GeForce G100 512 MB DDR2 HDMI/D-V FN: 288-50N44-A01AC

  Thank you for interest!

  Grant

  Hi, grant:

  Normally, the Nvidia driver install everything, including audio/video HDMI.

  On the dc7800, install this card will disable the integrated audio system as well as the video integrated, so after installing the card and the drivers, reboot the PC, go into the BIOS, select the Advanced menu and then select the menu options of the device.

  There will be an embedded audio setting and it will be on people with disabilities.  Set to enabled, save it and then again when you exit the BIOS.

  Reboot, then you should have the on-board audio back.

  Before installing your video card, go to Device Manager, click to expand the category of display cards, right-click on the Intel graphics card, select uninstall, check the box uninstall driver too when it exists.  I forgot if it is or is not under Vista.  Windows 7 has this additional option.

  Instead of restart as you are prompted, stop and unplug the PC and install your video card.

• HP envy 17 G0U21AV: can I install graphics card or eGPU

  I got my laptop about a year ago and made the terrible decision not to get the graphics card, I wonder if I can upgrade or maybe anything can I install a graphics card or do I have other options.  I hope you can help because I'm not in the budget for a new cell phone anytime soon.

  jet224 wrote:
  My friend has a Lenovo which was only $800 and tracks of gta at good pace, that I need to look for in the charts

  It will depend on if the resolution as well. Trade out of 15 "and settings means there so he could do it, but if you want all the pleasure of the eyes and then no it will not be there.

• p6627c (ABA): install graphics card

  Can I upgrade my graphical desktop HP pavilion AMD Radeon R7240 graphics card? I followed the instructions in the manual, but it is not seen to register in the Device Manager when it is installed. Can anyone help?

  Hello @SteveCapouch,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you try to update the graphics card for your desktop computer, and I'd love to help you in this case!

  According to the specifications of the product for your desktop, your system settings can support for a new maximum grpahics card are the following:

  • PCI Express x 16 (generation 1) expansion slot
  • 250w PSU

  The card AMD Radeon R7 240 you have installed is a PCI Express x 17 (generation 3.0), which is not compatible with the PCI on the motherboard bus.

  I hope this helps!

  Best regards

• install graphics card

  I have a hp paviilion p6203 with intregated graphics, want to install a pci graphics card, can someone tell me please how to do this... .do I have to disable the edge etc. ... If so how...

  Thanks for any help

  Hello

  Buy yourself a PCIe 16 - x video card. If you do not want to upgrade the power supply (as it is the only 300w) to ensure that your new video card is only single wide slot.  Install the card into the PCIe x 16 slot more close to the processor. Do not deselect the embedded video. In most cases, the BIOS will automatically select. Plug the connector of the monitor, and turn on your PC. If it recognizes the card... great. Then simply load the driver appropriate for your operating system installed. If the card is not recognized you have to reconnect the connector from the monitor into the onboard video output and go into the BIOS at startup with the F10 key. Search video selection in the BIOS and change to the ANKLE. (PCI Express Graphics)

  Let mekonw how it works.

  Kind regards

  ERICO

• no monitor after installing graphics card

  I am running XP and installed a new AGP graphics card.  I disabled the old PCI graphics card before you stop.  Now, I have no monitor. I can't download the driver. What should I do?

  I am running XP and installed a new AGP graphics card.   I disabled the old PCI graphics card before you stop.  Now, I have no monitor. I can't download the driver. What should I do?

  You should be able to get a view if you boot into Safe Mode or Safe Mode with network.

  You can download the driver on another computer and burn it to a CD or transfer it on your local network (if you have configured to share files) so that you can install it.  IIRC, USB does not work in Mode safe, so you can't possibly put the driver on a USB key.

  If you start using safe mode with networking, you can go to the Internet (carefully, because you're a / v and firewall will not be enabled) and download the driver.  Or you could remove the AGP card, start safe mode, re-enable the old PCI card and then restart in Normal mode and download the driver.

• Help installing graphics card

  Hi, I recently bought a new graphics card for my computer trying to install it, with the new card, that I can't in front of the screen of the bios at startup. I don't know much about computers, but am guessing it's a compatibility issue with some of my hardware. My pc is an HPE h9-1010 has and the new graphics card is overclocked Geforce GTX 660 2 GB Gigabyte-GV-N660OC-2GD. Any help would be appreciated.

  Whereas the new map replaces an NVIDIA card and the power supply meets specifications and there are two available PCIe power connectors, it would seem that the video card may be defective.

  Your PC and its characteristics do not meet the own GigaByte published system requirements for the video card. Contact the vendor for a replacement under warranty.

• freezes on Hp IPISB-CH2 with the new installed graphics card BIOS

  I have the HP Pavilion Elite HPE H8 1010cs. Motherboard is HP IPISB-CH2. I bought the new graphics card GAINWARD Nvidia GeForce GTX 970 4 GB with 600W power supply Corsair CX600M. First of all, I tried my new power supply with my old nvidia 550Ti GPU. It worked perfectly. But when I replaced the old card with new GTX 970, bios freezes on the first power on the window. Escape does not work. I'll be back new graphics card, or is there still some hope in this?

  

  Hello @Tomas83,

  I understand that you are having problems getting your work HP Pavilion HPE h8-1010cs desktop PC with your Gainward GeForce® GTX 970 Phantom 4 GB graphics card. I think that the reason why you're facing this problem is the breaking backward compatibility on the PCIe slots was broken to the around the label Gen 2.1 and you try to put a Gen 3.0 card in a slot of Gen 1.0. In substance, it makes your computer incompatible with the graphics card, that you have chosen to use.  I provide you with an article on the overclock.net site called the final answer to the controversial compatibility of PCIe x 16 version., where the author explains what I've described and going in how he made the decision. I would advise that you read the article, if you have any questions about the issue you address.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Compaq nc8230 - cannot install graphics card

  My laptop was blue-screening, so Wednesday I formatted and reinstalled Windows. I don't have the original HP restore CD, so I downloaded the drivers from the HP support site. I have downloaded and run Intel Chipset Installation Utility (sp29371) and driver ATI video and control panel (sp33162). The chipset drivers seems to have executed correctly, but Windows has not detected new hardware. The video driver installation was not completed. He ended with a message stating, 'try to configure your graphics card with the standard VGA driver before executing the Installer'. Help, please!

  Model: HP Compaq nc8230

  Material: 1.73 GHz Intel Centrino M, 1 GB of RAM, 37.2 GB HARD drive

  OS: Windows XP Pro SP3

  Thanks for any help.

  Ross

  Hello

  Try this driver:

  Video driver ATI and Catalyst Control Center here

• New installed graphics cards makes beep sound and no response from the monitor

  Hello.

  I have a hp pro 3300 micro Tower. I installed a new card from nvidia quadrophonic 420 graphics.

  When I start the pc I hear 4 beeps and then nothing. The screen is blank

  eager to help

  D

  Hello:

  4 beeps is a problem with the power supply.

• No sound after installing graphics card

  I just installed a sapphire ATI 3850 1gig video card and now I have no sound. I use Vista media and my photo is beautiful and I have a volume control and it read hemi healthy, but even to most top level, it makes no sound. What can I do

  nofrill13,

  Video card you have a HDMI output? If yes then your computer has probably set your audio device as the default the HDMI output. To make sure which audio device is the default, please follow the following steps.

  1. Click Start

     The collapse of this image enlarge this image

     

     and then click Control Panel.

  2. Click hardware and sound.
  3. Under sound, click on manage audio devices.
  4. Click on the playback device you want to output sound.
  5. Click on set as default and then click OK.

      

      Another thing to check is your device manager to see what is listed under "audio, video and game controllers". Please follow the steps bellow to Device Manager.

  1. Click Start

     The collapse of this image enlarge this image

     

  2. In the search window type "devmgmt.msc".
  3. You should now see the Device Manager window
  4. Expand it please (click the sign '+') ' audio, video and game controllers ".

  Please answer following questions.

  Question No. 1: Is your audio device embedded it listed?
  
  Question 2: if your onboard audio device is not listed then what is listed?
  
  Question 3: if your audio device is onboard listed is something else who is registered?

  Please make sure that you have adequate resources to re - install the drivers if necessary.

  If your onboard audio device is not listed, you can try to uninstall or disable the HDMI driver (as appropriate) by right clicking and select "Uninstall" or "disable". This could help to redo your default audio peripheral edge.

  Please let us know what your progress and any steps you've tried troubleshooting.
  If you have more questions, please let us know.

  Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.