Install new OS clean, "cannot find boostrap.lua".

Similar Questions

• An installation support file could not be installed. The system cannot find the specified file

  I'm trying to get rid of some programs on my Windows xp, but the following alert continue to flock to the top: an installation support file could not be installed. The system cannot find the specified file

  Hello

  • What programs you try to uninstall?

  You can check this link:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• The engine InstallShield (iKernel.exe) could not be installed. The system cannot find the specified file.

  I am running XP Pro and I am trying to install a program, and I get this error code: motor InstallShield (iKernel.exe) could not be installed.  The system cannot find the specified file.  How can I solve this problem?  Thank you.

  Hello

  · What program are you trying to install?

  You can check the link and try the steps listed: error Ikernel.exe when you install programs by using InstallShield: http://support.microsoft.com/kb/810608

• need to install auupldate.exe but cannot find a solution on windows xp

  also need .net framework 2.0 or a later version to install the software and cannot do

  1. How can I reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  2 framework

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Use the foregoing as guides to solve the problem.

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  Order of relocation:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP650 NEW GRAPHICS CARD, CANNOT FIND DRIVER

  Hello

  UNCLE HP650 HAD WHITE SCREEN AND HE TOOK IT TO A STORE TO GET FIXED. TOLD HER THAT IT WAS THE GRAPHICS CARD, AND THAT THEY HAD REPLACED. THEY ALSO SAID THAT HE NEEDED NEW HARD DRIVE.

  HE GAVE ME HP650 AND I REPLACED HARD DRIVE WITH ONE OF HIS OTHER LAPTOP ACER THAT WAS NOT WORKING.

  HIS ACER HAD WINDOWS 7 TOP SO IT IS WHAT CAME AT THE START. I MANAGED TO FIND A FEW PILOTS WHO HAD DISAPPEARED, EXCEPT FOR ONE.

  I CAN'T GET A DRIVER FOR GRAPHICS CARD. I TRIED THE DIVERS WE HP FOR HP 650 AND HE SAID "COMPUTER DOES NOT HAVE THE MINIMUM REQUIREMENTS FOR INSTALLING THE SOFTWARE. I ALSO HAD THE DEVICE MANAGER GRAPHICS CARDS HARDWARE ID AND USED THAT TO FIND ANOTHER DRIVER, AND GOT THE SAME MESSAGE WITH THAT.

  CAN ANYONE HELP

  This is probably the problem. There is a driver installed in the previous conflict. You should really do a clean install on HP laptop.

• Reinstall clean cannot find drivers

  Clean after reformat and reinstall, Dell 3000 can not find the drivers for ethernet, audio or a monitor, either on CD install, search on the web or Dell download website, which apparently does not (based on the many comments).  I thought that the base drivers would be available on a relocation - where have I wrong?

  Original installation CD Dell Dimension 3000 for Win XP, SP2

  JS - thank you

  When I went to Dell at the beginning they said that my service number was invalid.   Panic.  After all the tenth attempt, they decided it was OK after all.

  THX once again

  D

• Find him that new hardware wizard cannot find printer drivers

  turn my PC on Windows XP Home Edition. I am trying to install a new printer Brother HL-5340 D. The installation disc runs correctly and copy the files on my PC. To start the "New hardware found" Wizard it can not find the driver even when I on original cd and desktop. I tried the auto option and the option "targeted" without success.

  with the target, you give full path directly to the driver, or just the cd?

  Also try to get the driver directly from brother: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/003700/dlf003734.html?reg=us&c=us&lang=en&prod=hl5340d_all&type2=1&os=7&flang=4&dlid=dlf003734 here is the link for xp.

• I created a new library of more new playlists but cannot find the Library.xml file

  Hello

  I'm going to re - build my iTunes files from scratch, a kind of decennial event 'spring clean '. I have created a new library by using the command, click on application startup, and then began to rebuild new reading lists in the application. I can see the folder newly created the library that contains the new "iTunes Library.itl" file BUT I don't see that the iTunes Music Library.xml file. " There certainly must be one to save the data of the playlist, and probably "Get Info" should reflect today date' today... I don't see older versions.

  Although everything seems to work perfectly I don't want to have to re - visit the construction of Playlists from scratch for the next ten years! Can anyone suggest what happened to the .xml file?

  Thanks and greetings

  You can create an .xml on iTunes/file/library/Export library file and gives you the opportunity to put the Library.xml file in your iTunes Media folder - or anywhere you like.

  If you need to rebuild your playlists, you can go to iTunes, file, library, import playlist and select the .xml file.

  Normally, you do not see the .xml file in your iTunes folder.

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.

• connected my old hard drive to my new laptop but cannot find places.sqlite anywhere...

  When I find the default value of the record, there is no places.sqlite but only a folder called chrome inside...

  You will need to examine the data in the Application, or APPDATA (depending on the version of Windows you had on your old hard drive) for the profile folder (this is a hidden folder). https://support.Mozilla.org/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• I want to open links in a new window but cannot find where to put the setting. Having disabled the "open new windows in a new tab instead" box in the Options dialog box.

  When I click a link on a Web page or other software, I want to open in a window, completely new.

  You can hold the SHIFT key and click the left button of the mouse a link to open this link in a new window.

  The setting in tools > Options > tabs is only for links that specify a window target and you can hijack such a link in a new tab instead.

• Downloaded Photoshop elements 13 since more than a year.  Just now trying to install and configure.  Cannot find the serial number and/or redemption code.

  Can someone help me find my serial number?

  See the link below:

  https://helpx.Adobe.com/x-productkb/global/find-your-serial-number.html

  If you have not registered the product under your Adobe account, you must contact Adobe technical support and may need to provide proof of purchase.