SAT P100 wired wrong power

My friend plugged a power supply 18v to my laptop which, for this model should be 15v. Now when I plug the proper food in, not even the power led lights up. Is there a fuse to replace or reset that needs to be run to make it work again?

Please help I need my laptop for work!

Thank you
.

As far as I know that nothing can be reset. Probably there is a problem of electronic power and I fear only Toshiba authorised service partner can help you.
Let them control the electronic power supply.

You can use your laptop with battery only?

Tags: Toshiba

Similar Questions

  • Satellite P100-347 - AC power does not

    I thought I'd let everyone know a solution to a problem.

    I used the laptop for long hours and I found it out the next immediately at startup.
    The power supply was not working and prevented from leaving.

    What I did for the solution...

    1. no AC power on, remove the battery.
    2. wait 30 minutes
    3. connect the power cable. (AC power indicator should now light)
    4. start the PC. (it starts!)
    5. turn off the PC.
    6. reconnect the battery.
    7 reconnect the power cable. (AC power indicator should now light)
    8. wait battery light to show his load again. (light blue instead of orange)
    8. start the PC. (it should work now!)

    I really hope that someone benefits from this because I felt with the laptop went I had lost a member.
    I am now happy. I still have that gives more time. But I'm a happy Bunny at OM.

    Price for the repair looked nasty and we talk on the motherboards web gone. Yuukie.

    Looks full of supply circuits switches do not properly with battery and AC. As he would not spend
    Using the battery to use AC the AC was plugged after starting on batteries.

    Carlin

    Yes, that sounds like a motherboard problem. I would like to send the laptop to an ASP for a quote. It could be something as simple as a bad connection.

  • Satellite A110-162 died due to use of wrong power adapter

    Hello everyone, this is my first post, so please bear with me.

    As the title says, I went through a repair on this A110-162. The owner, my friend connected the wrong diet and killed the machine.
    I disassembled and PF1 opened.

    I found a supplier for that matter but have been unable to determine the rating. If a kind soul has a list of the parts for this model,

    I would appreciate if you could look it up on the correct side for me.

    Kind regards... Chookey

    I think that in this case only the partner of service authorized in your country would be able to help you.
    If it is possible then a technician ASP could order such a part of the Toshiba directly.

    Then contact the guy and ask for help!

    Goodbye & good luck

  • Satellite M60: How to uninstall Toshiba Power Saver

    Anyone know how to uninstall the Toshiba Power Saver driver manually (so that should not be able to perform a clean installation of Windows)? There is no automated uninstall for the GST driver (should not be confused with the Toshiba Power Saver that can be uninstalled without problem).
    Note: the recovery CD is not an option here, because the pilot of the GST is included.

    I want to do this to check if this is the thing that messes the keyboard or not (see posts on M60 keyboard problem). I just wanted to check on a new Sat P100 which has a similar keyboard, but guess what... the GST is not enclosed with it.

    You guessed it, the keyboard problem has not resolved the Toshiba service representative.

    Hi Sammo

    Unfortunately I have no solution, how to remove the GST driver but it will be interesting to know how it works after installing the full version of Microsoft WXP. If you do a few tests please let us know.

  • For HDD power cable

    Just bought a HP Envy 700-030qe CTO desktop PC. Because HP does not offer a hybrid drive SS I decided to install one myself and move the disc that came with the computer to the 2nd position in the car. Successfully, I have installed the new drive, restored the system and reformat the original drive using an external adapter to Apricorn. To complete the installation of the 2nd disk, you need the integral of separate SATA connector in the harness (no problem) and a power cable. The latter was not provided. Called HP support and they told me dryly that HP will not sell me the part since I did not buy a second drive hard when I bought the computer.

    Someone finds a way around that stupid customer and very unfriendly HP political or otherwise know of a 3rd party where I can buy the cable?

    Semibum wrote... "To complete the installation of the 2nd disk, you must the integral of SATA connector in the harness (no problem) and a power supply cable separate."

    I think you have that backwards... The power connector is the part that is "part of the beam" and you need to buy a separate SATA cable to connect the drive to the motherboard. If you follow the 'wiring' to its origin, it should go to food. The power connector/cable and SATA data connector/cable should look like;

    Example of SATA connections

    1 - power cable

    2 - SATA data cable

  • Satellite P100: Battery is only lasting 10 days after a full charge

    My P100 battery is only lasting 10 days after full charge and then not use it. Is this normal?

    Mike

    Hello

    Yes, it's nothing unusual. My Sat A30 loses the power of the battery for 3 days being off.

    Please consult this document:
    Battery drains 15-20% when it is turned off during the night
    http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

    According to this document, that the battery could lose about 15-20% of the power during the night.

    Greetings

  • Satellite P100-160: Question about upgrade HARD drive

    Hello

    I would replace the internal hard drive to a larger size, but I don't know who is compatible.
    Here is a link to dabs where they have 5 hard drives, but not sure if they will work.

    Would be nice to get some tips on this thanks.
    I have a Satellite P100-160 that currently has a 120 GB hard drive, it is not enough!

    http://www.dabs.com/ProductList.aspx?&NavigationKey=11154&NavigationKe y = 50540 & key = 40970000 & CategorySelectedId = 11154 & PageMode = 1

    Hello

    I downloaded the user manual for this laptop from the Toshiba page and it says that you can use the 160 GB HARD drive.
    I think that he n t be a problem to use a bigger like 200 HDD or 250 GB.

    Sat P100 supports a SATA HDD controller and you should therefore use the HARD drive 2.5 SATA.

    Concerning

  • Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

    When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
    I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

    I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

    I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

    Hello

    We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
    So in my opinion the next drivers for the next series should follow in the near future

    I don t see it differently as to wait

    Of course, you can test different drivers from different series as Sat P100.
    Many laptop models use the same devices and therefore different unique pilots could be compatible

  • Spectrum for computer laptop 13-v051na: connect more capacity power adapter Message

    After starting, I get the following message. "For maximum performance, connect a higher capacity Power Adapter.

    The power adapter I use is provided in the box with the notebook. So I'm at a loss on what to do and do not understand the impact with an adapter in addition low capacity.

    AFAIK, the ability for the laptop power adapters are not in the HP store.

    Details of the laptop;

    Spectrum of HP for computer laptop 13-v051na, part number; F6P95EA #ABU

    (Note that this laptop is a variant of PCWorld/Dixons cell phone spectrum HP Ref. 13 - v001na F4W33EA #ABU)

    Details of the charger supplied with the notebook; (markings on the charger)

    Power supply for charger USB - C;

    Model; TPN-CA02

    HP part No.; 848067 002

    HP Spare; 848293 850

    Entry; AC 100-240V 1. 4A

    Exit;

    5V 2A DC

    12V 3A

    15V 3A

    45W max

    Additional information about the message;

    Message; "For maximum performance, connect a higher capacity Power Adapter.

    In the taskbar, the icon indicates that the message is from HP system information.

    Application properties (found via the Task Manager) HP system information are;

    • File; USBCMSG.exe
    • Location; C:\Program Files (x 86) \HP\HP event system
    • Version of the file; 1.4.14.0
    • Version of the product; 1.4.14.0
    • Date of change; 20/06/2016
    • Original file name; SysInfo.exe

    Good news is that there is a difficulty.

    I was given further guidance to Support cat HP, including a link to the page software and downloads.  This shows a new BIOS Softpaq, which has not been suggested by HP Support Assistant. Details of the update of the BIOS are;

    HP Notebook System BIOS Update (Intel processors) F.26 Rev.A 15.4 MB 24 August 2016

    File name: sp77130.exe
    Communicate details
    Exit the: 12 August 2016
    Version F.26 Rev.A

    I have applied this update of the BIOS and the wrong power adapter warning message no longer appears.

    Problem solved. Thank you HP.

  • Re: Satellite Pro L500 - eSATA connect to the HARD 3 "5 Seagate SATA internal drive

    Hi all
    I have extracted a desk ST3500830AS SATA hard drive.
    This HARD drive has both a SATA and a single POWER connectors.
    SATA connector has 7 POWER connector has 15 pins.
    What cable to connect the HARD drive on my Satellite Pro L500 eSATA port.

    [URL] http://www.eprice.it/cavi-vari-assemblaggio-MANHATTAN/d-4122748?metb=ATG_pcat [URL]

    Thank you
    Giovanni

    Use google and search for 3.5 "SATA to ESATA External Hard drive Caddy

    You will get many hits

  • HP Envy Phoenix 860se-100: required power for DVD cable drive on Envy Phoenix 860

    I recently bought a Phoenix of envy and the first task was to cut the power of 500w and replace it with a bigger 80 more platinum supply (EVGA Supernova 750w P2). I have a 980ti video card and added a few SSDs that require the increased power.

    While it is installed and works well, the Endowment had a [what I have now learned to know as] sata mini connector for power to the DVD player. Naturally my new power supply do not have that.

    Best I can tell is to get something like this: http://www.amazon.com/gp/product/B009JXKQ9O?keywords=mini%20sata%20adapter & qid = 1458574748 & ref_ = sr_1 _... (although I have will probably want it a little longer)

    This should allow me to connect the sata and power from the motherboard. So my question is that correct?

    Or something like that might work also, http://www.amazon.com/Syba-Cable-Molex-Adapter-CL-CAB40042/dp/B005BCNAWM/ref=sr_1_1?ie=UTF8 & qid = 1458...

    I guess that this connects to my diet?

    I bought a cable mini sata (6 pins) on ebay for a few dollars. Solved the problem. Subsequently my brother mentioned that the electricity company probably would send me a free.

    500 watts was barely sufficient to manage the graphics card processor and 980ti. I don't want a bill of $600 to replace my card because the power supply has failed. Not to mention that it is more than 10% more efficient.

    Thanks for the reply.

  • I need common Module and Power Saver for Satellite L100-117

    My sister has an older model L100 and I can't find the drivers on the official website of Toshiba.
    The energy saver is installed, but it reports an error message (+ cannot run, because you do not have access rigts... +.)

    Hello

    I didn't find the common modules for Sat L100, but the power of Eve for Windows XP is available on the European driver Toshiba page.
    It seems to be a v7.03.07Q version.

    PS: Are you sure have the administrator right to launch the energy saver?
    The error message indicates that you have no permission to use the energy saver. I think you should check your user account rights.

  • Satellite P100-160 has no led speaker

    Hello

    someone can help me.
    I got a Satellite P100-160 but not seeing under speaker.
    Some might say if it must include the

    Hello

    Not all portable satellite P100 supports speaker lights!
    It depends on the laptop model.
    Sat P100 with Intel graphics don t logs support the speaker light and make the units with NVIDIA graphics card.

  • installation of Sony AD-5260 s - 0b 24 x internal DVD - RW SATA black bare

    I just got a new one Sony AD-5260 s – b 0, 24 x internal DVD - RW SATA black bare and power cable and serial ATA, but where to plug the serial ATA

    Well, that depends.  Even your computer does support SATA?  What is the brand and model of the computer?

    http://www.ehow.com/how_5076452_connect-SATA-DVD-drive.html

  • Windows 7 blue screen ID41 core power

    Hello I have a big problem with the computer that I built my own little running windows 7 Professional 64. I continue to encounter blue screens when I try to play the game or navigation. It happens that sometimes, and I just can't understand what's happened.

    can anyone try to help me please?

    Here is the error message:

    I articulerai the file DMP who I know can help a bit

    https://www.dropbox.com/s/kuk5ow8sjwioy64/dmp.rar?DL=0

    -
    -
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      2793
     
     
      System
      Renato-PC
     
     

    -
      292
      0 x 0
      0xfffffa8005b9c028
      0xB2000000
      0 x 10019
      fake
      0
     

     

    Thank you very much, Mr.

    Here go us with the first information:

    Here is the link with the driver overview report:

    https://onedrive.live.com/redir?RESID=A1BC5F9927C91CBA! 328 & authkey =! AFxGelxRfgJhAs8 & ithint = the file % 2ctxt

    I built the computer of my own with this different parts:

    1. Motherboar: MSI Z170A Krait Gaming
    2. Graphics card: ASUS STRIX - Nvidia GeForce GTX 970, OC, (3.5 + 0.5 GB) 4 GB memory GDDR5 256 bit
    3. Processor: Intel Processore Core i5 - 6600K (Skylake) Quad-Core
    4. RAM: HyperX FURY HX426C15FBK4/16, 16GB, Kit (4x4Go), 2666 MHz DDR4
    5. SSD: Kingston 240GB SSDNowV300 - 2.5 "SATA 3.0
    6. power supply;  Corsair CX750M, CP-9020061-EU

    i - m sorry that the system information report is in Italian at the moment, because I can not change the language of my system, I'll try to change it tomorrow:

    https://onedrive.live.com/redir?RESID=A1BC5F9927C91CBA! 329 & authkey =! AHavpEE__yDSE7w & ithint = the file % 2ctxt

Maybe you are looking for

  • First HP Calculator: basic use

    It is my first graphic calculaot, so forgive me ignorance please. When I go into the menu of CASES and I immediately want to simplify an equation or expression, how can I get the simplify() upward on the screen? (The only way I can make it work's fir

  • HP officejet 7310 all-in-in-one: print

    I did a restore to factory State on my pc today.  The printer prints double-sided automatically prior to the restoration.  I reinstalled the printer from the hp Web site. But failed to get the two-sided automatic printing longer.  I uninstalled and r

  • Windows cannot communicate with primary dns server

    Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with

  • MouseOver mouseout/mouseouthandler()?

    So I used the code snippets to try to put a bearing on a clip.frequency of var = 3;stage.enableMouseOver (frequency);This. CTA_button.addEventListener ('mouseover', fl_MouseOverHandler_2);function fl_MouseOverHandler_2(){Start your custom codeThis co

  • ML370 with Smart Array 532 - equip ML350 with disks - will I lose my config / run?

    We have an ML370 with a 226874-001 CPQ Smart Array 532 and the motherboard has failed. I want to put the disks and the controller of table in a ML350, but want to know if it will lose its configuration or is it boot/run with these mobile? Please help