install nvidia 840M on Pavilion 15-n217sx

I just bought this pavilion 15-n217sx with Nvidia Geforce and 840M from nvidia Installer driver won't work, so please give me solution for this immediately.

Hello

Did you use the driver at HP or somewhere else? HP driver has been tested. HP Support Assistant it worked for you. If you have used the driver from other sources so good luck. Also, I ran a test on my loan machine, using the Nvidia installer, get the following result.

What is the error message on your machine?

Kind regards.

Tags: Notebooks

Similar Questions

  • Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

    Hi @mnshahid,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • How to install XP on HP Pavilion DV2710US... Please help me

    Hi all!

    I tried to install Windows XP on my laptop HP Pavilion DV2710US but no success.

    Please help me, how to install XP on HP Pavilion DV2710US.

    Thank you all

    HP Pavilion DV2710US

    -

    CPU AMD Turion 64 X 2 Dual-Core Mobile Technology TL - 60 2x2.0ghz
    (2 x 512 KB of cache L2, 1600 Mhz FSB)

    -

    RAM 2048 MB - up to 4096 MB

    -

    HARD drive 160 GB SATA 5400 RPM

    -

    LCD display 14.1 "WXGA high definition BrightView Widescreen Display (1280 x 800)

    -

    VGA nVIDIA GeForce 7150 M - up to 799 MB

    -

    Optics: Support of X drive with Double layer LightScribe Super Multi 8

    -
    -

    3 x USB 2.0, VGA, TV, RJ-11, RJ-45, IEEE 1394 firewire (4-pin) out
    Camera + microphone Built in

    -

    "Dimensions: 13,15" (L) x 9.33 "(W) x 1.02" (min H) 1.54 "(maximum H)"

    -

    Weight: 2.0 Kg

    -

    PIN: 6cel Li-ion

    -

    56K modem, NETWORK card

    -

    Intel 802.11abg wireless

    -

    OS Windows Vista Edition Home Premium

    Message edited by hoannh on 06/09/2009 09:16

    Dear Alex!

    It comes from overheating while using Vista. But no self closed.

    How to try to use the cooling package when installing XP.

    Currently I use XP SP2 CD to install. What version of MS for DV2710U? (SP1, SP2, SP3)

    Thank you for your support

  • Satellite P870/023 - how to install NVIDIA optimus GT 630 m under Linux?

    Hello

    Is there anyone who managed to install nvidia optimus GT 630 m in ubuntu or any other linux OS and worked? Coz, I did all the methods that are available on the net, but not of chance, discovered that Bumblebee can not activate Nvidia! is it good?

    How to change graphics card? It has an option to change the card in the BIOS?
    Need help to install on ubuntu nvidia! I'm using linux (ubuntu 12.10and kernel 3.6.0)

    I appreciate your help and thank you

    Hello

    I would like to know what are the results when starting Ubuntu 12.10.
    Switch card is probably not possible. Normally the OS and drivers cares what graphics adapter is used. It is not possible from the BIOS.

    See you soon!

    Tom

  • Satellite X 200 - 23 g - black screen after install NVidia drivers

    The problem appeared after reinstall Windows XP Professional. With installed NVidia drivers (179.28) after reboot the screen is black. System booted normally, sounds, it has played. With no installed NVidia driver picture is normal. After reading forums I understand this problem with properties of the monitor's EDID.

    Linux systems to use the UseCustomEDID property, and use received monitor EDID struct everything works fine. Windows not not a similar option. Also, it is impossible to complete the installation from a resuscitator of disc. Black screen on the final stage. To restart with the mode VGA Vista say, who is unable to complete the installation in this mode.

    Can you help me?

    Hello!

    I've never heard of this EDID you want to say, but you should use Toshiba drivers.
    Because no Toshiba driver don t have the graphics card overheating protection can overheat. The graphics card may be damaged.
    With the Toshiba drivers, you are on the safe side

    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Then try to start in safe mode, remove the old graphics driver, restart the computer and then install the drivers of Toshiba.

    Good bye

  • What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234

    What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234?  I need to run a Nikon Super Coolscan 8000 Ed currently using Windows 7.

    Thank you

    2Wander

    A PCI Express x 1 card that is compatible with the operating system installed. You can find one at NewEgg.com or another provider online. Use Google or Bing to find the one you need.

  • How to install NVIDIA video drivers in a free WIN 7 VM on the VM workstation installation

    How to install NVIDIA video drivers in free installation of WIN 7 VM on the VM workstation?  When I try to run the driver installation package I get an error there is no hardware supported, even if the video card is installed and works in the reception of WINNING 10.

    Thank you

    V/R

    NVidia drivers must be installed only when using NVidia devices.
    You do not have in your virtual hardware NVidia machine - that's why he settled on your host computer, but not inside your virtual machine.
    Inside a virtual machine, you have a Videocard VMware - so you must install VMware-drivers.
    Appropriate within a virtual machine drivers will be installed if you install the "vmware-tools".

  • Issues installing Nvidia GT 820 M graphics driver on HP Pavilion r014tx 15

    Hey Hi,

    I just bought HP Pavilion 15 laptop computer r014tx which came with trial edition 8.1 windows. I downgraded it yo windows 7 64 bit because personally, I don't like windows 8.1. But now the problem of windows 7 is I can't install the Driver of Nvidia 820 M inside.

    Help, please.

    Hello:

    First install the Intel chipset driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

    Then, install the Intel HD graphics driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23885&lang=eng&ProdId=3718

    Then, install the graphics driver nvidia and restart.

    http://www.nvidia.com/download/driverResults.aspx/77228/en-us

  • Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-n278tx


    Hello:

    In fact there is no driver for your GPU.

    The hardware ID for the graphic adapter that is specific to your model is not included in the driver pack.

    I reported this problem to HP engineering who is working on the release of a working driver.

    You can check the related link below.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-Pavilion-15-n252sq-can-not-install-Windows-over-free-DOS/TD-p/3921940

  • Desktop HP Pavilion p6310y: need standalone Serial ATA Drivers to install Windows Vista on Pavilion p6310y

    I bought your desktop Pavilion p6310y on eBay, and I really like it. I installed Windows 7 Ultimate on it without problem. For the purposes of running the software (in particular, Microsoft Virtual PC 2007), I also want to install Windows Vista Ultimate on it, on another partition.

    I was under the impression that Windows Vista Home Premium 64 - Bit was originally installed the operating system when this system was released, however, when I start the installation support Windows Vista (which I created from a downloaded ISO), it requires additional drivers (no doubt, Serial ATA drivers) before instalatio, also no hard drives appear in the drive list. Anyone know where I can get these independent Serial ATA driver files? The controller is a NVIDIA nForce Serial ATA controller. I do not have the recovery of original installation disks and don't think that it would be possible to get to this point, this system is no longer supported by HP.

    Any help would be appreciated. TIA.

    Mark W. Stroberg

    Hi, Mark:

    I compressed upwards and tied the driver for the sata raid controller, you require to the nvidia chipset, that your PC has below.

    The best way to install the driver is as follows...

    Extract (copy) the files on a USB FlashDrive without any folder.

    With the flash player and the support of Vista installation in the machine, boot from the Vista installation media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and I hope that Vista will install.

  • install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

    How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

    Hello

    The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

    The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.

  • Cannot install driver for hp pavilion dv4-2045dx cd player

    Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

    I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

    When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

    Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

    http://support.HP.com/us-en/document/c01897812

    I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

    Any help would be greatly appreciated.

    Thank you

    Hello:

    See if ongoing automated microsoft fix tool for you works.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

    Right to the title of this topic is a "click here to view the solution."

    http://support.Microsoft.com/kb/982116

  • Impossible to install NVIDIA Graphics driver (HP 15 - R033tx)

    Hello.

    I installed a new copy of Windows 7 on my new HP 15-R033tx.

    I downloaded and installed all the drivers from the HP website.

    But, when I try to install the NVIDIA driver, it says "' install intel ®drivers first" "

    Kindly help me in this problem.

    Thank you.

    Hello:

    Here's what you need to do for the graphics...

    1. install the Intel chipset installation utility first and then restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7308900 & sw_lang =

    2. install the Intel HD graphics driver and restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134230-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7308900 & sw_lang =

    3. install the Nvidia graphics driver and restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130198-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7308900 & sw_lang =

  • Pavilion 550-122nd: install an ssd in Pavilion 550-122nd

    I am installing an ssd in my computer (Pavilion 550-122nd).

    The chassis of the computer is not as I used to know, where you could fix with the screws on the side (HD) material.

    The hard drive in the 550-12 Pavilion is set on the bottom of the hard drive.

    The 2.5 "to 3.5" support for the ssd in the computer doesn't have the screw holes on the bottom of the support.

    Are special types of media for this? Or, how to install an ssd in the 550-122nd Pavilion?

    Thank you.

    Meribel

    Personally, I wouldn't worry on the screws.

    With a hard drive, these are important because they stop the car while it is in use.  But in an SSD, you have no moving parts, so there is no reason to immobilize.

    I have a tower PC running on an SSD and which is simply placed on top of a tray of disk - and works very well for months!

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • Install windows7 in HP Pavilion g6-1262er

    I buy the HP Pavilion g6-1262er with back oc
    When I try to install windows7 from usb-flech
    After choosing only the language and click on install now
    It gives me this error
    "Load the driver: A required CD/DVD drive driver is missing." If you have a driver disk, CD, DVD, or USB flash drive, please insert it now.

    Note: installation media of Windows in the CD/DVD drive, you can remove safely for this step. »

    I then get a window that says "Select the driver to install." With a window below with nothing in it. I can click on browse or analyze again, but neither seemed to help.

    What should I do
    pls help me

    I think it's
    I download windows from this http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-links/

    Windows 7 Professional x 64 (64-bit)

    English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65805/X15-65805.isocan I make a boot usb - hdd with ultraISO
    I try
    It works
    Thank you

Maybe you are looking for

  • App Store

    Since the installation of ITunes 12.5.1.21 last week, I was not able to access the App Store. Can someone suggest a cause/solution? Thank you Geoff

  • FTTP, NBN phone and analog

    I have NBN FTTP with iiNet and looking to move to an Airport Extreme. My question is, is there a way I can connect an analog phone to EI or should I get a new phone. I need a by 2-3 cordless handsets so I weigh the cost between a converter or a new d

  • WiFi iPhone 6 s problem

    I updated iOS iOS 9.3.1 and then he still has a Wi - Fi connection. Now, our House always has a Wi - Fi connection, and when we accidentally turned off Wi - Fi tonight, he began to stop. My Android still had Wi - Fi, but it maintains the infinite cir

  • A DIAdem plugin update fails

    I have problems in making updates to a plugin of DIAdem. I started with a plugin provided by OR based on our .xlxs file format. It worked, but I wanted to make a few additions. I took the existing code in the .vbs file and copied to a new file. Long

  • Slow data acquisition speed

    Hello I use a CompactDAQ to measure signals. I'm reading 10 signals: 2-channel 2-line of NI9219 and 8 channels of thermocouple (thermistor) resistance. I'm in LabVIEW 8.6. I read a sample in all channels once and then read another sample. I don't kno