Install the components of the network on vSphere host via API NSX virtualization

Similar Questions

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Need help to install the network on laptop drivers

  I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

  The network adapter driver specifically requests the Ethernet, wifi and it...

  Hello McKinley,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you need help to install the network drivers into the laptop.

  Certainly, I understand your concern and will try my best to help you.

  In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

  Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• VMware Workstation 12.1.1 Pro is unable to install the network grows on CentOS 6.8 host

  Just upgraded my 6.7 CentOS Server (where the VMware Workstation 12.1.1 worked fine) to 6.8.

  After a reboot, VMware has done, it is usual thing where she wanted to reinstall its readers. He doesn't have to install the network component. Here are my logs:

  2016-05-28T18:21:09.477-07:00| vthread-4| I125: Log for VMware Workstation pid=27658 version=12.1.1 build=build-3770994 option=Release
  2016-05-28T18:21:09.477-07:00| vthread-4| I125: The process is 64-bit.
  2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host codepage=UTF-8 encoding=UTF-8
  2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host is Linux 2.6.32-642.el6.x86_64 CentOS release 6.8 (Final)
  2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
  2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
  2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/home/sa_schewee/.vmware/config": No such file or directory.
  2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /home/sa_schewee/.vmware/config. Using default values.
  2016-05-28T18:21:09.501-07:00| vthread-4| W115: Logging to /tmp/vmware-root/vmware-27658.log
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: Obtaining info using the running kernel.
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: Created new pathsHash.
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.511-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.518-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.518-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.587-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
  2016-05-28T18:21:09.587-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Read 12201 symbol versions
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmmon module.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmnet module.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmblock module.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmci module.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vsock module.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Setting vsock to depend on vmci.
  2016-05-28T18:21:09.597-07:00| vthread-4| I125: Invoking modinfo on "vmmon".
  2016-05-28T18:21:09.600-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
  2016-05-28T18:21:09.600-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
  2016-05-28T18:21:09.601-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
  2016-05-28T18:21:09.601-07:00| vthread-4| I125: Invoking modinfo on "vmblock".
  2016-05-28T18:21:09.603-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
  2016-05-28T18:21:09.603-07:00| vthread-4| I125: Invoking modinfo on "vmci".
  2016-05-28T18:21:09.605-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
  2016-05-28T18:21:09.605-07:00| vthread-4| I125: Invoking modinfo on "vsock".
  2016-05-28T18:21:09.607-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
  2016-05-28T18:21:09.618-07:00| vthread-4| I125: to be installed: vmnet status: 0
  2016-05-28T18:21:09.624-07:00| vthread-4| I125: Obtaining info using the running kernel.
  2016-05-28T18:21:09.624-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
  2016-05-28T18:21:09.624-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.624-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.624-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.632-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.632-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.701-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
  2016-05-28T18:21:09.702-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: Read 12201 symbol versions
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: Kernel header path retrieved from FileEntry: /lib/modules/2.6.32-642.el6.x86_64/build/include
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: Update kernel header path to /lib/modules/2.6.32-642.el6.x86_64/build/include
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.711-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.719-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.719-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.720-07:00| vthread-4| I125: Found compiler at "/usr/bin/gcc"
  2016-05-28T18:21:09.724-07:00| vthread-4| I125: Got gcc version "4.4.7".
  2016-05-28T18:21:09.724-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
  2016-05-28T18:21:09.724-07:00| vthread-4| I125: Using user supplied compiler "/usr/bin/gcc".
  2016-05-28T18:21:09.727-07:00| vthread-4| I125: Got gcc version "4.4.7".
  2016-05-28T18:21:09.727-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: Trying to find a suitable PBM set for kernel "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: No matching PBM set was found for kernel "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.729-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.737-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.737-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.738-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
  2016-05-28T18:21:09.738-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.738-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.738-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.746-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.746-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.746-07:00| vthread-4| I125: Using temp dir "/tmp".
  2016-05-28T18:21:09.747-07:00| vthread-4| I125: Obtaining info using the running kernel.
  2016-05-28T18:21:09.747-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
  2016-05-28T18:21:09.747-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.747-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
  2016-05-28T18:21:09.747-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
  2016-05-28T18:21:09.755-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
  2016-05-28T18:21:09.755-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
  2016-05-28T18:21:09.825-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
  2016-05-28T18:21:09.825-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
  2016-05-28T18:21:09.834-07:00| vthread-4| I125: Read 12201 symbol versions
  2016-05-28T18:21:09.834-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
  2016-05-28T18:21:09.836-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
  2016-05-28T18:21:10.081-07:00| vthread-4| I125: Setting destination path for vmnet to "/lib/modules/2.6.32-642.el6.x86_64/misc/vmnet.ko".
  2016-05-28T18:21:10.081-07:00| vthread-4| I125: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
  2016-05-28T18:21:10.087-07:00| vthread-4| I125: Successfully extracted the vmnet source.
  2016-05-28T18:21:10.087-07:00| vthread-4| I125: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-tH7bci/vmnet-only auto-build HEADER_DIR=/lib/modules/2.6.32-642.el6.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no"
  2016-05-28T18:21:11.063-07:00| vthread-4| W115: Failed to build vmnet.  Failed to execute the build command.
  
  
  

  Hi, I faced the same problem, and now I have corrected this issue.

  He was vmnet.ko, at least for me.

  Here's how to solve,

  You can find the latest vmnet.ko of /lib/modules/~previous_kernel_version~/misc/vmnet.ko

  Copy vmnet.ko into your current/lib/modules/your_current_version/misc folder.

  And then run vmware, if you fail at the first, please run again.

  If so, you can run vmwre!

  I hope this will help you.

  Good day.

• ESXI how to install the network adapter driver

  Hi all:

  My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

  Thank you very much

  Hello

  Follow the VMware KB for the installation of the NIC driver, hope it helps.

  VMware KB: Cards not detected on a host ESX ESXi network

• New here - problem with the network on vSphere, ESXi

  Not sure if this is the right place to post this, please direct me properly if it is not.

  I use an eval of vSphere ESXi on a HP workstation. I built 2 Windows 2 k 8 VM 32 bits on the first data store. They can ping and DNS seems to be resolved, but they cannot access Internet/WWW.

  I accepted the default when installing ESXi and vSphere, so the configuration of the network is all that is by default (using the switch vNetwork, I think?)

  The 2 servers are on a different area of our production area. For this case, we'll call it consigment and Lab.com. "PDC" server is the domain controller, 'Exch8' is the exchange server in the lab. Exch8 has its pointed DNS, PDC and PDC has its DNS indicated on our DNS server in the environment of consigment. They are all on the same subnet 172.1.1.x

  I can ping PDC and Exch8 of my workstation (which is in consigment) by IP, but not name (pdc or pdc.lab.com, or work).

  Can someone at - it facilitate troubleshooting?

  Thank you

  OK finally try this out... It must be something to deal with the configuraiton of windows rather than dealing with VMware.I belive

  1. on the server you can navigate on the internet - see the proxy setting.

  See how proxy setting - open internet explore - switch to the option internet tool - connection tab click lan setting and get the configuraiton of proxy and put it in the PDC. Lab.com server and see if it works...

  2. also if you have installed antivirus tools on the server that you are not able to browse internet but able to ping... Uninstall AV and try...

• Install the network and specific peripheral controller on Tecra A8 PTA83E

  Hello

  I have to install windows XP on Tecra A8 PT83E. Everything work fine except 2 devices. Indeed, in Device Manager, I can not install network controller and a device specific. Where can I find the two driver or which driver to install? All other devices are installed.

  Thanks for your help.
  Isabelle

  Hello

  I wonder why you are not able to install the LAN driver and why an additional device appears as an unknown device in Device Manager?  :|

  I ve checked the page pilot European Toshiba and found everything to install the drivers successfully on the Tecra A8 PTA83 series...!

  All the XP drivers are available.
  I presume that check you didn t txt file of installation instructions that was placed on the driver page! Am I wrong?

  Please check this document! You must download and install all drivers and tools specified in the right order!
  The proper installation order is important!

  I think that if you follow the guidelines everything works as it should!

  Concerning

• Install the network and pci controller

  Hello. I am trying to use my pc hp pavilion laptop g7-1219 wn and use the internet, but I can't use internet. I can't connect to the internet. I need to install the pci controller and network for this computer. This is the id number of network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  and here's the number of the pci controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Hello:

  You need these two drivers:

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&OS=4063&product=5158898&sw_lang=

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5158898&sw_lang=

• Need help to understand the network of vSphere environment

  Hello

  I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:

  

  NIC #1 - Management Port (access from client vsphere, vCenter server)

  NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)

  NIC #3 -?

  #4 – CARTE NETWORK INTERFACE?

  Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)

  Q2, what will be the role of the other two network cards? Is it connected to the physical switch?

  * Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *

  I really need to understand the networking of concepts in vSphere, hope that your help!

  
  

  Best regards: Yash

  With an additional NIC with 2 port a general configuration might look like this:

  vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)

  Network VMkernel management

  VMotion VMkernel network (own IP network, own VLAN)

  Better if they is configured as active / standby.

  vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)

  Trade VM

  vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)

  VMkernel iSCSI (own IP network, own VLAN)

  Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Impossible to install the modules that are hosted outside of AMO

  I can't install any add-on that is hosted outside of AMO, in Firefox for Android 40.0.3, nor in Firefox Beta for Android 41.

  What I think should happen: I have download the file as signed (it records to SD card), then open it with Firefox and Firefox should ask me if I want to install this module.

  What is really happening: an add-on is downloaded, but when I open it is file as with Firefox - nothing happens. Firefox comes to shows me a blank screen (see the screenshot).

  My friend has this problem too.

  Looks like a regression bug (because I could install add-ons hosted out of AMO without any problems in previous versions), but I'm not entirely sure.

  So my question is: should I file a bug on Bugzilla or is it possible to install the modules hosted outside of AMO to Firefox for Android and it's just me something wrong?

  My phone has Android v2.3.5.

  UPDATE: apparently, I can not install the modules of local files, but can do some some sites. My module (I have problem with) is hosted on Github, and I can't install it for whatever reason.

  Update 2: it seems that modules can be installed from Github if she is not just a file (because Github changed Content-Disposition of at least some types of raw file of 'inline' to 'attachment'), but a binary attachment to a "news release".

  Apparently, I found a work around for this problem, so that this issue does not require a response more.

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• HP Compaq 6200 Pro small format: Re-install the network adapter

  Dear assistants & members,

  Yesterday, I tried to download a 64-bit system that has not worked and had trouble.

  I am trying to connect to the internet, but it still says: a network adapter was not found (something like that)

  I have seen a lot of messages so I already do my hardware ID:

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C & REV_04

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C

  PCI\VEN_8086 & DEV_1502 & CC_020000

  PCI\VEN_8086 & DEV_1502 & CC_0200

  I hope you self-introduction can help out me.

  I'm computer: HP Compaq 6200 Pro Small Form Factor

  Hello:

  Try the driver directly from Intel.  The hardware ID you posted is for an Intel ethernet card.

  The first file listed is for W7 32 bit.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-

  I was going to ask...

  How did you couldn't get W7 x 64 install?

  I have an Elite 8200, which is the same model as yours, except that it's a chipset series 6 Intel a little better than you do.

  I had no problem installing W7 x 64 on it.

• PC telling me to install the network hardware and check the correct drivers is loaded

  I just installed Windows vista and I can not get Internet. He tells me to install any network hardware and check the correct drivers are loaded. I'm not smart with computers and jargon. So if anyone can help with this question, it would be appreciated. Thank you

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If you have problems on which to install, contact the manufacturer of your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Trying to install the network wireless, but not can not find the installation CD

  I would like to get another CD to install a wireless network for router wrt160n v2. I rest the default router. Prefer to download the installation CD Assistant if possible.

  Thank you in advance for your help!

  You don't need any CD for install/access to the router.  Go to 192.168.1.1 with a computer wired with your browser.  Username blank password, "admin". Now, you can configure the router manually as all.