Install Windows 7 on Vista

Similar Questions

• I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.

  
  

  • I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type. He
  How can I fix t?
  Thanks for a much improved product.

  This thread is perhaps relevant: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b935c1e-9c66-4236-93e8-b3356bfbb7c7 TaurArian [MVP] 2005-2010-implementation to date of Services

• If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  Volumn Shadow Copy Service Componet error 0 X 80042302 (Windows 7)

  If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  If the reinstall is successful then can I re - install my files and photos of my click-free backup hard drive or do I have to drag over the old Windows?

  Thanks for any help!

  Phil C

  You can make one in place-setting day (repair install) using the dvd.  Who reinstall Windows, but does not remove your programs, drivers and files.  You should back up your data first just in case.

  The dvd must be equal to the same service pack level or higher than the windows that you fix.  Check the label on the dvd to see if includes a service pack.  If this isn't the case, you must uninstall service packs on your system before you begin.  Subsequently, you will need enable back again to Windows Update.

  Start the in place--update by inserting the dvd while the office is running.  Click on install now on the start screen, enter your product key when asked and choose install upgrade when the Setup Type selection screen appears.

  Until you do, you can run the System File Checker, because it can replace the files with the right that are cached on your damaged system.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Reset.  That can solve your problem without having to reinstall.  It can not but its worth a shot.

• Install Windows 7 to Vista Ultimate Unit disc.

  Install Windows 7 to Vista Ultimate Unit disc. The page in the installation of "search updates installations" spans more than AN hour. Is this normal?

  Apply update rollup convenience following manually:
  http://support.Microsoft.com/en-us/KB/3125574

  Restart your computer, and then try again.

• I am trying to install Windows 7 on Vista Home premium. Due to some games (I never play) it doesn't let me go anyfurther in installation. I tried everything to uninstall these games. What can I do to complete the installation?

  the games installed on Vista will not let me complete the installation Windows7

  Hi Rachel 30,.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  Did you run the compatibility check before installing windows 7?

  You try to upgrade or perform a new installation?

  What are the games you try to uninstall and you uninstall them completely?

  Method 1:

  Download and installation of the Upgrade Advisor. Read the following article.

  Windows 7 Upgrade Advisor

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Once you have downloaded install Upgrade Advisor and run it on the system.

  Method 2:

  Before you install Windows 7 you should check if the system is compatible or not.

  1. Insert the Windows 7 DVD in the DVD drive.

  2. click the installation option, after the system automatically checks the compatibility and it generates a report.

  You see an error message in the report?

  If Yes, then what is the error message you get?

  If you want to perform a new installation of the backup of your data and follow method 2.

  Method 3:

  If this does not work then you may need to perform a clean installation. Follow the steps mentioned below.

  Warning: In a clean installation, existing data will be deleted. These data include settings and personal data. Back up your data before you perform a new installation. After installing the operating system, you must also reinstall all programs.

  Step 1:

  Perform a new installation of Windows 7 by starting the computer from the Windows 7 Vista

  Note The computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer. Or contact the manufacturer of the computer.

  To perform a new installation of Windows 7 by starting the computer from the Windows 7 DVD, follow these steps:

  1. start the computer.

  2. Insert the Windows 7 DVD in the DVD drive, and then close the drive tray.

  3. restart the computer.

  4. When you receive the message "Press any key to boot from CD", press a key.

  5. follow the instructions to install Windows 7.

  If Windows 7 is now running on your computer, you have completed the installation successfully.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In the tab "install windows" to reinstall Vista I have to choose the "country and region", "time and money" and "keyboard", but there are no options to choose in the "country and region.

  Restoration of the system, Vista Home Premium re installation problems.

  After doing a system restore and restart the laptop, I get on the tab "install windows" Reinstall Vista and I have to choose the "country and region", "time and money" and "keyboard", but there is no options to choose from when I click on the tab "country and region" so I cannot proceed with the installation.

  Hi Cbx_banananuts-Walter,

  You can try to reinstall Windows Vista again and check if the problem persists:

  Installation and reinstallation of Windows Vista

  Hope the helps of information.

• Install windows 7 on vista on my hp computer

  Get the error message. The computer started re in an unexpected way. Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation.  I did it several times and I always get this message

  Hello

   
  Are the upgrade from Windows Vista to Windows 7 or do a clean installation of Windows 7?
   
  If you don't have any concerns of data, I suggest you to format the hard drive before installation and then install.
  For more information, please visit the link given.
  Installation and reinstallation of Windows 7: http://windows.microsoft.com/en-US/windows7/Installing-and-reinstalling-Windows-7
   

• How to install windows 7 on vista 64-bit with USB key or usb hard drive

  I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
  Please suggest.

  Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

  ==================================================================

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key:
  1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
  ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
  ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
  4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Also: A quick way to get your Windows 7 into a bootable DVD:
  (This guide is for people using the upgraded version of the students, composed of)
  Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  Use a USB key to install Windows 7 - even on a Netbook:
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  Cannot install Windows 7 error USB "Setup could not create a new partition system:
  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  J W Stuart: http://www.pagestart.com

• Re-install windows 7 on Vista

  I have a computer with Windows Vista.  Last summer, I bought the upgrade to Windows 7 Home premium and installed.  I have now a problem which requires me to re - install my system.  Once I have restore my system to the original system can re - install windows 7 with the disc that I used before.  the box says for use on a single computer.  I wanted to know before you start to restore and to know that I buy windows 7 again. Thank you

  Hello

  the license is yours

  Reinstall vista, then make the same upgrade to windows 7

  This message is to do with a permit

  one license = installation on one machine

  This is to ensure that you don't think that it can be installed it on 6 computers at the same time!

  If you have problems, reactivation, which you shouldn't, keep this practice

  read below the link on how to activate vista

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  If you have any problems, follow these steps.

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person instead of the automatic fast process

  ·                        When you do the phone activation process hang to a real person explain to, instead of the following prompts for automatic scenario

• I have Windows Vista Home Basic and I would like to install Windows 7 drivers vista with errors.

  I have Window Vista Home Basic and I would like to install Windows 7 then before as I do I have verify errors 4 of my drivers which are

  Microsoft ISATAP adapter #4 also #7 #12 #15 works not properly so I can update the drivers, then she come in saying.

  This device is not working properly because Windows cannot load the disks required for device error code 3.

  So if I can not fix it I can still install Windows 7. Please help because I need the urgency and I tried all week resolve the

  problems under Vista drives me crazy.

  Jean

  To begin troubleshooting, follow these steps:

  1. Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform certain resolutions recommended by the Device Manager.
     1. Right-click my computerand then click Properties.
     2. Select the hardware tab, and then click Device Manager.
     3. Double-click the type of device that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

        A list of devices appears. If a device has problems, the unit has a red exclamation mark next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.

     4. Right click on the device that has the problem, and then click Properties. This opens the device properties dialog box. You can see the error code in the State of the device of this dialog box.
  2. Use the Troubleshooting Wizard, if it is available, to help you diagnose and solve your problem.
     1. In the device properties dialog box, click the general tab.
     2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide. If the Troubleshooting Wizard is not available, go to step 3.
     3. Follow the resolution steps provided by the wizard to resolve the problem.
     4. Check the device status of the device properties dialog box to see if the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3.
  3. If the Troubleshooting Wizard does not have you helped to solve your problem or was not available, search for your error code in this article.

     Note If you cannot find your error code in this article, contact Support. To learn how, refer to the Microsoft Web site at the following address:

     http://support.Microsoft.com/contactus

     (http://support.microsoft.com/contactus)

  4. Follow the resolutions recommended for this error code.
     • Check the status of the device in the device properties dialog box area to see if the error is resolved. If the error is resolved, you are finished.
     • If the problem persists, unfortunately, this article did not resolve your problem. For your next steps, you can ask for help. Or, you can contact Microsoft Support to help you resolve this problem. To learn how, refer to the Microsoft Web site at the following address:
       http://support.Microsoft.com/contactus

• Where my Excel and Word has happened when I install Windows 8 from Vista

  I have an old Vista machine and when I installed Windows 8 they programs have disappeared, but the personal files remain.   What should I use to create new documents?

  Hello

  Thanks for posting your question in the Microsoft Community!

  It seems that you have selected "keep nothing" while upgrading to Windows 8 Windows Vista.

  What option did you choose during the upgrade?

  You can consult the section 'what can I keep when I update' ' if I update and keep nothing howw do restore my files after the upgrade "at the following link:

  Upgrade to Windows 8

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Re-install Office on Windows 8 using the desktop drive and the product key.

  I hope that helps!
  Please keep us informed if you face because of Windows in the future. We would be happy to help you!

• Error code 80070490 installing Windows Update KB975467, Vista.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  Try to run the system update (or CheckSUR) tool to see if it can resolve the error.
  If it cannot, you can edit the CheckSUR.log located atCheckSUR.log Windows\Logs\CBS\
  and maybe we can see what content is not present in the operating system.

  If you do not feel like the troubleshooting update installation failure, you can get assistance for installing Microsoft:
  From: MS09-059: vulnerability in the Local Security Authority Subsystem Service could allow denial of service

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Web site:

  http://support.Microsoft.com/common/international.aspx?rdpath=4  

  North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552

  MowGreen MVP Data Center Management - update of safety Consumer Services

• How to install windows xp over vista on a toshiba satellite A200 1YO

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  AT ¢ A? Â ¢ 1 USB external floppy drive
  AT ¢ A? Â ¢ 2 diskettes
  AT ¢ A? Â ¢ 1 set of drivers for the hard disk on the computer
  AT ¢ A? Â ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  AT ¢ A? Â ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  AT ¢ A? Â ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  AT ¢ A? Â ¢ when windows asks you to press F6 to install the raid drivers, press F6
  AT ¢ A? Â ¢ DISK1 then enter the floppy drive
  AT ¢ A? Â ¢ when it prompts you to press "s" to install the raid and storage controllers...
  AT ¢ A? Press and A ¢ press "s" again to enter on the same raid driver, you just tell windows to use
  AT ¢ A? Windows ¢ A say while there already drivers for the raid controller
  AT ¢ A? Â ¢ press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  AT ¢ A? Â ¢ after loading the disk drivers
  AT ¢ A? Â ¢ wait for windows to ask you once again the drivers then insert DISC 2
  AT ¢ A? Â ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

  PLEASE LEAVE COMMENTS ABOUT HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS

  Post edited by: tamwilson

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  a? ¢ 1 USB external floppy drive
  a? ¢ 2 diskettes
  a? ¢ 1 set of drivers for the hard disk on the computer
  a? ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  a? ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  a? ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  a? ¢ When windows asks you press F6 to install the raid drivers press F6
  a? ¢ DISK1 then enter the floppy drive
  a? ¢ When it prompts you to press "s" to install the raid and storage controllers...
  a? ¢ Press "s" again and press enter on the same raid driver, you just tell windows to use
  a? ¢ windows will say while there already drivers for the raid controller
  a? ¢ Press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  a? ¢ After loading the disk drivers
  a? ¢ Wait windows will ask the drivers again and insert DISC 2
  a? ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

• How to re-install Windows Installer under Vista?

  I don't have the Vista OS CD as the laptop came with the operating system installed. I have the product key, but MS is not a download online for Vista,

  See: http://support.microsoft.com/kb/942288

  Windows Installer 4.5 is now available as a redistributable system for the following operating systems:

  • Windows Server 2008, Editions 32-bit
  • Windows Server 2008, Edition 64-bit
  • Windows Server 2008, editions Itanium-based
  • Windows Vista
  • Windows Vista Service Pack 1 (SP1)
  • Windows XP Service Pack 2 (SP2)
  • Windows XP Service Pack 3 (SP3)
  • Windows Server 2003 SP1
  • Windows Server 2003 SP2

• Install Windows 98 on Vista

  Original title: PC is NOT good!

  In an attempt to solve a problem, using all the help I could find online and in help, I somehow ended up with 3 drives (C, whose space is very low) (D, which it WAS, the original disc and only) and the so-called ' Simple Drive (I think) which is only unallocated space.» Is not a computer scientist, I am to the point that I want to uninstall Vista, then reinstall it. Can I install and older version of the Windows operating system, eliminate everything, then reinstall Vista 'strictly '? I don't want to create havoc more than I already have! Thanks for any help.

  Hi PCPuzzle,

  Please take a look at the following article regarding the installation of Vista.  In particular, please go through the section onThe Windows Installation by performing a clean Installation:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  In the instructions, don't forget to go through step 1 that talks about installing from the disk and step 7 which addresses your partition problems, where to install, delete etc.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think