limited access/no internet connection wifi at home

Similar Questions

• Impossible to access anything whatsoever in the Panel, limited access to internet

  Impossible to access anything whatsoever in the Panel, run antivirus, nothing found, limited access to internet too.  Don't know what to do.

  Hello

  1. don't you make changes to the computer before the show?
  2. what happens when you try to access the Internet?
  3. what web browser you use to access the Internet?
  4. do you get the error message?

  Method 1
  Step 1: I suggest to start the computer in safe mode with network and check if you are able to access control panel and Internet.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  Step 2: If you are able to access the Control Panel on safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem. Make sure that you disable also all firewall and antivirus when you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  I suggest you to create the new user account and check if the problem persists.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

• HP M9V10PA #ACJ: usb. Bluetooth not share internet connection, wifi direct does not

  M9V10PA #ACJ model number

  HP deskjet 5525 e printer all in one

  question: -.

  1.) can print via usb to the laptop window function 8.1, allows to print wireless from my smartphone Android based without direct WiFi router, connect to eprint, wireless with mobile router but can not print from my new hp laptop network is limited with! sign and the printer is not detected. (if printer problem, then it can not print from mobile and if problem laptop, he could not able to connect to internet I use.)

  2.) my computer laptop wifi direct support means can I Exchange offline like bluetooth and can my printer is my computer laptop wifi and I can connect from printer.

  3.) bluetooth teathering in andriod do not share internet on my laptop when I teather.

  4.) usb teathering does not share internet to andriod which is samsung galaxy mobile new j7 sharing internet via wifi.

  None of your support team is able to answer all these questions and not even want to listen to. All what they just time passes I try for 5 6 7 6 hours wasted days. they have just replied to the request is transferred to the technical service of master. If you have a mail solution please me [email protected]

  USB and bluetooth internet sharing in 8.1 window I had to update my driver in the Device Manager I have updated ndis network driver that was yellow highlighted in color and it was not installed in window 8.1. After installation two teathering worked well.

  For direct wifi in the printer I just on my direct wifi on my printer and network printer highlighted me in networks in form of PRINTING HP 41 Deskjet 5520 series with signs ! in wireless. ! sign simply means the network is limited and cannot share internet. So jusst linked to that as network limited and then used software to connect as wireless HP printer. It worked well, but have still the issue with speed on the network even my signal is full. Wifi printer on the direct network access speed is very very slow, I'm connected.how to improve the speed, I don't know.

  Another issue is that my laptop is same average direct wifi capabilities to communicate with other devices can I create my own hotspot by laptop same name network HP-PRINT 41 Deskjet 5520 series in printer not supposed to share internet, but at least for wireless data sharing.

• limited on the Internet connectivity

  I use Vista Business, and although I can connect to the Internet, I have "limited connectivity" and cannot access the Internet. I know it is a bug with Vista and I downloaded and installed all the updates, but I still get this error.

  Help, please - I need to work!

  Thank you, Laura

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• After 6/18 Windows 7 updated, limited access to Internet wireless (HP Pavilion dv6-2152nr)

  HP Pavilion dv6-2152nr notebook PC

  Intel Core i3 CPU [email protected]

  WA763UA #ABA

  Broadcom 43225 802.11b/g/n

  Windows 7 Home Premium

  64 bit

  After that Windows update on June 18, our HP laptop could not connect wirelessly to the Internet. We get the great signal from our router, and when you start the computer it shows full connectivity for about 15 seconds. After that, we get a warning orange triangle on our wireless icon and a message of limited access. I tried a restore of the system for June 16, but it did not work. I tried to start the diagnosis, but we get the system cannot identify the error. Thanks for any help!

  Hi Mike,.

  I would try temporarily uninstall your security software - if you are using Norton, use the relevant removal tool for your product here.

  During the uninstallation, restart the computer and check.

  Kind regards

  DP - K

• Unable to access secure Internet connections

  I have my laptop series satellite has recently stopped for allowing me access to secure Internet connections. When I spoke with my Bank's online support, they identified that I will need to reinstall the xp home operating system and it will get it back. Only thing is, is that it came pre-installed, and I did not all discs...

  I don't want to pay a bomb buy new XP - any suggestions on how I can make low-cost cela? I get a new digital / provider internet tv etc Thursday the engineer came to the House to install it and I need to have this problem before it happens (this leaves me a day and a half!)

  Help! Thank you! :)

  Hello

  Try to contact Toshiba service partner allowed in your country and order the original CD from recovery for your unit. I'm sure that it will not cost you much.

  You can find the address under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Establishment of a network without internet connection wifi

  I'll set up a wifi network in a place WITHOUT an internet connection.

  I have an Airport Express to the location and my MacBookAir.

  I have a Samsung smart TV in the place and I would like to use it to watch the content on my laptop (iTunes and elements in the movies folder), but can't find a way to do it. I tried an AppleTV 3rd generation, but which will not work because it requires an internet connection to complete upward. I'm not having luck with Airplay or mirror screen either. I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  The TV has two HDMI ports, one for the cable/satellite and one for a DVD player (MHL / DVI). It also has an ethernet port and a USB port.

  I would like to * fine * want to stream from my laptop to my TV, but if I can't do that, I'll do it, installs for all cable set up will get the video and audio into the TV. Y at - it a box of streaming that doesn't require Internet?

  Welcome suggestions, especially if they are in basic English, I'm really bad at the net jargon.

  Thanks in advance!

  You can be very sure that other people have tried.

  Solution of workaround for apple tv without an internet connection?

  Just using a tethered phone or even dial-up internet so that DRM can work would help.

  http://physedagogy.com/2014/09/25/no-Wi-Fi-no-problem-using-Apple-TV-to-mirror-y our device without wifi.

  A lot of blogs on this topic and a lot of useful info in some of the answers.

  Y at - it a box of streaming that doesn't require Internet?

  Loads of them... look for the Plex.

  The problem is (most legitimate at least) media sources tend to put a priority on the establishment of copyright law.

  I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  Switch sound on hdmi.

  IA-Thunderbolt-HDMI-connecting-to-HDTV http://Apple.StackExchange.com/questions/92493/How-can-i-Troubleshoot-no-audio-v

  Again, you are not the first to have the problem... loads of experience if you googled around to find out how to get his work... or if the laptop is a model then it might be impossible.

  Apple makes things difficult when you don't have internet... it is just to have a tethered phone and really just do the little bit of work involved in the installer... or the same 56 Kbps dial-up modem.

• Limited access to internet - wifi

  Just unpacked my new T510 and discovered a nasty problem with Wi - Fi. I CAN connect to the unsecured router my neighbor - but not to my secure wifi.

  • I see my router, but logins refuses to connect - give me just a different "" error each time and a big red X where the green bars should be;
  • If I connect manually through windows, I can get a connection, but get 'limited connectivity' - that means no internet access.
  • I have not installed Readycomm.
  • My router is windows 7 compatible and I use the setting of personal security to WAP2
  • I rebooted several times.
  • I am ready to throw this computer out the window.

  Problem solved. I dropped the d-link router and bought a new Linksys router.

  Cost of a new router $65.

• T61p not internet connection WiFi

  I have a T61p 6459 with an Intell Wireless WiFi Link 4965 AGN inside network adapter. It was working fine until the right signal strength for a few days when I would be connected to the network all of a sudden I would lose Internet access but then I always 100%. I have tried dissconnecting and that has not worked. Then I rebooted and it worked but only for a few hours, what is the same thing. Now, even with a reboot I have 100% signal strength, but no internet access.

  Help me please!

  Your wifi network adapter does not connect to internet, it only connects you to a local access point, usually a router, whose job it is to connect to the internet. Try to turn off your router for a minute or two, in fact completely the unplug, wait a minute and a plug it back in and then see if you can connect.

  If so, you can then focus on an update of the firmware of your router, if the problem persists.

• Remote access over Internet connection problems

  I'm trying to figure out how to get remote access to work via the internet. I used to work and it works very well, but we are also on a local network. I have sent the invitation to someone and the password, but it does not connect. I tried the following:

  • Computer Management / Services / connection manager (manual) remote access & routing and remote access (manual)
  • Windows Firewall / allow a program... / Exceptions / Allow: Remote Assistance & routing and remote access
  • Disabled Norton Firewall

  I have alos got my friend to make sure that its parameters match mine. And I still have no success. Does anyone have other ideas? Alternatively, it won't work because I am trying to connect via the internet?

  Hi nataar, 

  Welcome to Microsoft Answers Forums.

  • What software do you use for remote access?
  • What is the version of Windows installed on the computer?

  If you use Remote Desktop connection in Windows Vista, try the procedure below

  Log your PC computer with an account that has administrator privileges.

  Step 1 open the start menu, right-click on "My computer" and select "Properties". A window with the options and details of the computer opens on your screen.

  Step 2 go to the 'Remote' tab at the top of the window "Properties".

  Step 3 check the box for the option "Allow users to connect remotely to this computer" in the section "Remote Desktop" in the Properties window.

  Step 4: click on the 'Apply' button at the bottom of the window to save the changes and enable the remote desktop. Outside users will now be able to access your computer over the Internet.

  Enabling remote desktop access to your computer

  To activate the Office remote connections to your computer, follow these steps:

  1. Click Start, right-click computer, and then select Properties.
  2. Under tasks, click settings on the remote control and confirm the user account control prompt.
  3. Select allow connections from computers running any Version of remote desktop. (Version 'more safe' only works on using IPSec security, and on these networks business networks, you probably will not be allowed to change these settings in any case).
  4. By default, all administrator-level accounts can connect to the computer. If you want to grant remote desktop access to a limited number of users, click Select users, add, advanced, find now and then find the desired name in the search results section. Double-click it. To add another name, click Advanced and find now again.
  5. Click OK to close the dialog boxes.

  NOTE A password must be set on a user account before the user can connect to the remote computer.

  At this point, you must do two things to make sure that remote desktop has been implemented correctly:

  • Click Start, Control Panel. Under Security, select allow a program through Windows Firewall and confirm the user account control prompt. On the Exceptions tab, find the Office remotely in the list of Exceptions and do not forget, that it is checked. If it isn't, check it out. On the general tab, make sure that block all incoming connections is not checked.
  • Use another computer to test the remote desktop before you get involved in the Internet game. Follow the instructions in the second part of the chapter to open the desktop client remotely on another computer on your network. As the host name, type the name of the computer you just put up. Make sure that you can connect on your own local network before continuing.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Limited or no internet connection message

  I had recently so that the operating system reinstalled on my laptop Dell of girls.  I also have Norton 360 installed on it.  When I had the home computer it worked fine.  Better then ever!  When I dropped it with my daughter in her place, we cannot get it to connect to the internet.  He see the network but says "limited or no connectivity."  By phone I had to make him some malfunctions and she told me that she received a message on a Winsock problem.  How can I solve this problem and get her back on line?  Why would it work here, but not at home?

  Here is the Vista Forums.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Not able to share the internet connection WiFi ad-hoc assistance.

  Original title: sharing wifi on ad hoc.

  I want to share my connection to internet wifi in ad hoc aid. IM able to create a network ad hoc but both the host and client are not able to connect to internet

  Hi KarthikBN,

  The same adapter wireless or wired are unusable in both networks. This means that a network adapter must be used to connect to the Internet providing and other should be used to create the ad hoc connection.

  Hope the helps of information.

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• After a power cut, I have to sign up with a password to access my internet connection.

  original title: now broadband CONNECTION MANUAL

  my connection broadband used to be automatic.

  After a power failure, it will automatically connect local.

  I have to manually sign with broadband connection password.

  IE7, VISTA, Verizon should be information you need.

  my Skype and Skype recorder fail because the connection is broadband

  is no longer automatic.

  Hello

  The Id and the password are usually enterd in the Mode/router and maintains the connection to the life there.

  Check the configuration of the router/Modem WAN and redo it ID and password (see the manual of the router/Modem for how-to).

  If you can not understand call Verizon support they guide you through the process.

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.