Install Windows 8 Pro the U410

Similar Questions

• Install Windows 7 Pro the Dell laptop w / OEM Windows 7 Home Premium

  I have a bit of a MESS! Bought a Dell Latitude Laptop online, which was supposed to have Windows 7 Pro.  When receipt he did 7 Home Premium. Found I had problems with some XP programs running and finished by the seller to send me a genuine disc "Réinstallation DVD Windows 7 Pro SP1 64-bit," Dell and a key COST and product.  My concern - since they are BOTH the OEM versions of the operating system and a new drive a "Reinstall" rather than an "upgrade" - is that going to reformat my hard drive and destroy all my drivers and the factory pre-installed programs?  Dell installs a number of vital programs to run the webcam, diagnostics, audio, secure data backup, etc., and all necessary hardware drivers, but they do not send copies of disc.  How to backup all this?  And then, everything I need to copy from the system to be able to reinstall the programs?  Seems an almost impossible process... A drive to "Reinstall" OEM gives you an option to simply replace the operating system and everything still leave it alone?  I certainly don't want to start without knowing what I am getting into.

  Would appreciate certainly no help...

  Nancy

  Thanks for your quick response. I'm a little nervous because of all the issues that I had with this laptop - then just one last question for confirmation - if I buy a key to upgrade to 7 Pro AND use the Express Upgrade Wizard, it WILL NOT reformat my hard drive?

  That's right, see how it works:

  http://www.notebooks.com/2009/10/26/Windows-7-anytime-upgrade-%E2%80%93-unlocking-more-benefits/

  
  

  When I am in fact, drivers for all my hardware and programs installed and my data will always be there and accessible under the new OS? Thank you. Nancy

  That is right.

• Pavilion model 11-n001sa: installing Windows HP pro on the HP Pavilion model No. 11 - n001sa

  I replaced the original hard disk, it was windows 10 installed.

  This small laptop is idea for my Renault Clip software, so we need to install Windows XP pro.

  I tried different setting in the bios, XP is listed, theres so no reason for it not install it!

  Using windows XP pro sp 2 & 3 installation disc, but keep the blue screen dreaded towards the end of the installation.

  Come on HP, I need your advice please.

  Hello:

  There is a very good reason that XP does not install.

  Intel did not provide any sata ahci drivers for the chipset that has your laptop.

  That's why you got the BSOD.  XP cannot find the hard drive.

  The latest processors from Intel-based notebook chipsets which had support for XP have laptops with the 7 Series chipsets.

  Not to mention the fact that you wouldn't find any graphic or wireless drivers for XP even if you can get it (that you can't) install.

• If I installed windows 8 rtm company I can install windows 8 pro at the end of the assessment?

  at the end of windows 8 rtm company can I install windows 8 pro and keep files and programs?

  Hello

  You should be able to keep files and settings, but you may need to
  reinstall your programs.

  To make sure you get check correct information in the TechNet Forums where Windows 8
  Enterprise Edition is supported.

  TechNet - Windows 8 IT Pro
  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• MSVCR71.dll missing. I installed Windows 7 Pro to Vista Home Edition. EU back up my HARD drive. When I try to put things on the HARD drive I get the message that msvcr71.dll is missing. How to install Windows 7?

  I installed Windows 7 Pro to Vista Home Prem Edition.  Back up my HARD drive with the included HP software.  Now I can't get my info on the HARD drive.  When I try to open the computer file backup says msvcr71.dll is missing.  How to install and where?

  Hi dezertdawg,

  Welcome to the Microsoft Answers site!

  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
  problem of registry, a virus or malware problem, or even a hardware failure.

  You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install windows 7 pro, when I mistakenly installed the 32-bit version instead of the 64-bit version

  I just installed windows 7 pro.  Unfortunately, by mistake I installed the 32-bit program on 64-bit program.  now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows.  upgrade I need the disk to correct installation.  so he said to shut down your computer and reboot the installation disc. »

  but when I reboot it just goes directly to the office.  would someone kindly give advice on how I overcame this misadventure?  I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version.  I still have the discs and software keys... Thank you.
  Prior to this installation, I was running 32 bit XP pro

  You'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.

  Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.

  With the 64-bit DVD in the DVD drive, restart the computer.

  Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,

  Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• After I installed Windows 10 pro, can't select all-family fonts or fonts, DW CC 2015, in the CCS Designer

  After that I installed Windows 10 pro, cannot I select everything-families of fonts or fonts, DW CC 2015, can I use CCS Designer. I'm not getting -families of fonts or font in the drop-down list

  I can't reproduce your problem.

  

• Cannot install Windows XP Pro on the Satellite A100-411

  Hello

  IA´ve you have a question. I have a Toshiba Satellite A100-411 with Windows Vista Home Premium. Because of the performance that would have me much better with Windows XP, I tried to install Windows Xp on a second partition, but on the same hard drive.

  The problem is that it did not work, I put the Windows XP cd in my DVD player, did a restart and started from the cd.
  The first window Windows Xp installation opened and checked my system, but when he did and
  wantet to start the main installation, I got a blue screen, where stood her system was closed due to an error and that I should change my video card, or should I turn caching and shadowing in my Bios.

  But my video card really works and is ok and I can't find the caching and shadowing in bios, so I can't install windows xp.

  So my question is is it possible to install Windows XP on the A100-411 when Vista is installed on the other Partition.

  I did something wrong or isn´t is it possible to install Windows Xp after Windows Vista on an A100-411
  Sorry for my bad English and greetings from the Germany

  Hello

  Of course, it should be possible to install Windows XP on the second partition.
  First you must create the partition. Vista provide a clean option for partitions of creation because the 3rd party applications such as Partitions magic doesn't work under Vista. In disk management you can reduce the size of a partition of first and could create a second partition on the HARD disk free space.

  All your Windows XP CD contain service packs? I myself remember more old CD s WinXP don't were not delivered with SP2! In such cases, it s a good idea to create a clean XP Boot CD using 3rd application called nLite. Its freeware and you could find on the net!

  Please check this!

• Installation of drive Media Express before you install Windows XP - Pro?

  Hi all

  I want to install Windows XP Professional on my Satellite A100-153.
  I have already done all the backups, created a tool and driver CD and I'm ready to start... BUT:
  What the Express Media Player? I have a recovery for the Express Media Player CD. What do I need to run the Express Media Player Recovery before you install Windows XP Pro?
  I'm not reinstall my Windows XP HOME Edition. As I am used to work with the XP pro edition I have a Windows XP pro. So no recovery.

  Can someone help me?
  Thank you very much!

  Hello

  Installation of the drive, I found a FAQ document very useful on the Express media:
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated.
  To get this free space of HDD the 3 products part must be used namely Partitions magic 8

  good luck buddy

• Cannot install Windows 10 Pro bootcamp support software

  I have recently installed Windows 10 Pro on my MacBook Pro (15-inch, mid-2015, retina), OS X El Capitan 10.11.3 (15 d 21). After Windows restarted, bootcamp has started to install drivers from support and hung on the Realtek driver. Let him all night but he still has not made progress, so I closed the installation program. Now I can't find how to restart, or to download the drivers and install them manually. I had to hold the option key when you restart back into OS X. According to the oldest documents, I tried rerunning the bootcamp assistant to download USB drivers, but this version gives me the option to restore my drive to its original state. Does anyone know how to fix this?

  Thank you.

  I couldn't find a place to download the drivers for bootcamp support and discovered in training camp 6, the drivers are downloaded on a separate partition on the SSD (instead of USB drive). So I wiped the installation of windows and repartee with the intention to copy the downloaded software (which I did). Yet once bootcamp hooked when installing the Realtek driver and did some googling. I found this post that solved my problem. https://discussions.Apple.com/thread/6567790?TSTART=0

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Desktop HP - 110 - a04: installed Windows 7 Pro on my desktop HP - 110 - a04. Windows 7 drivers help?

  Installed Windows 7 Pro on my desktop HP - 110 - a04.   Windows 7 drivers help?

  Hello

  I couldn't take it any longer using Windows 8.   I installed 7 Pro 64 on this machine, only to find HP doesn't provide drivers for 7 for this particular model.

  The useful link below got my work to adapt (LAN) network.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/HP-110-017C-downgrade-to-Wi...

  Currently, I am missing the drivers below.

  Network controller (possibly the wifi adapter)

  SM Bus controller

  (USB) Universal Serial Bus controllers

  Any help on this problem is highly appreciated.

  Thank you

  Hello:

  Please see if these drivers work:

  SMBus:

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

  USB3:

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  I need to make a simple set of clicks in order for me identify the model of wireless card which needs the driver.

  Since there is no driver installed wireless, need a labeled device network controller in Device Manager under the other devices category.  The network controller device will be somewhat ! brand next to him.

  Thus, to find the network controller device, click on that and then click on the Details tab.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window.