Install Windows alongside linux systems

Similar Questions

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install Windows on my system? Currently it is under Ubuntu.

  I need to get windows xp or vista

  I need to get windows xp or vista on my acer aspire 5315 right now, ubuntu operating system is installed

  You use the manufacturer's recovery system to reinstall the original Windows. -If the partition on the disk was destroyed when you have loaded Ubuntu (very likely), then you will need to use the disks, you must have created when you got the machine, or a set of discs, you can order from the manufacturer.

• After installing Windows 7, the system does not work properly and must use the last known good configuration

  I installed the upgrade of Windows 7 a few months ago, my system was Vista 64 for everything I need, it was the upgrade, when I turn on my PC, my Start menu is not and none of my icons, to fix what I have to keep turning off my pc and turn on again by pressing F8 then go down to the last known configuration, how to fix this without having to shut down my PC and press F8 so that it starts normally all the time

  Download malwarebytes and run a virus scan to make sure that your computer is virus-free.

• Cannot install Windows Vista updated system preparation tool

  I downloaded the update for Vista 32 bit system preparation tool, but when the program tries to install after initialization, the installation progress bar never appears, the installation seems to just "hang" and do nothing.  I tried to cancel the installation, but the program seems stuck, I use the Task Manager to cancel the installation.  I wonder why the tool cannot install on my PC after downloading.

  Hi mlzla,

  I hope you do well.

  No, if you do an upgrade on the spot, you will lose any program. The on-site upgrade process will take around an hour or two. It is very useful.

  I hope this information is useful.

  Concerning
  Rehman - Microsoft Support

• Install Windows 8 OEM System Builder DVD on aspire S7

  Do I need to implement all special partitions? Can I download drivers S7 beforehand? or Windows 8 will automatically find them?

  Well, I've just finished using Acer Recovery Management.

• Install Windows 7 on system Skylake 6100

  I can get the boot in UEFI, but it freezes when I get to the Windows installation DVD installation screen.  Is there a solution?

  Nevermind, I found the answer of the manufacturer of the motherboard.

• Satellite A200-23W: problem installing Windows Vista

  Hello..

  I now that this topic is discussed several times before, but after trying many solutions of the forum and some of my only, I reached a level that it makes no sense...

  First off I would like to explain what I do for a living, it has to do with IT and that is what makes it even more tempting for me.

  2 days ago a friend bought a Toshiba A200-23W. The first thing I always do when I buy a new laptop is to format it and install a clean Windows operating system.
  After my first attempt, I realized that I have to install first the matrix storage driver.

  I downloaded the driver from toshiba place related to my model. (Intel Matrix Storage Manager - 7.5.0.1017).
  I created a usb key with the required driver files:

  iaAhci.inf,
  iaAhci.cat,
  iaStor.inf, iaStor.cat,
  iaStor.sys, and
  TxtSetup.oem

  in the folder (F6flpy) of the (Intel Matrix Storage Manager) you can copy them to the root of the USB stick.
  When the form "Where you want to install windows" windows Vista appear I select load the driver, and then by clicking (Browse), I select the USB drive as source for my drivers.
  The (Intel(r) 82801HEM/HBM SATA AHCI Controller) will automatically appear as a choice and by clicking on the (Next) the process of the pilot installation begins.
  So far so good..

  Here's where things get complicated...
  When Vista back to the form "Where you want to install windows", even my system has 2 x 200 GG HDD only 200 GB HARD drive appears in the list...

  Selections of 'New' Partition, or a Partition of 'Delete' are disabled.
  and even when I click 'Next' for selected HD a windows message:

  "Windows has no determine if this computer contains a valid system volume."

  I'd appreciate your help...

  Thank you in advance...
  George P.

  Hello

  You cannot format the HARD disk or delete the partition because this would remove the SATA driver too, and the HARD drive would not be recognized by Vista!

  Therefore, you need to install the OS on the HARD drive that is displayed in the installation program.

• How can I get my programs to run after re installing Windows XP?

  I had to Re install Windows XP operating system. Now my program file no longer run. They seem to still be present in the Program Files folder, but do not work. the most important is my cable modum so I can access the internet.

  Hello

  1. you install windows XP in a different drive?
  2. what programs are they?
  3. what exactly happens when you try to run these programs?

  If you need to reinstall the windows XP operating system, you must install all of these programs again in the new installation of the operating system.

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 OEM System Builder Pack

  How to install windows 7 OEM System Builder Pack on my own hard drive?

  Hey rcseng.

  You must perform a clean installation of Windows before installing the OEM System Builder Pack. Prior to this, download and install the preinstallation OEM (OPK) Kit which is included in the OEM System Builder Pack. You can also download the Microsoft Web site OEM preinstallation kit.

  Here is the link to it:
   
  Windows 7 OEM Preinstallation Kit (OPK)
  http://OEM.Microsoft.com/script/contentPage.aspx?PageID=565676

  The Windows OEM preinstallation Kit (Windows OPK) is a set of tools and documentation that support automated installation and customization of the Windows operating system. The OPK is easy to install and use, and will save you time compared to a manual installation.

  For more information about installing custom / clean, see this article.

  Installation and reinstallation of Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• E.M.P. 11.1.2.2 under Windows or Linux

  Hi Experts,

  Which environment is best for the EPM, Windows or Linux system?

  I want to run below the products based on your opinion...

  1. Oracle Hyperion Shared Services
  2. Oracle Hyperion Planning
  3. Oracle Hyperion Essbase
  4. Oracle Hyperion Reporting and analysis (financial reports)
  5. Oracle Hyperion Financial Management (HFM)
  6. The Oracle (FDQM) Hyperion financial data quality management

  I would like to run all above products either on Windows or Linux (not mixed mode)

  Your comments please!

  HFM & FDQM are not supported under Linux because they are Windows-based products. Check the Support Matrix: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls

  You can go to Windows if you opt for 1 single BONE for the rest of the EMP.

  Kind regards

  Santy.

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• System partitions and upgrade to Windows 7, Linux

  Yesterday, I bought my first CV - ProBook 4515 s model with SLED 11 Linux preinstaled. Given that I'm not familiar with Linux systems first thing I did was to install Windows 7.

  My laptop came with 4 partitions that is formatted in a file system that Windows does not recognize. I'm guessing a partition for installing Linux, two of them are system (HP_TOOLS and HP_RECOVERY) partitions and the fourth was just an empty disk. So I formatted the fourth partition and installed Windows 7.

  The problem is now that I am out of system partitions, so can not access other software preinstaled and QuickLook. I tried a single partition format and rename it to HP_TOOLS and then tried to install QuickLook v. 3 but the facility reported that my system has not been supported? I don't want to mess with the other partitions in the fear that I could remove the BIOS, but want to sort this mess up and would certainly like to have some of the options that is is installed with the system.

  Any suggestions?

  Message edited by Martine on 14/10/2009 14:07

  I think that the HP_TOOLS and HP_RECOVERY partitions are formatted as ext2 or ext3 file system, Windows cannot read. It can only read NTFS and FAT32. There is no way I can think to convert the ext2\3 to NTFS without keeping the integrity of the system. In addition, the files are all intended for linux and not Windows. He has makes no sense to do that. That said, I'm not sure if your laptop has Windows 7 drivers now.