Installation agent question

Similar Questions

• Calculate the resources-vCAC 6.0 vSphere Agent question

  Hello

  I have a related question Agent vSphere, vsphere Agent connects only shows the error in the picture, because I'm trying to set up a group of Fabrioc no calculation resources whas shown for the account that I use.

  Thank you!

  -vRay

  After reinstall Agent for the 15 th time and wait for about 10 minutes of frustration, it works, I n believe in miracles, but here's the evidence, what I've done:

  Reinstall the name of different Agent than on complete installation

  Recreate the different name endpoint of that on complete installation

  Check all the newspapers of the time

  Place the account that I use for vCAC as the local administrator in vCenter Server

  Reboot identity SSO the vCAC App

  reload the credentials and to recreate endpoint config I mena on vCAC as infrastructure admin.

  any mode of paranoid way.

• Probems with the service for all users of Windows Installer Agent is not able to run

  Day 2 after the installation of Windows 8 on my desktop PC, all the user accounts with a standard profile are unable to connect. However, my admin account can connect and I get a message saying that the 'Agent Windows all users install' does not work so why accounts no administrator cannot connect.

  I restarted the service but she turns for a few seconds and ends without a message. Several attempts to restart it have failed.
  Is this a problem with Windows 8?

  I just found out that I must be an ADMINISTRATOR to do. Thanks much for the reply

• View installation agent causes slow connections at the office (office preparation phase)

  Im running a question with 5.2 view that whenever I have install the agent double or triple the time of a new user to connect to the desktop if I uninstall the agent goes back to normal...

  Windows 7 without an agent takes about 10 to 15 to connect...

  Windows 7 with agent takes about 35 to 90 seconds of connection... it is stuck at the stage Office prepares for most of the time...

  in our field to exclude some Group Policy objects

  If we use PCoIP connect it takes about 30 to 45 seconds

  If we use the console or explosion, it takes as much as 2 minutes...

  I tried to build a new vm and was able to reproduce the time by installing the agent.

  anyone else seeing this? is this normal?

  IM about to try windows 8 to see if I can reproduce the problem on this OS

  The issue has been linked to the function of thinprint agent. We removed the virtual impression of the agent, and now the opening of session are compatible on all protocols in 30 seconds...

• New R12.2.2 Installation: A question to statements of account and group on UNIX

  I'm reading installation guide to prepare for the rapid installation on this version and I have a question concerning the account and the group must be created for Oracle database layer.

  In part 1-16 installation guide says:

  The user of the operating system that has the data node file system and begin it

  Services database node is called the oracle user. This user must be created with a

  primary group 'dba '.

  I understand that like:

  1. create the group 'dba '.

  2. create a for example 'oracle' user and assign the user with a core group of "dba".

  My question is in the process of entering the parameters of the configuration quick installation file,

  I need enter 2 parameter data base operating system user and group data base operating system.

  It is easy for me to understand the 'oracle' user should be the OS user database.

  But here the Group of database operating system must be "dba" or not?

  Is it possible to give the name of the group other than "dba" here?

  I'm confused in this part and hope someone could give me help.

  Thanks in advance,

  Robin

  Robin,

  You should be able to use any other group to the role of the admin group by default is "dba"

  Oracle database preinstallation tasks

  Thank you

  Hussein

• Windows Installer - constant question

  Why keep having reset the windows registry to install?  I always feel like I have to check to make sure that it is there and if not, I have to do the reset procedure.  To do this, reboot and everything is going well for a few days and that he disappears again and I have to reset it again.  It happened for about six weeks.  I realize that it isn't there when I updates software and it fails like Adobe, etc.

  Thanks for your help.

  Hi clb7122,

  Try this, it will fix your Windows Installer problem

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  I also had iolo which weaken my Windows Installer and I never install more.

  Hope this helps

  Please come back if you need more help

  Thank you

  Makoi

• Inspiron One 2320, Windows 7 Pro 64 bit, the installation order [questions]

  After installing Windows 7 Professional 64-bit (Windows 7 Home Premium replacement).  Using the tab order of Installation, I finished the first category.

  LAN works.  The WIFI does not work.

  Suggestions?  Comments?

  Attachments:

  

  

  I'm guessing that you have sought pilots using your Service number, unfortunately, frequently missing some essential drivers.

  Since your jpg shows that SM Bus controller is marked, it seems that you have not installed 2 chipset drivers Intel for Win 7 or Ethernet, WLAN and card reader drivers:

  1. Intel Chipset Software Installation Utility
  2. Intel AMT HECI
  3. 5139 Realtek card reader driver
  4. Realtek RTL8111E Gigabit Ethernet Controller
  5. Driver Atheros Wireless, either 1502 WLAN or 1702 WLAN + BT Combo according to what WLAN card you own.

  2 drivers Intel should be installed as the first 2 drivers after loading Windows 7.  Without 2 chipsets, the other drivers cannot install or may not work

  Install the Intel 2 drivers in the order listed above, and then restart. Install the other 3 and then reboot again. Some / all of the last 3 may ask you to restart to complete the installation, so do this before moving on to the news of the driver.

  See if that fixes things.

• WebMonitor Agent question

  Being dense myself typical, sorry. I test the WebMonitor agent and I get an alert on Server_Availability. When I enter the URL in a browser, I am able to access the page.  I get the same result when you use Get header or get Page.  I just need help to understand how it works. (had to clean up page)  Thank you

  

  The agent does not 'wget' but rather a native call to fetch the page, but it is likely that you are on the right track; the page request can be blocked by a firewall rule.

  You can monitor a public web page (e.g. http://www.google.com) of this Windows Server? You can monitor the URL target of an agent WebMonitor deployed on another (for example Linux) machine?

  Kind regards

  Brian Wheeldon

• 12 c Agent question

  Dear gurus.

  Today one of the agent is stopped working and I am getting below error.

  Agent is blocked. Is blocked: Agent is out-of-sync with the repository. This probably means that the agent has been reinstalled or recovered. Please contact an administrator EM to unlock the agent by performing a resynchronization of the agent from the console.

  Event, I tried to unlock the agent on the OEM portal by navigating Setup-> manage Cloud control-> Agents and selected agent on and clicking on unbloc but immediately his once again blocking...

  So I tried on the agent server by running below command but no luck

  1. status emctl agent

  2 emctl stop agent

  3. delete the files of

  CD $AGENT_HOME/sysman/emd/upload and

  CD $AGENT_HOME/sysman/emd/State

  4 emctl clearstate agent

  5 emctl sure agent

  6 emctl start agent

  7 emctl pingOMS

  My current state of the agent is

  Oracle Enterprise Manager Cloud control 12 c Release 2
  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent version: 12.1.0.2.0
  The WHO's version: (unknown)
  Protocol version: 12.1.0.1.0
  Home Agent: / agenthomepath/agent_inst
  File binary agent: /agenthomepath/core/12.1.0.2.0
  Agent process ID: 446599
  Parent process ID: 491719
  Agent URL: https://agenthostname:3872/emd/hand /
  URL of repository: https://gridserverhostname.domain.local:4904/empbs/upload
  Starts at: 2013-07-09 11:15:18
  Started by user: oracle
  Last charging: (none)
  Last download successful: (none)
  Last attempt to download: 2013-07-09 11:15:57
  Total megabytes of XML files uploaded so far: 0
  Number of XML, files waiting to be loaded: 1 344
  Size of the XML files in the upload wait (MB): 6,51
  Available disk space on the file upload system: 12.69%
  Collection status: activated Collections
  Pace heart status: Agent is blocked
  Last heartbeat to WHO attempt: 2013-07-09 12:00:58
  Last pulse successful who: (none)
  Then, at the request of the heart rate to WHO: 2013-07-09 12:03:58

  ---------------------------------------------------------------
  Agent is running and ready

  Could you please check and help me to solve the problem. Thanks in advance...

  Kind regards

  Satish kumar Sadhu

  David s thanks for your reply... Earlier, I solved the problem of resynchronization of OEM... feels happy

• Interface of host agent questions more is more recent than the server

  I noticed that my host in Lab Manager is available but not ready state, which means, I can't really do anything.  The error I get is:

  Preparation error

  With interface '5' agent version is newer than the server interface version '2' on the host.

  Any suggestions?

  Thank you!

  This host was used with vCloud Director?

  You cannot prepare and ESX host with LM previously sanded Director of cloud.

  Best regards

  Jon Hemming

• 11g installation OAM-question

  Hello
  
  I installed OAM 11 g (version: 11.1.1.5.0) with Oracle Database 11g R2 and RCU (Version: 11.1.1.3.3). After you start weblogic admin server, I get the following errors:
  
  (a) OAMSSA-06251: policy store does not support detected. Required '11.1.1.5.0' but found "11.1.1.3.0".
  (b) could not communicate with one of the configured access server, make sure it is running.
  
  Update the policy store is anyway? or I need to re-run the installation program?
  Also how to start the access server?
  
  Asked to clarify the above.
  
  Thank you
  
  Srikanth

  The problem is with the installation. If you run Setup again you will run on these issues.

• Installation & registration Question...

  QUESTION #1

  I just downloaded PhotoShop CC and it works very well.  The download includes three files:

  CreativeCloudInstaller.dmg

  CreativeCloudInstaller - 1.dmg

  CreativeCloudInstaller - 2.dmg

  I used one.  Other duplicates of files or contain other necessary functions of PhotoShop?

  QUESTION #2

  What I have to enter my CC PhotoShop downloaded or has done automatically at the time of my purchase?

  Yes, other downloads are duplicates, and they aren't necessary funtions of Photoshop.

  As connect you to the cloud creative and installed desktop application any application using it. It will go automatically pick the credentials of your of

  and a license for the application.

• create fisical agent - question

  Hello.
  
  I would like to create a physical agent in ODI10.
  I get errors trying to create it.
  
  I wonder if it is only through the topology manager or do I need to change or configure some other file type odiparams.bat
  
  Enjoy and wonder, is there to accomplish this difference in ODI 11.
  Thank you.
  
  Published by: Michel 03/11/2010 17:10

  http://odiexperts.com/agent

• Two problems. New installation. (Question loading and certificate of the page).

  So, I have recently reinstalled FF, thinking I'd give it a try. And I immediately ran into two problems.

  The first of them being that facebook does not seem to work correctly at all. Attached image.
  The second is that I get a message of invalid certificate on Web sites, that I used most often. For example, I'll use the site Web of Halo Waypoint. Ran and owned by Microsoft/343 Industries. I do not get an option "Add expection" on these pages. Also attached image.

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Vista SP1 Installation 936330 question

  Hello

  I bought a HP Desktop used with Vista Business on it. Vista SP1 (KB936330) shows (two) installed and cancelled in 'history of the Windows Update.  The last time I tried to install SP1 a message stating that "this will take a few hours and your PC may restart several times" appears.  As soon as I started the Setup he quit smoking.

  I tried to solve the problem using the method described in the article, "Windows Vista SP1 (KB936330) issue", but it did not work.

  At this point I don't know if Vista SP1 has been installed or not - because he says that both cancelled and installed - as mentioned.

  Another point that may touch, is the PC has only either 7 on it.  I tried to update IE 9, but whenever an error message appears and I can't download it.

  Any help will be greatly appreciated!

  Terry

  Hello
  Thanks for posting your query to the Microsoft community. Sorry for the delay in responding. Before you install the Service Pack, I recommend you follow the steps in the section "before you begin" of this article and check if it

  help.

  You can also follow the suggestion of PA bear MS MVP of this thread and check.

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We're blad for help.