Installation CS2 Insert Disc 2

Similar Questions

• Programs of CS2 installs, error insert disc 2

  Lost my CS2 programs when Adobe has put an end to their server, was allowed to download replacements, but when trying to install, I hit a wall on disc 1, when he says to insert disk 2, cannot pass it, even if all the disks are in place even on computer, program files/Adobe. Help, please! Submit a ticket to support days ago and have not heard back.

  Yes the activation server is therefore more available for CS 2: you must install using download installation files.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Installation CS2 for download

  I'm installing CS2 as downloaded files, at the end of the first file it asks CD2. Even if all the three downloaded files are in the same folder, it is not the next file. My only options are ok or I stopped, ok don't ask again for the cd.

  Someone has ideas how to proceed otherwise that burn the files to disc?

  Alainbo this question has been discussed at http://forums.adobe.com/thread/1195856.  In particular:

  Extraction instructions

  If you receive a message to insert the disc two see the following extraction instructions:

  In the English version of the software, the file extracted to C:\Creative Suite\Adobe Creative Suite 2.0\ CreativeSuiteCS2Disc2.  CreativeSuiteCS2Disc1 and CreativeSuiteCS2Disc3 both extracted C:\Creative Suite CS2\Adobe Creative Suite 2.0\.

  Please copy the contents of the folder C:\Creative Suite\Adobe Creative Suite 2.0\ in the C:\Creative Suite CS2\Adobe Creative Suite 2.0\ folder and you will be is more prompted to insert disc two.

• Can I insert disc HARD 160 GB in Satellite U200-181

  Dear friends!
  If I insert disc HARD 160 GB laptop Toshiba U200-181?
  Version 3.40 BIOS

  Thank you!

  Hello

  Hmmm, comment of the snipe is not 100% good.
  If the size of the HARD drive is not supported BIOS does not recognize the HARD drive!

  I think you could use a HD up to 120 GB, but I'm not sure of the larger sizes.
  You should really examine it until you buy one.

• Recovery installation disk vs. disc.

  Hi all

  I have HP Pavilion a1509 PC with Windows XP SP3 OS.

  My hard drive crashed and had to replace it with a new one.

  I lost the installation for the Windows XP operating system disc. Is there a difference between the recovery disc and the installation of HP disc?

  Is Yes, where can I get the installation for OS Windows XP for HP disc.

  Help, please!

  Hello

  HP cannot send you namely XP installation CD but a set of disks installation disc shortly called set of recovery disks. All must conntain the OS (XP), all the drivers and applications on your computer. You can order from the following link (scroll down for other countries):

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• Pavilion DV6 will not play DVD, tells me to insert disc

  When I got my DV6 I could play DVDs. Last week, I burned a few DVDs. Today, I'm playing another DVD, but when I inserted the disc, files, I burned the last time appeared in Explorer instead of the movie. I deleted these files. Now, when I put the DVD in the drive I can hear it turn. But when I click on my DVD drive in Explorer, the DVD tray opens automatically and the message "Insert disc". I don't understand why I can't play movies more. ???

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

  my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

  Hey Lucky,

  You can try the steps in the follwoign and check if it helps.

  Method 1:

  You can try to rebuild the media player library, and then try to extract again

  This problem can occur if the media library is corrupt. Rebuild the library and check if this solves the problem.

  Follow these steps:

  a. exit Windows Media Player.

  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

  c. Select all files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Method 2:

  You can also try to change rip settings and check.

  For more information, you can consult the following article:

  Change settings for ripping

• Hard drive does not not on the laptop! 'Insert disc in drive D', disc already inside.

  It works fine throughout, but I went on the creation of a hot spare for my laptop computer and any burning, the drawer open and says disc "Insert blank cd in the drive" even if it already, to tried many disks. Tried other discs, games, etc, do not go or recognize a disc inside.

  When I go to computer-> DVD RW drive and double click on it says "insert disc in drive D".

  Tried almost all of the correction he things here http://windows.microsoft.com/en-US/windows7/search?q=vista%20cd%20dvd%20drive&p=1&prd=

  any help is appreciated!

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• I installed Adobe Creative Suite on an external drive. I want to upgrade to CS3, but the installation of CS3 disc wonder the CS4 master drive.

  I installed Adobe Creative Suite on an external drive. I want to upgrade to CS3, but the installation of CS3 disc wonder the CS4 master drive. I can also select the disc I want to move on. Anything wrong here?

  When you start the installation of your cs3 and enter your serial number for cs3, the installer should detect it is a update the serial number and you present a list of products (where you could have improved) eligible.

  Select the previous product (what you own) and you will be asked for the serial number of the previous product.

  Enter the correct number at the right time and to proceed with the installation.

• Message "Insert disc" DVR/RW

  My DVD RW drive use to work properly. I could burn CDs and I could look at the data on previously burnt discs. I was also able to read music CDs. Have not already watched the DVD on it. Now, nothing works. I get the following message-

  "Insert a disc.
  Please insert a disk into drive E ".

  The DVD/RW drive appears in my "My Computer" and is clickable. Once I have add the drive, the green bar state charges, but nothing happens. I can hear the disc spinning inside but no results. I tried a writable disc and one and regular music CD and disks I have photos stored on. Nothing has worked.

  I ran the microsoft fix for the two questions and he has not read or the other disk. I don't know what the problem is. I made a few other fixes and it says the drive exists and happens as update, but still does not. Device Manager says it's working properly. I tried to update the drivers, and it does not solve the problem. I tried a system restore, it did not work. I tried to uninstall the software, and let Vista rediscover after restarting and it did not work as there does not seem to be uninstalled when I told him to do it on the Device Manager. I also went the registry keys to check filters down and that no longer works. I am at a loss!

  Hello

  A CD/DVD cleaner 'could' help.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• In the Windows Installer box - insert Dell network Assistance

  original title: Windows Installer box.

  Windows Installer box - message says:

  "The feature you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the disc "Dell network Assistance.

  I don't know which disk i.e. - any ideas.

  Occurs when I try to open MS Word or something in the office.

  WORKED FINE YESTERDAY

  Help

  Hello

  ·         This only happens when you use Office applications?

  Try to reinstall network of Dell since the Dell software came with the computer and check if this is useful.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can I ignore installation CS2 if I upgrade to CS5.5?

  IHAVE CS2 and CS5.5 update discs. Now I have new PC with win8 and my old registrationd on CS2 no longer works. I have download all files for th CS2 yet once, installit with provided serial number and then move to cs5.5 or is there a way I directli this upgrade without even having to activate the CS2? I don't want to download CS2 all over again since I have it on disk.

  Thank you

  M:P

  Hi Michael,

  Have you tried to install the CS5.5 first? Once you install the product, ask you the previous serial version, and you can then enter the serial number CS2 and that should do the job.

  See you soon,.

  Michael Sharma

• MacBook pro mid-2009 can not insert disc in the drive

  I can't insert a floppy in the drive of my Macbook Pro mid-2009! It's a s if there is a disc already inside - something is it prevents insertion of entirely.

  I've tried several "cures" I found on the net - one of them worked for a short period but now the problem is back.

  The guys at the genius bar in an Apple store have seen this problem so often, they got some field tools rush this opening and get in and out drives. If who disobeys, they can take in the back and open it to fold the skin of the player, fitness and clear of the issue.

  You an appointment for an assessment is free, guaranteed, or rear. In general, if they can solve this problem in less than a quarter hour without spending coins, there is no charge.

• I HAVE INSTALLED THE AIR COMBAT SIMULATOR BUT WHEN I TRY TO RUN IT, IT SAYS INSERT DISC. WHEN I INSERT THE DISC IT USUALLY ALWAYS OPEN

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jewels38f,

  ·         What happens once you insert the disc (you get no error message)?

  ·         What version of Combat Flight Simulator you try to play?

  ·         What version of Windows is installed on your computer?

  ·         Have you tried the game from the disc itself?

  If you use Windows 7, then follow the suggestions below.

  Visit the link given below to ensure the compatibility of the version of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator

  Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.

  Check if this is useful.

  If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.

  To install the game in compatibility mode follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.