Installation easy vpn Cisco 871

Similar Questions

• Cisco easy VPN access Internet without Split Tunnel

  Hey guys

  IM wondering if anyone has a config that can help me get access to internet via an easy vpn tunnel on a cisco 877 router.

  Basically, we are traveling to be users able to use the internet through vpn, rather than using split tunneling. The reason for this is that we have several sites that are attached by lists of external IP access for some services.

  We hope that mobile users to interact with these sites through the central router and use external IP of access routers secure sites.

  I hope that makes sense. I know that we can use a proxy but we also use other services of bases no proxy on these sites, it would be rather routed direct access.

  Thank you

  Luke

  Hi Luke,.

  Please use the installation of the client VPN (complete tunnel) link below.

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bd0.PDF

  Note the useful message.

  Thank you

  Kasi

• Cisco easy VPN + loopback interface. static ip address for the client

  Good day people.

  I have a couple a question and answer on which I can't google for a period. BTW I maybe simly use bad aproach to choose keywords.

  Thus,.

  (1) is it possible to assign the same IP to the same customer every time that it authenticated, preferably without using DHCP? Definely im sure it is possible, but can't find match configuration examples (my camera's 1921 Cisco IOS 15.0.1).

  (2) is it possible to assign the dynamic crypto map to the loopback interface (to make EASY VPN Server accessible through two interfaces - maybe you recommend another approach instead?) - that I move the map workingcrypto of int phy loopback - I can not connect with reason "SA Phace1 policy proposal" not accepted

  Hello

  (1) you can attach to the same IP to the same username using RADIUS

  (2) If you have 2 outside interfaces

  Then, you would use

  mymap-address loop0 crypto card

  int gig0/0

  crypto mymap map

  int g0/1

  cryptp map mymap

  By doing so, the local address would actually be the loop0 but Cryptography card HAS to be applied on physical output interfaces

  See you soon

  OLivier

• Cannot access the internal network with Cisco easy vpn client RV320

  I have a cisco RV320 (firmware v1.1.1.06) and created a tunnel easy vpn (= split tunnel tunnel mode), then I installed the cisco client vpn v5.0.07.0290 in Windows 7 64 bit, I can connect to the vpn, but I do not see the other pc ping nor them, no idea?

  Thank you

  Hello

  1. is the firewall on the active Windows 7 computer? If so, please disable it

  2. can you check that you get a correct IP address in the range of the POOL of IP configured?

  3. When you perform the tracert command to access an internal server, it crosses the VPN¨?

  4. is the tunnel of split giving you access to internal IP subnets defined?

  5. on the RV320 you see the user connected and sending and receiving bytes?

  Don t forget to rate and score as correct the helpful post!

  David Castro,

  Kind regards

• Easy VPN server installation

  I have a Cisco 871 router that is connected to the internet. I want to leave a few remote VPN users in the office using the Cisco VPN Client. Currently, I can get the VPN Client to authenticate and connect. However, whenever I try something inside the private network ping I get a response from the external IP address of the router instead. The config is as it is now. If anyone can tell what I'm doing wrong, I would really appreciate it. Thank you!

  no service button

  tcp KeepAlive-component snap-in service

  a tcp-KeepAlive-quick service

  horodateurs service debug datetime localtime show-timezone msec

  Log service timestamps datetime localtime show-timezone msec

  encryption password service

  sequence numbers service

  !

  rtr-test hostname

  !

  boot-start-marker

  boot-end-marker

  !

  logging buffered debugging 51200

  recording console critical

  enable secret 5 xxxxxxxxx

  !

  AAA new-model

  !

  !

  AAA authentication login local userauth

  AAA authorization groupauth LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  PCTime-6 timezone clock

  PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00

  IP subnet zero

  no ip source route

  IP cef

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.0.1 192.168.0.99

  DHCP excluded-address IP 192.168.0.201 192.168.0.254

  !

  IP dhcp pool sdm-pool1

  import all

  network 192.168.0.0 255.255.255.0

  192.168.0.25 DNS server

  default router 192.168.0.1

  !

  !

  synwait-time of tcp IP 10

  no ip bootp Server

  IP domain name bfloan.com

  name-server IP 192.168.0.25

  property intellectual ssh time 60

  property intellectual ssh authentication-2 retries

  !

  !

  Crypto pki trustpoint TP-self-signed-3716545297

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3716545297

  revocation checking no

  rsakeypair TP-self-signed-3716545297

  !

  !

  username privilege 15 password xxxxxxxxxxx xxxxxxxx

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpngate

  XXXXXXX key

  DNS 192.168.0.25

  won the 192.168.0.25

  pool ippool

  ACL 105

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauth

  card crypto clientmap isakmp authorization list groupauth

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  Bridge IRB

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  Description $FW_OUTSIDE$ $ES_WAN$

  IP address 66.x.x.33 255.255.255.x

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  NAT outside IP

  IP virtual-reassembly

  route IP cache flow

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface Dot11Radio0

  no ip address

  !

  !

  interface Vlan1

  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$

  no ip address

  IP tcp adjust-mss 1452

  Bridge-Group 1

  !

  interface BVI1

  Description $ES_LAN$

  the IP 192.168.0.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1412

  !

  IP local pool ippool 192.168.100.1 192.168.100.25

  IP classless

  IP route 0.0.0.0 0.0.0.0 66.4.164.38

  !

  IP http server

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  overload of IP nat inside source list 100 interface FastEthernet4

  !

  recording of debug trap

  Access-list 100 category SDM_ACL = 2 Note

  access-list 100 permit ip 192.168.0.0 0.0.0.255 any

  access-list 105 allow ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255

  not run cdp

  !

  control plan

  !

  Bridge Protocol ieee 1

  1 channel ip bridge

  !

  Line con 0

  no activation of the modem

  telnet output transport

  line to 0

  telnet output transport

  line vty 0 4

  privilege level 15

  transport input telnet ssh

  Your configuration is good, but you must do the following:

  no access list 100 didn't allow ip 192.168.0.0 0.0.0.255 any

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255

  access-list 100 permit ip 192.168.0.0 0.0.0.255 any

  access-list 105 allow ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255

  Please rate if this helps

• Cisco 831 - easy VPN server

  Hello

  I am trying to create an easy VPN server on Cisco 831. When I "test" the easy VPN he said that it tested successfully, but when I try to VPN in the router of the built in Windows XP VPN client, I'm unable to connect.

  Does anyone have recommendations for how to configure easy VPN? I basically just selected all the default options. I was not able to find tutorials in the Cisco online documentation.

  Do I need to have the Cisco VPN client to connect to the Cisco router?

  Other thoughts?

  Your IP address pool you are trying to assign to remote users is part of your local network, which is not the best way to assign the ip address to the VPN Clients, and I've seen a lot of problems in the past were route it not forwards the packets to the client. This allows you to change the POOL of something other than your LAN. E.g. 192.168.1.0/24.

  Also, make sure that you re - configure your 102 ACL accordingly.

  Once you make changes, try to connect again and let me know how it goes.

  Kind regards

  Arul

  * Please note all useful messages *.

• VPN site to Site on both ends using Cisco 871

  I would like to configure VPN Site to Site using the Cisco 871 templates at both ends, but a hard time to set it up. Can someone tell me how to do or if you know of a link that may help me set up as soon as possible?

  I can learn it, but it's time that banned me in the implementation. The other end is already configured to provide Internet access to all users.

  Tom,

  ########################################################################################

  Router 1 VPN config:

  Internal = 10.0.0.0/24
  Public = 196.1.161.65

  access-list 101 permit ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255

  access-list 102 deny ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255
  access-list 102 permit ip 10.0.0.0 0.0.0.255 any

  IP nat inside source list 102 in interface (check the name of the external interface) overload

  crypto ISAKMP policy 10
  3des encryption
  sha hash
  Group 2

  ISAKMP crypto key cisco123 address 196.1.161.66

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  MYmap 10 ipsec-isakmp crypto map
  defined by peer 196.1.161.66
  Set transform-set RIGHT
  match address 101

  interface (check the name of the interface inside)
  IP nat inside

  interface (check the name of the external interface)
  NAT outside IP
  crypto mymap map

  ########################################################################################

  Router 2 VPN config:

  Internal = 10.193.12.0/22
  Public = 196.1.161.66

  access-list 101 permit ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255

  access-list 102 deny ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255
  access-list 102 permit ip 10.193.12.0 0.0.3.255 all

  IP nat inside source list 102 in the fast4 interface overload

  crypto ISAKMP policy 10
  3des encryption
  sha hash
  Group 2

  ISAKMP crypto key cisco123 address 196.1.161.65

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  MYmap 10 ipsec-isakmp crypto map
  defined by peer 196.1.161.65
  Set transform-set RIGHT
  match address 101

  interface vlan1
  IP nat inside

  fast4 interface
  NAT outside IP
  crypto mymap map

  ########################################################################################

  The above is an example of configuration.
  It is always recommended to change the pre shared key to something else.

  Federico.

• Easy vpn server issues of Cisco 800 series.

  Hello.

  I want to deploy the easy vpn server on cisco 876 and 877 10 routers and access from a remote location (company headquarters). When I leave the firewall of the router off the vpn server works. When I turn it on it doesn't.

  Although I allow all traffic to my ip for example 80.76.61.158 I can't access the vpn server.

  I tried a place to let the firewall off and it worked fine.

  I use SDM to configure the vpn server. Any ideas what I can do with the cause of firewall I really can't leave it "open."

  Thanks in advance.

  It would be a good idea to paste the configuration of the VPN server to the firewall.

  Kind regards

  Kamal

• PlayBook & cisco Easy VPN Server 831

  I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook.  Looking at the console of the router I can see Debugging but don't know what it means.  I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated.  Thank you very much.

  Current configuration: 2574 bytes
  !
  version 12.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
  enable password xxxx
  !
  username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
  username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA - the id of the joint session
  IP subnet zero
  no ip Routing
  !
  !
  audit of IP notify Journal
  Max-events of po verification IP 100
  No ftp server enable write
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP xauth timeout 15 crypto

  !
  ISAKMP crypto client configuration group ciscogroup
  (deleted) 0 key
  DNS 172.16.60.246 172.16.60.237
  pool SDM_POOL_3
  ACL 100
  Save-password
  include-local-lan
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  interface Ethernet0
  IP 172.16.60.241 255.255.255.0
  IP nat inside
  no ip route cache
  !
  interface Ethernet1
  DHCP IP address
  NAT outside IP
  no ip route cache
  automatic duplex
  map SDM_CMAP_1 crypto
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet2
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet3
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet4
  no ip address
  automatic duplex
  automatic speed
  !
  local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
  pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
  local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
  IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
  IP classless
  !
  IP http server
  no ip http secure server
  !
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 172.16.60.0 0.0.0.255
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 172.16.60.0 0.0.0.255 any
  public RO SNMP-server community
  Enable SNMP-Server intercepts ATS
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 120 0
  password xxxxx
  length 0
  !
  max-task-time 5000 Planner
  !
  end

  Stace,

  *Mar  1 06:40:15.258: ISAKMP: transform 1, ESP_AES
  *Mar  1 06:40:15.258: ISAKMP:   attributes in transform:
  *Mar  1 06:40:15.262: ISAKMP:      SA life type in seconds
  *Mar  1 06:40:15.262: ISAKMP:      SA life duration (basic) of 10800
  *Mar  1 06:40:15.262: ISAKMP:      encaps is 61443
  *Mar  1 06:40:15.262: ISAKMP:      key length is 256
  *Mar  1 06:40:15.262: ISAKMP:      authenticator is HMAC-SHA
  *Mar  1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
  *Mar  1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
  *Mar  1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
  

  The other end offers AES 256 and SHA IPSec transform set.

  While you have configured:

  crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

  Suggestion:

  Add a new set of transofrm and apply it under crypto map.

  HTH,

  Marcin

• Router Cisco 871 as a VPN server

  Hello!

  I have a Cisco 871 router which I want to implement a VPN (PPTP) server at home, so that I could connect to it from outside (from an Internet café, for example).

  All I need is to be able to use my IP of the home across the world just by connecting to the VPN through PPTP. The router would be the only thing connected to the internet in my house and it is not all of the devices connected to the router. Remote access to my IP is all I need.

  The problem is that I have no idea how to do that.

  So I would really appreciate if someone could help me with this,

  Thank you!

  Read the below URL

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080ab7073.shtml

  HTH >

• Pass Cisco 871 and VPN to the SBS 2008 Server

  to precede the questions below, I'm responsible for COMPUTING internal with several years of site / offsite support. I also have very limited knowledge of the inner workings of a Cisco device. That said, I've beaten my head against a wall, trying to configure my router Cisco 871 to allow access to our internal server of SBS 2008 VPN hosting services. I think I, and properly configured the SBS 2008 Server.

  I use advanced IP services, version 12.4 (4) T7

  Here is the \windows\system32\conifg\system running

  Building configuration...

  Current configuration: 9414 bytes
  !
  version 12.4
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname yourname
  !
  boot-start-marker
  boot-end-marker
  !
  Security of authentication failure rate 3 log
  Passwords security min-length 6
  logging buffered debugging 51200
  recording console critical
  enable secret 5 *.

  !
  No aaa new-model
  !
  resources policy
  !
  PCTime-5 timezone clock
  PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
  IP subnet zero
  no ip source route
  IP cef
  !
  !
  !
  !
  synwait-time of tcp IP 10
  no ip bootp Server
  "yourdomain.com" of the IP domain name
  name of the IP-server 65.24.0.168
  name of the IP-server 65.24.0.196
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  inspect the IP name DEFAULT100 appfw DEFAULT100
  inspect the IP name DEFAULT100 cuseeme
  inspect the IP name DEFAULT100 ftp
  inspect the IP h323 DEFAULT100 name
  inspect the IP icmp DEFAULT100 name
  inspect the IP name DEFAULT100 netshow
  inspect the IP rcmd DEFAULT100 name
  inspect the IP name DEFAULT100 realaudio
  inspect the name DEFAULT100 rtsp IP
  inspect the IP name DEFAULT100 sqlnet
  inspect the name DEFAULT100 streamworks IP
  inspect the name DEFAULT100 tftp IP
  inspect the IP udp DEFAULT100 name
  inspect the name DEFAULT100 vdolive IP
  inspect the name DEFAULT100 http urlfilter IP
  inspect the IP router-traffic tcp name DEFAULT100
  inspect the IP name DEFAULT100 https
  inspect the IP dns DEFAULT100 name
  urlfilter IP interface-source FastEthernet4
  property intellectual urlfilter allow mode on
  urlfilter exclusive-area IP Deny. Facebook.com
  refuse the urlfilter exclusive-domain IP. spicetv.com
  refuse the urlfilter exclusive-domain IP. AddictingGames.com
  urlfilter exclusive-area IP Deny. Disney.com
  urlfilter exclusive-area IP Deny. Fest
  refuse the urlfilter exclusive-domain IP. freeonlinegames.com
  refuse the urlfilter exclusive-domain IP. hallpass.com
  urlfilter exclusive-area IP Deny. CollegeHumor.com
  refuse the urlfilter exclusive-domain IP. benmaller.com
  refuse the urlfilter exclusive-domain IP. gamegecko.com
  refuse the urlfilter exclusive-domain IP. ArmorGames.com
  urlfilter exclusive-area IP Deny. MySpace.com
  refuse the urlfilter exclusive-domain IP. Webkinz.com
  refuse the urlfilter exclusive-domain IP. playnow3dgames.com
  refuse the urlfilter exclusive-domain IP. ringtonemecca.com
  refuse the urlfilter exclusive-domain IP. smashingames.com
  urlfilter exclusive-area IP Deny. Playboy.com
  refuse the urlfilter exclusive-domain IP. pokemoncrater.com
  refuse the urlfilter exclusive-domain IP. freshnewgames.com
  refuse the urlfilter exclusive-domain IP. Toontown.com
  urlfilter exclusive-area IP Deny .online-Funny - Games.com
  urlfilter exclusive-area IP Deny. ClubPenguin.com
  refuse the urlfilter exclusive-domain IP. hollywoodtuna.com
  refuse the urlfilter exclusive-domain IP. andkon.com
  urlfilter exclusive-area IP Deny. rivals.com
  refuse the urlfilter exclusive-domain IP. moregamers.com
  !
  policy-name appfw DEFAULT100
  http request
  port-bad use p2p action reset alarm
  port-abuse im action reset alarm
  Yahoo im application
  default action reset service
  service-chat action reset
  Server deny name scs.msg.yahoo.com
  Server deny name scsa.msg.yahoo.com
  Server deny name scsb.msg.yahoo.com
  Server deny name scsc.msg.yahoo.com
  Server deny name scsd.msg.yahoo.com
  Server deny name messenger.yahoo.com
  Server deny name cs16.msg.dcn.yahoo.com
  Server deny name cs19.msg.dcn.yahoo.com
  Server deny name cs42.msg.dcn.yahoo.com
  Server deny name cs53.msg.dcn.yahoo.com
  Server deny name cs54.msg.dcn.yahoo.com
  Server deny name ads1.vip.scd.yahoo.com
  Server deny name radio1.launch.vip.dal.yahoo.com
  Server deny name in1.msg.vip.re2.yahoo.com
  Server deny name data1.my.vip.sc5.yahoo.com
  Server deny name address1.pim.vip.mud.yahoo.com
  Server deny name edit.messenger.yahoo.com
  Server deny name http.pager.yahoo.com
  Server deny name privacy.yahoo.com
  Server deny name csa.yahoo.com
  Server deny name csb.yahoo.com
  Server deny name csc.yahoo.com
  audit stop trail
  aol im application
  default action reset service
  service-chat action reset
  Server deny name login.oscar.aol.com
  Server deny name toc.oscar.aol.com
  Server deny name oam - d09a.blue.aol.com
  audit stop trail
  !
  !
  Crypto pki trustpoint TP-self-signed-1955428496
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1955428496
  revocation checking no
  rsakeypair TP-self-signed-1955428496
  !
  !
  TP-self-signed-1955428496 crypto pki certificate chain
  certificate self-signed 01
  308201B 8 A0030201 02020101 3082024F 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31393535 34323834 6174652D 3936301E 170 3032 30333031 30303035
  33315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39353534 65642D
  32383439 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100CB6B E980F044 5FFD1DAE CBD35DE8 E3BE2592 DF0B2882 2F522195 4583FA03
  40F4DAC6 CEAD479F A92607D4 1 B 033714 51C3A84D EA837959 F5FC6508 4D71F8E6
  5B124BB3 31F0499F B0E871DB AF354991 7D45F180 5D8EE435 77C8455D 2E46DE46
  67791F49 44407497 DD911CB7 593E121A 0892DF33 3234CF19 B2AE0FFD 36A640DC
  2 010001 HAS 3 990203 AND 77307530 1 130101 FF040530 030101FF 30220603 0F060355 D
  1104 1B 301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D 551D
  301F0603 C 551 2304 18301680 145566 4581F9CD 7 5F1A49FB 49AC9EC4 678908FF
  2A301D06 04160414 5566 745 81F9CD5F 1A49FB49 AC9EC467 8908FF2A 03551D0E
  300 D 0609 2A 864886 818100B 3 04050003 903F5FF8 A2199E9E EA8CDA5D F70D0101
  60B2E125 AA3E511A C312CC4F 0130563F 28D3C813 99022966 664D52FA AB1AA0EE
  9A5C4823 6B19EAB1 7ACDA55F 6CEC4F83 5292 HAS 867 BFC65DAD A2391400 DA12860B
  5A 523033 E6128892 B9BE68E9 73BF159A 28D47EA7 76E19CC9 59576CF0 AF3DDFD1
  3CCF96FF EB5EB4C9 08366F8F FEC944CA 248AC7
  quit smoking
  secret of username admin privilege 15 5 *.

  !
  !
  Policy-map sdmappfwp2p_DEFAULT100
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  Description $$$ FW_OUTSIDE$ $ES_WAN$ ETH - WAN
  address IP dhcp client id FastEthernet4
  IP access-group 101 in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  inspect the DEFAULT100 over IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  sdmappfwp2p_DEFAULT100 of service-policy input
  out of service-policy sdmappfwp2p_DEFAULT100
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW $ES_LAN$ $FW_INSIDE$
  the IP 192.168.0.1 255.255.255.0
  IP access-group 100 to
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly
  route IP cache flow
  IP tcp adjust-mss 1452
  !
  IP classless
  !
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  the IP nat inside source 1 list the interface FastEthernet4 overload
  IP nat inside source static tcp 192.168.0.100 1723 1723 interface FastEthernet4
  IP nat inside source static tcp 192.168.0.100 25 25 FastEthernet4 interface
  IP nat inside source static tcp interface 192.168.0.100 80 80 FastEthernet4
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 443 443
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 987 987
  !
  recording of debug trap
  Note access-list 1 INSIDE_IF = Vlan1
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 192.168.0.0 0.0.0.255
  access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
  Access-list 100 = 1 SDM_ACL category note
  access-list 100 deny ip 255.255.255.255 host everything
  access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
  access ip-list 100 permit a whole
  access list 101 remark self-generated by the configuration of the firewall Cisco SDM Express
  Note access-list 101 = 1 SDM_ACL category
  access-list 101 permit tcp any any eq 1723
  access-list 101 permit tcp any any eq 987
  access-list 101 permit tcp any any eq 443
  access-list 101 permit tcp any any eq www
  access-list 101 permit tcp any any eq smtp
  access-list 101 permit udp host 65.24.0.169 eq field all
  access-list 101 permit udp host 65.24.0.168 eq field all
  access-list 101 permit udp host 24.29.1.219 eq field all
  access-list 101 permit udp host 24.29.1.218 eq field all
  access-list 101 permit udp any eq bootps any eq bootpc
  access-list 101 deny ip 192.168.0.0 0.0.0.255 any
  access-list 101 permit icmp any any echo response
  access-list 101 permit icmp any one time exceed
  access-list 101 permit everything all unreachable icmp
  access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 172.16.0.0 0.15.255.255 all
  access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
  access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 255.255.255.255 host everything
  access-list 101 deny ip any one
  not run cdp
  !
  !
  control plan
  !
  connection of the banner ^ CCCCCAuthorized access only!
  Unplug IMMEDIATELY if you are not an authorized user. ^ C
  !
  Line con 0
  local connection
  no activation of the modem
  telnet output transport
  line to 0
  local connection
  telnet output transport
  line vty 0 4
  privilege level 15
  local connection
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  end

  All that top has been configured with the SDM interface. I hope someone here can take a look at this and see what my question is, and why I can't connect through the router.

  All thanks in advance to help me with this.

  Jason

  Based on your description, I am assuming that you are trying the traffic PPTP passthrough via the router 871, and the PPTP Protocol ends on your SBS 2008 Server.

  If this is the correct assumption, PPTP uses 2 protocols: TCP/1723 and GRE. Your configuration only allow TCP/1723, but not the GRE protocol.

  On 101 ACL, you must add "allow accord any any" before the declarations of refusal:

  101 extended IP access list

  1 allow any one

  I guess that the PPTP control connection works fine? Are you able to telnet to the router outside the ip address of the interface on port 1723?

• IOS Easy VPN Server / Radius attributes

  Hello

  I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.

  It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.

  The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.

  How can I solve this problem?

  You will find the relevant parts of the configuration and a RADIUS "deb" below.

  Kind regards

  Christian

  AAA - password password:

  AAA authentication calls username username:

  RADIUS AAA authentication login local users group

  RADIUS AAA authorization network default local group

  crypto ISAKMP policy 1

  Group 2

  !

  crypto ISAKMP policy 3

  md5 hash

  preshared authentication

  Group 2

  ISAKMP crypto identity hostname

  !

  ISAKMP crypto client configuration group kh_vpn

  mypreshared key

  pool mypool

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac shades

  !

  mode crypto dynamic-map 1

  shades of transform-set Set

  !

  users list card crypto mode client authentication

  card crypto isakmp authorization list by default mode

  card crypto client mode configuration address respond

  dynamic mode 1-isakmp ipsec crypto map mode

  !

  interface FastEthernet0/1

  IP 192.168.100.41 255.255.255.248

  crypto map mode

  !

  IP local pool mypool 172.16.0.2 172.16.0.10!

  Server RADIUS attribute 8 include-in-access-req

  RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX

  RADIUS server authorization allowed missing Type of service

  deb RADIUS #.

  00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:28: RADIUS: ustruct sharecount = 2

  00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  4, len 73

  00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96

  68

  00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:28: RADIUS: username [1] 10 "vpnuser1".

  00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:28: RADIUS: User-Password [2] 18 *.

  00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l

  in 108

  00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6

  A4

  00:03:28: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:28: RADIUS: Tunnel-Password [69] 21 *.

  00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0

  00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5

  00:03:28: RADIUS: [25] the class 37

  00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F

  /vpnus]

  00:03:28: RADIUS: 65 72 31 [1]

  00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data

  00:03:29: RADIUS: authentication for data of the author

  00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:29: RADIUS: ustruct sharecount = 3

  00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  5, len 77

  00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60

  E3

  00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:29: RADIUS: username [1] 8 'kh_vpn '.

  00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:29: RADIUS: User-Password [2] 18 *.

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l

  in 94

  00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23

  AF

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:29: RADIUS: Tunnel-Password [69] 21 *.

  00:03:29: RADIUS: [25] class 35

  00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a

  [/ kh_vp]

  00:03:29: RADIUS: 6 [n]

  00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data

  Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.

  On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.

  Yes, messy, but just try to provide a solution for you.

• Easy VPN Hardware instead of easy VPN software

  Hello world

  I need configuration for the VPN routers in Cisco connect 30 branch offices to the main office using Internet links

  connection to the Main Office have a static public IP address but the problem is that the remote Branches have dynamic public IP that changes every time when you reboot the ADSL router and I can't buy public static IP for each branch to Point - to-Point VPN and I don't want to use the easy VPN software in remote branches what I want is the use of the router in remote branches instead of the easy VPN software

  Please, what is the order of configuration that make the work of road Cisco cisco easy VPN software.

  Thank you

  Hello

  Instead of having to use the IPsec client software on computers, you can use a router IOS or ASA as a material EzVPN client.

  Only some models can be used as clients for example IOS 831 s, 871 s (small) or ASA 5505.

  An example configuration:

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bd0.PDF

  Federico.

• Easy vpn remote

  I have a router 2611 with ios:c2600 - I - mz.120 - 10, DRAM/FLASH is 26624 K / 6144 K

  and the compact flash is 4966520.

  It would support the easy vpn remote feature? If this isn't the case, what IOS/DRAM/FLASH might be appropriate?

  Hello

  Use feature Navigator find IOS appropriate for different platforms:

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  HTH

  Sangaré

• Easy VPN between two ASA 9.5 - Split tunnel does not

  Hi guys,.

  We have set up a site to site vpn using easy configuration vpn between ver 9.5 race (1) two ASA. The tunnels are up and ping is reached between sites. I also configured split tunnel for internet traffic under the overall strategy of the ASA easy vpn server. But for some unknown reason all the customer same internet traffic is sent to the primary site. I have configured NAT to relieve on the side of server and client-side. Please advise if no limitation so that the installation program.

  Thank you and best regards,

  Arjun T P

  I have the same question and open a support case.

  It's a bug in the software 9.5.1. See the bug: CSCuw22886