Easy VPN Hardware instead of easy VPN software
Hello world
I need configuration for the VPN routers in Cisco connect 30 branch offices to the main office using Internet links
connection to the Main Office have a static public IP address but the problem is that the remote Branches have dynamic public IP that changes every time when you reboot the ADSL router and I can't buy public static IP for each branch to Point - to-Point VPN and I don't want to use the easy VPN software in remote branches what I want is the use of the router in remote branches instead of the easy VPN software
Please, what is the order of configuration that make the work of road Cisco cisco easy VPN software.
Thank you
Hello
Instead of having to use the IPsec client software on computers, you can use a router IOS or ASA as a material EzVPN client.
Only some models can be used as clients for example IOS 831 s, 871 s (small) or ASA 5505.
An example configuration:
Federico.
Tags: Cisco Security
Similar Questions
-
Hello!
Could someone tell me where I can download the VPN 3002 version 4.0 software? Thanks in advance.
Bercy
http://www.Cisco.com/cgi-bin/tablebuild.pl/vpn3000-3DES
You will need a CCO login id.
-
Dear all,
I am newbie to firepower.
My client uses ASA 5512-X WITHOUT firepower, they want to use something like function UTM.
I have googled and find the firepower may be good choice.
But I didn't not firepower is hardware modules? or software? or I have to buy an additional license?
THX
Hello team,
You can integrate ASA with firepower. Firepower of the hardware and software modules are available. You can integrate the power of light software with ASA 5512.To module manage the fire power modules, you can use Firesight Center (virtual and hardware) management. To manage the power modules of fire, which you need a minimum of Protection and control of license and you need to buy separately to the Cisco team the global license.
Here are some links for reference.
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...
http://www.Cisco.com/c/en/us/TD/docs/security/firesight/5407/Relnotes/fi...
http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/firepower-mo...
Rate and correct mark if the post will help you
Concerning
Jetsy
-
Please provide subscription price for the area of Bangladesh or call me on * deleted phone number *.
Hey KumarPatel,
Please reach out to the Microsoft Dynamics community for that matter. The link below will take you to their CRM forum:
Microsoft Dynamics - CRM -
Running XP PRO with SP3 and the latest updates as of 12/14/10.
Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found. Neither disks driver with devices or of are available on the Web sites of the companies.
I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.
However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.
In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.
I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices. I uninstalled the unknown devices in Device Manager and do it again, but no change.
Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.
Hi pennybrown,
Follow the steps below and check, if it helps:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756
To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:
a. Click Start, click Run, type regedit and then click OK.
b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB
c. on the Edit menu, point to new, and then click DWORD.
d. type DisableSelectiveSuspend, and then press ENTER.
e. in the Edit menu, click on change.
f. type 1 and then click OK.
Note: This setting affects all USB host controller drivers in the system.
If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem with the Roxio Easy CD & DVD Burning software
I replaced the DVD drive. After that when I try to open Easy CD * software burning DVD in my computer appears a message as follows "all your drives are set to disabled. On this operating system, in order to start easy CD & DVBD burning house you have to physically remove your disks or activate at least one of them". I checked the DVD drive in Device Manager and it says it's working properly. I can listen to music and watch video DVDs on the DVD player. The software stops to this message.
Since the optical drive is working properly, but not detected / issues only in the Roxio software, please contact Roxio support for assistance.
-
Configuration Linksys LTR214 VPN
Sorry to ask a stupid question, but how do I do on the side of the Modem cable to configure a VPN? I had setup a VPN software but could support only a single connection; I bought this unit and you want to set up iit upward to access my network remotely. It is the same that previously, only enter the IP address of the LTR214 instead of the host computer? Should I activate/install the Open VPN or options easy VPN on the router? I would have rather just several connections connect to the use of VPN, that I couldn't do with the Modem to hust. THX in advance D Miller
You must cancel the bridge configuration you had before the switch to the DMZ.
-
Hello
I would like to know if CISCO 857 allows customers of Cisco VPN remote apart from site to site VPN software. I have heard that all cable cisco VPN devices allow connections to cisco VPN client software, is it true?
Thanks a lot for your help
Juan Manuel
Juan,
Let me explain a little further in order to clarify some of the terminology used, which could lead to confusion.
Router Cisco VPN may terminate the following types of tunnels.
Lan to Lan tunnels has.
b. dynamic tunnels of Lan to Lan
c. connections from VPN clients
d. ends for easy VPN clients
a & b are very similar
c & d are very similar
except - option c uses VPN (software) clients installed on the PC or MAC systems
Option d, material uses to connect to the IOS routers. You can use a router or a PIX firewall or a 3002 or ASA to connect to the Cisco router that would act as an IOS Easy VPN server. But the device to connect to the easy VPN server is called an easy VPN client.
Hope that explains the terminology a little more in detail.
To answer your question, safety feature Easy VPN client and server support.
And what you're trying to accomplish is option c. Thus, security feature option should work well for you.
Hope that explains your queries.
The rate of this post, if that helps!
Thank you
Gilbert
-
Wondering if anyone new of a workaround for the connection to a VPN with a 64 bit OS. According to Cisco and another VPN software/hardware websites are aware, intend to make this a reality. My only option now is to distance in another box with 32 bits.
any comment is appreciated
Tim
HP-Pavilion a6645f
AMD Athlon 64 X 2 4850e
Microsoft Windows Vista (6.0) Home Premium Edition Service Pack 1 (Build 6001)
DDR2, PC2-6400 (400 MHz), 2048 MB, Samsung
DDR2, PC2-6400 (400 MHz), 1024 MB, Hyundai Electronics
DDR2, PC2-6400 (400 MHz), 1024 MB, Hyundai Electronics
DDR2, PC2-6400 (400 MHz), 1024 MB, Hyundai Electronics
Version of DirectX 10.0Message edited by twjames on 11/26/2008 20:34Use the Cisco AnyConnect client. The former client is "legacy" that is why Cisco has not updated it for 64-bit.
http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect21/release/notes/anyconnect21.html
Look at the table under the heading "requirements". -
Cannot open an L2TP VPN tunnel behind a router 806.
This is the scenario:
My ISP provider provides pppoE.
When I connect a PC directly to the ADSL modem, I can open my L2TP VPN and VPN works fine and I am able to navigate.
When I connect the PC behind 806, I get a private pool in 806 IP and I am able to navigate, but PC, I open my VPN L2TP software utility (same as before) and cannot open the VPN.
Could you please tell me what config I shoul put in router to open the tunnel of 806 instead of op VPN software utility? The difference is that now 806 global IP gets rather od PC.
So I know now tunnel should be open from the router, but I Don t know what I have lines shlould Add.
Help, please!
I thinkl you want is VPN passthrough, the answer to that is the version of the IOS, I think IOS version 12.2 and allows VPN Passthru especially. There is no other configuration required just to 12.2 or above
-
How to move the ASA of IPSEC VPN via UDP to TCP
I have a client who has a remote desktop with 2 PCs than VPN in to their location of HQ. Previously, two computers where in different places now that they are in the same place. Both PC's are able to successfully establish a VPN connection to the CA by using the Version of the Client VPN Cisco 5.0.07.0290, but only 1 system actually passes the traffic and is able to access the resources at Headquarters.
I asked another engineer, and they said ' you must configure IPSEC over TCP or use Anyconnect to have multiple clients behind the same PAT' public ed remote ip address... ". ». I would go with IPSEC for TCP connection, so I won't have to uninstall the old client and go through the process of installing the AnyConnect client. Here is the configuration of the ASA 5505 thanks in advance for any help.
CLIENTASA # sh run
: Saved
:
ASA Version 7.2 (4)
!
hostname CLIENTASA
domain client.local
activate 72LucMgVuxp5I3Ox encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x where x.x.x.x
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
DNS server-group DefaultDNS
domain client.local
standard SPLIT-TUNNEL access list permit 192.168.1.0 255.255.255.0
outside_in list extended access permit tcp any any eq smtp
outside_in list extended access permit tcp any any eq www
outside_in list extended access permitted tcp everything any https eq
access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 10.99.99.0 255.255.255.0
pager lines 24
Enable logging
recording of debug console
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
pool local IP VPN-10.99.99.100 - 10.99.99.200
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 523.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
public static tcp (indoor, outdoor) interface www 192.168.1.2 netmask 255.255.255.255 www
public static tcp (indoor, outdoor) interface https 192.168.1.2 netmask 255.255.255.255 https
public static tcp (indoor, outdoor) interface smtp 192.168.1.2 netmask 255.255.255.255 smtp
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp - esp-md5-hmac
Crypto dynamic-map VPNDYN 1 set transform-set esp-3des
vpn ipsec dynamic VPNDYN 65535-isakmp crypto map
vpn outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 100
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 0.0.0.0 0.0.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
dhcpd dns 192.168.1.2
dhcpd outside auto_config
!
des-sha1 encryption SSL rc4 - md5
VPN-POLICY group policy interns
attributes of VPN-POLICY-group policy
value of server DNS 192.16.1.2
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value of SPLIT TUNNEL
admin PWpqnmc2BqJP9Qrb encrypted privilege 15 password username
password encrypted vpn2 ZBNuNQsIyyMGbOB2 user name
username vpn3 encrypted password 15c4LrPNccaj1Ufr
vpn1 fsQgwXwSLokX6hEU encrypted password username
tunnel-group CLIENTVPN type ipsec-ra
attributes global-tunnel-group CLIENTVPN
address VPN-POOL pool
Group Policy - by default-VPN-POLICY
IPSec-attributes tunnel-group CLIENTVPN
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:41bd95c164a63bb26b01c109ab1bd68a
: end
CLIENTASA #.
Hello
You can try adding
Crypto isakmp nat-traversal 30
And test connections
I think that you need to add to use the TCP protocol
Crypto isakmp ipsec-over-tcp 10000
You will also need to change the Transparent tunnel setting on the profile of Client VPN software to use TCP instead of option of NAT/PAT.
-Jouni
-
Rejecting the VPN clients by version
Is it possible that I can refuse access customers by their version which they run? Can someone send me a link on how I could do this?
Thank you
Dwane
Dwane,
How are you? I think that's what you're looking for:
~~~~~~~~~~~~~~~~
ustomers Type & Version limiting build rules to allow or deny VPN Clients according to their type and software version. Build these rules exactly, using the formats, abbreviations and other specifications of rule below.
Build rules in the format p [ermit] /d [eny]:, for example, d VPN 3002: 3.6*.
The * character is a wildcard character. You can use it several times to each rule. For example:
refuse *: 3.6* = deny all clients running software version 3.6 x.
Use a separate line for each rule.
Rules of order of priority. The first rule that matches is the rule that applies. If a rule later contradicted, the system ignores. If you set all the rules, all connections are allowed.
When a customer matches any of the rules, the connection is refused. This means that if you set a deny rule, you must also set at least an allow rule, or all connections are refused.
For software and hardware customers, customer type and software version must match their appearance (non-case sensitive) in the monitoring | Screen sessions, including spaces. We recommend that you copy and paste from this screen to it.
"N/a" for the type or version to identify the client sends no information. For example: n permit / a:n / a = allow any client who does not send the client, type, and version.
You can use a total of 255 characters for the rules. The line break between rules using two characters. To keep the characters, use p for permits and d to deny. Eliminate the spaces except as required for the type of client and the version. You don't need a space before or after the colon (:)).
Configuration mode checkbox to use Configuration Mode with clients IPSec (also known as the method of setting up ISAKMP or Transaction of Configuration). This option Exchange with the client configuration settings while negotiating SAs. If you check this box, the settings of Configuration of Mode; otherwise, ignore them. The box is checked by default.
To use the split tunneling, you must check this box.
If you checked L2TP over IPSec as the Tunneling protocols, do not check this box.
~~~~~~~~~~~~~~~~~
Please see the link below, you will need to have 4.7 running on your CVPN:
My two cents,
Frank
-
C1841 without the BUILD - IN Module, Bill VPN is a VPN MODULE?
Hello
Yesterday, that I just got a new router found on eBay.
When I boot it I see 2 FastEthernet Interfaces (this is normal and I see them) BUT it also shows me 1 Module of virtual private network (VPN).
Before I open this new router I try something like:
Material SH
SH crypto multicylindres
HS cry engine Accelerator stat
Here below you have the results:
I opened the ROUTER and I see:
NO ADDITIONAL MEMORY
NO VPN MODULE
Did you do something with a built-in CISCO VPN module
Thanks in advance for your help
Best regards
Didier
Router hardware #sh
Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (24) T1, VERSION of the SOFTWARE (fc3)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Updated Saturday 19 June 09 14:00 by prod_rel_team
ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)
The availability of router is 9 hours, 47 minutes
System to regain the power ROM
System image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin".
This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.
A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html
If you need assistance please contact us by mail at
Cisco 1841 (revision 7.0) with 118784K / 12288K bytes of memory.
Card processor ID FCZ1217905C
2 FastEthernet interfaces
1 module of virtual private network (VPN)
Configuration of DRAM is 64 bits wide with disabled parity.
191K bytes of NVRAM memory.
250880K bytes of ATA CompactFlash (read/write)
Configuration register is 0 x 3922
Router #.
Router #sh crypto multicylindres
crypto engine name: virtual private network (VPN) Module
crypto engine type: hardware
Status: enabled
Geographical area: 0 on board
Name of product: edge-VPN
HW Version: 1.0
Compression: Yes
A: Yes
3 a: Yes
AES - CBC: Yes (128,192,256)
AES CNTR: No.
Maximum length of the buffer: 4096
Index maximum DH: 0000
Maximum ITS index: 0000
Maximum fluidity index: 0300
The maximum size of the RSA key: 0000
version of crypto lib: 20.0.0
engine crypto in the slot: 0
platform: hardware VPN Accelerator
version of crypto lib: 20.0.0
Router #sh cry engine Accelerator stat
Device: FPGA
Location: on board: 0
: Statistics for device encryption since the last clear
counters 35534 seconds ago
68607 68607 out packages packages
49819692 bytes in 50341181 bytes on
1 paks/s to 1 output paks/s
11 Kbps in 11 Kbits/sec out
29298 decrypted packets 39309 encrypted packets
4074464 bytes before decipher 45745228 encrypted bytes
2537109 bytes decrypted 47804072 bytes after encrypt
0 0 packets compressed decompressed packets
0 bytes before Dang 0 bytes before comp
0 bytes after Dang 0 bytes after model
0 packets bypass decompression 0 by-pass compressor packages
Derivation of 0 bytes 0 bytes decompression work around compressi
0 packets not unzip 0 uncompressed packages
0 bytes not decompressed 0 bytes not compressed
1.0:1 overall compression ratio 1.0:1
last 5 minutes:
11 packages into 11 out packets
0 paks/sec output paks/s 0
32-bit/s at 28 bits/sec out
496 bytes decrypted 329 bytes encrypted
13 decrypted Kbps 8 Kbps encrypted
1.0:1 overall compression ratio 1.0:1
FPGA:
DS: 0x6538DE50 idb:0x6538CD08
Statistics for virtual private network (VPN) Module:
68607 68607 out packages packages
1 paks/s to 1 output paks/s
11 Kbps in 11 Kbits/sec out
29298 decrypted packets 39309 encrypted packets
package overruns: 0 packets output dropped: 0
tx_hi_drops: 0 fw_failure: 0
invalid_sa: 0 invalid_flow: 0
null_ip_error: 0 pad_size_error: 0 out_bound_dh_acc: 0
esp_auth_fail: 0 ah_auth_failure: 0 crypto_pad_error: 0
ah_prot_absent: 0 ah_seq_failure: 0 ah_spi_failure: 0
esp_prot_absent:0 esp_seq_fail: 0 esp_spi_failure: 0
obound_sa_acc: 0 invalid_sa: 0 out_bound_sa_flow: 0
invalid_dh: 0 bad_keygroup: 0 out_of_memory: 0
no_sh_secret: 0 no_skeys: 0 invalid_cmd: 0
pak_too_big: 0
tx_lo_queue_size_max 0 cmd_unimplemented: 0
flow_cfg_mismatch 0 flow_ip_add_mismatch: 0
unknown_protocol 0 bad_particle_align: 0
35535 seconds since the last cleaning counters
Interruptions: Notification = 54892
Router #.
vpn module on board can certainly improve VPN performance comparing to pure VPN software, but is not as good as the AIM - VPN module.
So, this will depend on your vpn traffic load, etc...
-
VPN configuration blocking Internet connectivity
I own an iPhone6 (bought in November 14 and another iPad4 (bought in early 2014) - I face a problem even in both devices.)
Whenever I'm trying to be devices connecting to the Internet (this either through Mobile or wireless data, I have to take concrete steps to start-up the VPN setting without which the device connect to the Internet. However sometimes (although not very often) the VPN configuration gets turned on by itself without manual intervention (on start-up or mobile data or WiFi on the device). So there is always some delay time in the connection to the Internet whenever I want to use the device.
I would be grateful for suggestions from the community in order to overcome the problem.
You have installed VPN software or you have configured in your VPN settings? If you have a VPN configuration, then check its configuration. If you do not have a VPN configuration or a VPN software installed, then the VPN switch in settings should not illuminate.
-
UN VPN installation in contact?
Hi all...
in fact, I did installed vpn in contact in my iphone 4 and I even signed
through my email but I do not it connected because I didn't know how to do...
but in any case now, I decided to install United Nations and I don't want to use it if I have when I
went into the vpn in touch applications affecting to disconnect it shiws it you would have to
Download other software to close your session and I clicked the logout button after
There's an open page on safari mu saying that some app download.
but I don't him has not downloaded it and went out to the menu and I watched my vpn in
Touch app so it has been disconnected...
so the question is who is she disconnected real-time now that I can install United Nations from my iphone and
It is not mandatory to install another software that is the vpn software were asked to get disconnected?
To remove the application, press on and hold icon of the app until it wiggles, tap the red X at the top left of the icon to remove.
When finished, press the Home button.
Maybe you are looking for
-
Apple tv is cutting by listening to the shows and movies
Why my Apple Tv is cut off when I listen to Netflix
-
HP 14-r015tx: replacement of the Wi - Fi card on HP 14-r015tx of Ralink RT3290
Hi all experts out there. Previously, I posted about my problem with connection Wi - Fi here. Finally, I just get my laptop to HP Service Center. They told me that the Wi - Fi card I have (Ralink RT3290) is broken. They want to change it for me, but
-
Service Pack3 installs on Windows XP error: 0X8024002d
Service Pack 3 will not download the update. Error 0x8024002d constantly
-
Impossible to uninstall the dvd game
Have Vista Premuim, I installed a dvd set went in the Panel and on programs and features and highlighted the game and push on uninstall, an error came that said Error launching install and I tried everything I could think without any result, does any
-
RE6700 seems to have current connectivity problems
I bought this unit in July. I set myself initially but he seemed to have intermittent problems with connectivity. I reached out to the support team and an officer accompanied me through the initialization of the device and put it up. Since then, I