Installation of 10g on Suse 10 - Orarun
Hi allIn fact, I installed a few databases with a procedure that I found on the page of Novell, it simplifies the installation of Oracle without having to mess with some settings.
After you have configured the basic Oracle Server to install, just allow the oracle user.
Then change the ORACLE_HOME and ORACLE_SID in /etc/profile.d/oracle.sh
After that just to run the script/usr/sbin/rcoracle start that defined the parameters of kernell
Then just run the installer from the ora
Is a fast method, but I thought that if this is the best
What do you think?
Archylus wrote:
What do you think?
Certified Oracle configuration of Novell we have orarun.
With Oracle Oracle certified configuration, we have "oracle-validated .rpm '.
For the rest of the Linux world, if you can find it, you can use Howards 'doris' script.
All make a lot of assumptions about how you want to configure your system. For each of them, the assumptions are usually satisfactory to start.
Once things are started for a test configuration (a database of "it works"), a professional DBA will review the configuration and make changes according to the load and politics.
So yes - orarun is perfectly good... for starters. (And probably not valid for 11 GR 2! As oracle - validated.rpm with 5u2 OEL not.)
Published by: Hans Forbrich, April 17, 2010 19:38
I must admit that I have not looked at 'doris' in a while. It's the support matrix can be much better and much more flexible than others, but I have no idea how he rises now.
Tags: Database
Similar Questions
-
installation of 10g on OEL5.5 (Details of the required package)
Hello all;
I need information about the packages required for the installation of 10g.
It's for my free practice only between two VMs on the same host and not for commercial purposes.
Usually I select after to the parcel. IS it enough? or do I have to add a few extra packages?
GNOME desktop environment
Editors in Chief
Internet graphics
Text on Internet
Development libraries
Development tools
Existing software development
Server Configuration Tools
Administration tools
Base
Support for software
System Tools
X Window System
System Tools
If I need additional packages, please provide details.
Thanks in advance...
The valid oracle package is available for Oracle Linux, RHEL not. Oracle-validated packages will fire the installation of the required packages and also configure your account settings and the oracle kernel.
-
Hello
I do the installation of 10g of obiee. I will have two boxes unix as primary and secondary and want to make it as NAS is shared between the two servers of the cluster. So I need to install it on a box mmee or both boxes.
Thank youHi RM,.
Yes, you must install OBIEE on both boxes. However, you will need to a part of the cluster with a box including the cluster controller running BI servers on both boxes. You can use the NAS to store the global cache.
I hope this helps.
Thank you
Diakité -
Installation of 10g on Windows XP
Hi friends,
I was installing on windows xp to oracle 10g, one of the constituents associated with network has failed and the indicated error was installation supports the system with DHCP MS Loopback adapt to the main network adapter on the system...
Remaining components were successful, so ignoring the error above I install 10 g, now it works correctly and how resolve the above error...
Please, someone guide me to this error...
Thank you and best regards...According to the documents, you must use the static IP address:
http://download.Oracle.com/docs/CD/E11882_01/install.112/e16773/reqs.htm#BABBDGBI
How to install the loopback adapter (including Windows XP):
http://download.Oracle.com/docs/CD/E11882_01/install.112/e16773/reqs.htm#BABGHEFB
Best regards
Gokhan Atil
-------------------------------------------------------
If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you -
Installation of 10g application server.
Hello
I want to install 10g application server in my Linux Machine... I want to know if I can install this application server
on RHEL5.Salvation;
What is your exact version? Refer to the installation guide,
http://www.Oracle.com/technetwork/indexes/documentation/index.html
You can find which certified platform is from prior software request. You can also check this info from the matrix of certification that is available to
http://www.Oracle.com/technology/support/MetaLink/index.htmlRespect of
HELIOS -
Installation of 10g clusterware on redhat 4.8
Hi all
I want to install 10g clustersoftware. When you run the root.sh script, I got an error.
# cat/etc/redhat-release
Release of Red Hat Enterprise Linux AS 4 (Nahant update 8)
# /u01/app/oracle/product/10.2.0/crs_home/root.sh
WARNING: directory ' / u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory ' / u01/app/oracle/product ' does not belong to the root
WARNING: directory ' / u01/app/oracle ' does not belong to the root
WARNING: directory ' / u01/app "does not belong to the root
WARNING: directory ' / u01' is not owned by root
Check to see if Oracle CRS stack is already configured
/ etc/Oracle does not exist. Create now.Set the permissions on OCR backup directory
Setting up NS directories
Configuration of the Oracle Cluster registry upgraded successfully
WARNING: directory ' / u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory ' / u01/app/oracle/product ' does not belong to the root
WARNING: directory ' / u01/app/oracle ' does not belong to the root
WARNING: directory ' / u01/app "does not belong to the root
WARNING: directory ' / u01' is not owned by root
Award of lnx01 default hostname for node 1.
Award of lnx02 default hostname for node 2.
Successfully accumulated necessary OCR keys.
Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
< nodenumber > node: nodename > < private interconnection name > < hostname >
node 1: lnx01 lnx01-priv lnx01
node 2: lnx02 lnx02-priv lnx02
Creating OCR keys for the user "root", "root"... privgrp
Successful operation.
Now formatting voting device: / dev/raw/raw7
Now formatting voting device: / dev/raw/raw8
Now formatting voting device: / dev/raw/raw9
Format of 3 complete voting devices.
Startup will be queued to init within 90 seconds.
/ etc / profile: line 55: [: / bin/bash =: unary operator expected]
Adding to inittab demons
Expected CRS demons to be in place within 600 seconds.
CSS is active on these nodes.
lnx01
CSS is not active on these nodes.
lnx02
Node local verification.
Run the root.sh on the remaining nodes script to start the demons of the CRS.The correct syntax should be
./runcluvfy.sh step - hwos post - lnx01, lnx02-verbose
-
Whats needed for the installation of 10G 32-bit on Windows server 2008 R2 x 64
Hello
I can't use 11g with what I need to use on the server.
I installed 10.2.0.3.0 32 bit on Server 2008 R2 x 64. It does not work and I get a page not found error when I navigate to our application. I know that I have to install a group of patches or something more recent than 10.2.0.3.0. How to install the Group of hotfixes 32bits 10.2.0.4.0 on my server? Is there a different group of patches that I need to install? When I tried to install the patches group, he said:
Checking Installer requirements...
Checking the operating system version: must be 5.0, 5.1, 5.2 and 6.0. 6.1 membership
Failed
What should I do to get 10 g 32 bit to work on my Server 2008 R2 x 64 server?
Thank you!Salvation;
Please try to run like on cmd
CD xxx\Disk1
xxx\Disk1 > setup.exe - ignoreSysPrereqs - ignorePrereqRespect of
HELIOS -
installation of 10g and 11g on the same system?
I have Windows XP and you have installed the database 10g. Can I install 11g on the same system and I need to use one of the database?
Thanks in advance.As long as you succeed ORACLE_HOME correctly to work on your different databases, having more than one version of Oracle on a server is not a problem.
Nicolas.
-
Installation of 10g (10.2.0.1) on Linux86 OEM grid control
Hi friends,
I managed to install OEM grid in our RHEL 4.6 Server (1st time).
At the end of installation, I received this message:
I can do #1 and #3.See below for information pertaining to your Enterprise Manager installation: 1. Use the following URL to access the Enterprise Manager Grid Control: http://server01.ebiztech.biz:4889/em 2. The Enterprise Manager installation includes an Oracle Application Server instance, which is administered using a special "ias_admin" user account. The following information was defaulted for the embedded Application Server instance: Instance Name: EnterpriseManager0.server01.ebiztech.biz ias_admin password: This password is the same the SYSMAN account. 3. The connection details for the Enterprise Manager Repository are: Host: server01.ebiztech.biz Port: 1521 SID: emrep
How do you get #2? What is the URL to it? Or is it done through SQLPlus?
Thank you very much
Ms. Kytterp2009 wrote:
REDA thanks, but the e-mail screen does not appear in my installation :(Ok.. no problem... I think in 10.2.0.1 as this option is not there
you are also able to go forward in the installation?
Concerning
RajeshPublished by: Rajesh Larry on May 24, 2010 16:11
-
Latest installation soa (10g)
Hi all
We frequently install soa in our development environment. Whenever we start with 10.1.3.3 and apply patches on it and update us to 10.1.3.4.
Is it possible to directly install 10.1.3.4 with all latest patches that it contains, so that I need not suffer the pain of installing SOA patch to fix. If it is agreed to give the link.
Thank youArun,
I guess for the version 10133, you would 10131 prerequisite installation and application of a patch for 10133.
For 10134, the only way is to install 10131 and apply a patch 10134 on it.
-
After the installation of 10g under windows2003 server: problem
Hello!
-I installed 10g on windows 2003, versio is: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 -.
- But every time when I restart/start/open my windows, the required startup database system, while all the oracle services are running properly.
-Suggestions will be very grateful in this regard.
Thank you!
& Best regards.Windows Oracle service OracleService
Is the key to register as hklm\software\oracle\key_home_name\ora_sid_autostart set to TRUE?
-
I installed the client to relase 10.1.0.2.0 oracle 10g on windows xp.
I have used before to oracle 8i client on the computer. but uninstalled. and deleted records and directories.
Now, if I try to connect using sql * plus, AMT is unable to solve the connection identifier.
SQL * more and sql navigator still seek the old tnsnames.ora which is not existing more if I set path
for the new tnsnames file. This seems very ridiculous.
I have everything in place.
1. I set ORACLE_HOME as C:\Oracle\product\10.1.0\Client_1
2. I put TNS_ADMIN as C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN--c'est where I TnsNames.ora and sqlnet.ora.
Here's my sqlnet.ora
sqlnet.ora # Network Configuration file: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (TNSNAMES)
Here are my tnsnames.ora
XXX.XXX.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = XXXX. XXXX. XXXX.com)(PORT = 1521))
)
(CONNECT_DATA =
(SID = orcl)
(SERVER = DEDICATED)
)
)
Any ideas?
Kind regards
G.Am I missing something?
Yes, a clue.
the tnsnames.ora does not have an alias labeled "orcl" so adds a
XXX.xxx.com = ORCL
-
installation of 10g to the CentOS error
Hello
When I want to install oracle error occurred which shows the image
You now why it is? Thank you very much
Image:! http://www.soydash.com/Oracle.jpg!
Published by: MUSTAFA Araz on August 27, 2009 14:23install the package libxp
-
Using backups 10g with the new installation of 11g
Hello Forum Oracle; If I install a new copy of Oracle 11 g xe, it'll work the backup I have a 10 g xe? My APEX applications in the installation of 10g xe will be restored after a data recovery?Details of the OS message pl. You must export the data from 10g XE and import in 11g XE
http://docs.Oracle.com/CD/E17781_01/install.112/e18802/TOC.htm#CIHCDCDH
HTH
Srini -
10g | RMAN | Daily backups in case files
Hi guys
RMAN > show all.
using the control file of the target instead of recovery catalog database
RMAN configuration parameters are:
CONFIGURE REDUNDANCY 3 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to 'D:\oracle\rman\backup\%F ';
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE the FORMAT of DISC TYPE CHANNEL DEVICE "D:\oracle\rman\backup\%U";
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SNCFSCT. ORA'; # by default
RMAN >
The foregoing describes RMAN configuration, I've done with the installation of 10g in my laptop for learning purposes. Now, how can I make sure that every day the backup is created in case files as below mentioned few
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_21
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_22
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_23
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_24
My backups used to get created under individual records until I changed the type of RMAN channel with "CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'D:\oracle\rman\backup\%U';' "
Please suggest.
Thanks in advance
rthampi wrote:
Hi guys
RMAN > show all.
using the control file of the target instead of recovery catalog database
RMAN configuration parameters are:
CONFIGURE REDUNDANCY 3 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to 'D:\oracle\rman\backup\%F ';
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE the FORMAT of DISC TYPE CHANNEL DEVICE "D:\oracle\rman\backup\%U";
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SNCFSCT. ORA'; # by default
RMAN >
The foregoing describes RMAN configuration, I've done with the installation of 10g in my laptop for learning purposes. Now, how can I make sure that every day the backup is created in case files as below mentioned few
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_21
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_22
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_23
D:\oracle\product\10.2.0\flash_recovery_area\SCT\BACKUPSET\2015_11_24
My backups to be created under individual records until I changed the type of RMAN channel with ' CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'D:\oracle\rman\backup\%U ';
Please suggest.
Thanks in advance
These 'individual files' report to the FRA. What you need to do is allow rman use the FIU, which it wants to do by default. Then clear your default settings trying to name/place your backups differently.
Maybe you are looking for
-
Fan of Qosmio F10 issue resolved
Download and install the latest driver (version 1.0.2.6) tv tuner. The fan is unbootable in the normal activity of windows. Also in high power profile start fan at low speed and is controlled by windows (start and stop after 15-20 sec). Fan very nois
-
For Qosmio X 300 NVIDIA display driver - 156
Aight guys, I m really frustrated with this I m helpless about what version of the drivers for my GeForce9800M I have to use. I already tried to use the drivers recommended Toshiba Web site at:http://PT.computers.Toshiba-Europe.com/innovation/downloa
-
Hi everyone, when I have executed the mandar... There is an error that appears someone can help me? error 42 when datasocket write generic error... Thank you!
-
Installation of Windows on Visual PC 2007
Hey this is my first time using Microsoft answers, Ok, I need to know how to install Windows on Visual PC where can I get the OS it's all
-
upgrade from my other computer