Satellite L300-1BV - series of blue screens

Similar Questions

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite L300-1BV and fatal issues with WXP

  Hi guys -.

  Very well. My Toshiba Satellite L300-1bv, loaded with a copy of Windows XP SP3 home edition, started having glitches and slowing down questions that grew progressively until it would completely freeze after a random interval of time. Try to boot now returns a missing hal.dll error.

  I'm almost certain, given the characteristics of this that the hard drive is a failure, mainly because he began to thrash continually without reason a few months in him. On the other hand, it could be a mistake of memory through Google diagnostics.

  I ve managed to install a copy of Windows XP Home SP1 edition on a new partition (the one broken leaving intact), but I don't know how long it will continue to operate in light of a possible hardware failure so I don't want to commit.

  Any help would be massively appreciated.

  Hello

  What assistance do you have exactly?

  As you say the problem could be related to a hardware (RAM, HARD disk problem) or software (missing hal.dll, corruption of the operating system) problem

  If new OS installation (with all patches, service pack) no did not help, then a problem of material is possible in this case, replace defective parts
  No one can say what part could be corrupted it s is necessary to test means that the RAM or HARD drive needs to be replaced and then you could test how it works

  PS: there is a nice tool to drive HARD HDD Fitness called diagnosis test for google's free simply

• LCD screen triggers - Satellite L300-1BV

  Hello

  Recently bought a L300-1BV, for a pressie Christmas for my daughter, I was put to her.
  Sometimes the screen turns off and you do not see the screen, although it seems as if there is little light
  If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  Someone at - it any ideas what the problem could be

  Thank you

  Steve

  Hello

  > If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  To me, this looks like a connection problem. Maybe some loose cables etc.
  The FL inverter is one part he control the LCD backlighting.
  Perhaps this part of malfunctions, but please understand that it is not easy to say what the problem might be exactly.

  I think you should communicate with MS in your country as soon as possible. The laptop is under warranty and everything should be done for free.

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Re: Satellite A500-1 - slow after blue screen

  Hi all

  I've owned a Satellite A500-1 in a year with no problems at all until a few days ago. When it tuning on it gave me a blue screen of death, and after 10 seconds, it turned blue, so I couldn't read error.

  I noticed reduced performance since it happened. Especially when you play games or movies HD, the picture and sound will freeze every few seconds. This happens in Windows 7 and Ubuntu. I did a new install of both, but the problem persists.

  I scanned the hard drive and memory errors, but it wasn't everything. Cant someone give me some advice, please?

  Thank you

  Hello

  > This happens in Windows 7 and Ubuntu. I did a new install of both, but the problem persists.
  This would mean that the problem is hardware-related and operating system installation seems to be ok, but it could be anything and it s is not easy to say what part is affected.

  Some parts, you can check yourself like RAM and HARD drive.

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  If both tests cannot find an error, it must be another problem as the motherboard or the CPU. For such a diagnosis, you must contact an authorized service provider. They can help you get rid of this problem. You can find a complete list of the guys here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  :)

• Satellite Pro L510 - crashes and blue screen

  Hello
  I am a new user of the Toshiba Satellite Pro L510, since last September, barely 3 months.
  Recently, had met 2 crashes (2nd is today s). As it happened today, there are blue screen that appears, which included messages like 'crash', 'written' physical memory... etc.

  In addition to send it for repair for this new laptop, I don't know what is the best way to manage this accident and what might be the best way to prevent this accident.

  Recently I installed programs such as Microsoft SQL Server 2008, anti-virus program (Sophos), which I think are necessary (the first was for my studies as well).

  Would appreciate any pointers to advise me if these could be the causes of the accident, and that I have to do to keep the better laptop or y at - it any generic deficiency maybe I should take notes.

  Thanks in advance for any advice for this laptop.
  Kind regards

  Hey,.

  First of all, I must say it is very difficult to say whether this problem is software or hardware related, but in most cases these accidents are caused by software or drivers...

  I put t know how many programs you have installed, what OS you use and if there are compatibility problems, but you can test it yourself: Toshiba start recovery disc recovery facility. After that, you have the same settings that you have purchased.

  You should examine it a little these parameters. If everything is ok, it was just a problem software or driver. ;)

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• Satellite P20-771: Error Message blue screen after the reinstallation of the OS

  I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

  As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

  I thank in advance for your help

  Roberto

  Hello

  I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
  Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
  It is not easy to say why the blue screen appears on you laptop.
  Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

• Satellite L505-13W shows error blue screen

  My error on blue screen shows computer laptop SATELLITE L505-13W.
  The operating system is started and after some time, it shows a blue screen error and restarts.

  Even after repair successful when restarting requested repair, he showed the same error.
  So I tried to recover with the recovery cd, but it turned out to be a tragedy.

  He eraced my complete HDD to stone age and smiled saying recovery is not possible.

  Please help me...

  Hello

  If the laptop can not be recovered using the recovery disc, then it feels the hardware problem.
  Are you sure that your recovery disc is OK?
  Have you tried to install the OS using another installation disc?

  Perhaps it would be useful to check if the problem could be related to defective recovery disk, but if the BSOD (blue screen of death) appeared before the installation of the OS, I would say that the problem can be caused by an internal hardware malfunction

  It would be necessary to check the modules of RAM and HARD drive.
  HARD drive can be verified by using the diagnostic software from disk as Drive Fitness Test (freeware)

  RAM could be checked with a tool like memtest, but you need a system to market, then in this case, you can not check the RAM using a software that I recommend to remove a module and test the laptop using a module in each slot

• Strange problem code 39 on my Satellite A500-02J with constant blue screens

  I bought my Toshiba Satellite A500-02J 2-3 months ago and I opened my laptop this morning and I was not connected to the internet and had no installed audio device.

  Then I got a blue screen of death. I restarted my laptop and I went to the Device Manager to see that most of my drivers had the yellow exclamation mark with the super Code 39 error (windows didn't start my drivers for X reason...) and then I had a second blue screen. I was very careful from the beginning with this laptop and I know that this is not a virus since a did not something 'weird' with this computer. Best of all, it's that my USB ports no longer works and I can not backup my stuff important just in case...

  Thank you for helping me,
  Odin

  Hi Odin

  It is not easy to say why this happens, but if there are so many problems, I advise you to install the new OS by using the HDD recovery procedure.
  Try to start your computer in safe mode and delete all data on the second partition.
  Start your laptop with F8 install OS using these instructions - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When you install the operating system by using this method of HARD drive recovery all data saved on the second partition will not be deleted.

• Satellite L650 - 10 M shows blue screen with Twinhan Azurewave AD-SB200

  I have the blue screen after the USB satellite map starts... Twinhan Azurewave AD-SB200

  I have Windows 7 Home Premium 64-bit

  Satellite map worked on the very nice old PC with Windows XP without any problem

  After the start of the map satellite with about 5 minutes of work, I get the blue screen, and then restart it to Windows

  Then, I get this message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 3073

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF80002C8F805
  BCP3: FFFFF880089F6AA0
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\083010-14882-01.dmp
  C:\Users\TOSHIBA\AppData\Local\Temp\WER-47143-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please I need help fast

  Thank you

  This card is designed to run on Windows7?
  You have installed correct driver Win7?

  Sorry, but Toshiba doesn't support third party hardware and software so if you have any problem with Toshiba then here you are on the right place. For all other questions, contact technical support Azurewave and ask for help.
  Thay better experience with own product and I hope that they can help to make it work properly.

• [SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

  [Problems]

  Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time

  Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast

  Solves delays random system - system shuts down randomly for no apparent reason
  Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2
  Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.
  [Source of problem]
  The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft.  6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.
  Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.
  [Clean Install FIX]
  When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.
  Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.
  [Windows OS already loaded FIX]
  -Device Manager-
  Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).
  Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.
  Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.
  I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D
  After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
  • Event ID: 1001 Source: error checking
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.

    The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.

  OS: Microsoft Windows 7 Ultimate 64 bit
  Antivirus: Microsoft Windows Security Essentials
  Motherboard: Gigabyte GA-890FXA-UD5
  RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

  Video: Diamond ATI Radeon HD5850 1 GB DDR5

  PROCESSOR: AMD X 4 965BE
  HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K
  PS: Antec EarthWatt 750W PSU V2.3
  KB: Logitech G15
  Mouse: Razer Deathadder 3.5 G
  Gamepad: Belkin n52te
  First try to solve this problem:
  Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.
  At ran Windows Update for the current patches. Random BSOD on restart.
  Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.
  Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.
  Run the checker - 90% chance of BSOD
  Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

  Second attempt to solve this problem (low-level format):

  Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.
  Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00
  Clear the result of the boot record - 0x00
  Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00
  
  
  Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)
  Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file
  Change the BIOS settings-
  Integrated Peripherals-
  OnChip SATA Type [Native IDE] change on [AHCI]
  (No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

  Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

  Install the driver USB 3.0 NEC 21:22 - result - GOOD
  Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

  Install the network drivers Realtek Lan_win7 - result - GOOD

  Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

  Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

  Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

  Shutdown - 21:51

  Power - result - GOOD

  Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD

  Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

  Install Google Chrome - result - GOOD

  Install Fusion - 2.0.1.117

  Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.

  Shutdown

  Power - result - GOOD

  Install the G15 - result - GOOD

  Install Windows Ventrilo 3.0.5 x 64-GOOD

  Install the Steam Client

  Install COD4MW2

  Change the settings to save energy for the computer to never sleep.
  22/05/2010
  Install gtalk, gApps
  Up to 08:57 05/22/2010 BSOD Mini dump.
  
  Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

  BSOD more 2s on 2 days.

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ===========================================

  The material is highly suspect!

  Since you reformatted and reloaded Windows this indicates that the problem is either material or a
  very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
  mouse or keyboard, BIOS, chipset and other low level drivers.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------

  Even if you have some of these here tried a fairly complete convenience store just in case.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -----------------------------------------------------

  BCCode: 109 0 x 00000109

  Cause

  There are generally three different causes for this bug check:

  1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.

  2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.

  3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.

  BCCode: 109 0 x 00000109<-- read="">
  * 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

  --------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Upgrading processor on Satellite L300-1BV

  I've already updated the laptop of a T1600 (Celeron), to a T3200 (Pentium Dual Core). But no one knows how far I can go to level P 478 processors?

  If so, could provide you the processor numbers?

  + The message was edited: model number changed on the subject.

  Satellite L300D-1BV is know for me. This model number is correct?

  However, in general, you should check the compatibility of the chipset.
  Where the chipset is compatible and would support the CPU, you have good chances to make it work.

  But I'm not sure if BIOS would be able to manage the new processor properly.