installation of BIOS

Similar Questions

• Installation of BIOS options

  Greetings,

  There is a BIOS Update Extensible Firmware Interface UEFI (Unified) for my laptop. When I go to install sp52509.exe, I get a box dialog "Select installation location", which requires "HP UEFI BIOS update can be installed on the UEFI system disk Partition on a USB key or hard. Please select the location you want to use below:

  • On (recommended) hard UEFI system partition
  • USB Flash drive

  What is the "UEFI System Partition' on my hard drive?

  Thank you

  Shane.

  It will create a small partition of 100 MB, which is not visible in your operating system. How ever when you want to re install the operating system through the provided HP recovery disks, it will be remove and re create the partition. So no worries. It's good for your computer that helps you find accurately the exact material issues on your laptop, if it is there.

• Lenovo G710 detects that no SSD drives in the BIOS.

  Hello, I have a Lenovo G710 8 GB i3. I wanted to swap the slowest 1 TB of HARD WD for a DDI, but the installation drive BIOS or windows just does not detect. SATA is set to AHCI and startup is set to UFEI. The SSDS works very well on a laptop 5 year old Advent. I also tried different SSD with Windows pre-installed on it, and which has not been detected either.

  Managed to fix it by cloning the 64Gig on my new 512 GB SSD SSD using a USB adapter SATA. Now my laptop start to my new SSD 512 GB with a 64GB C:\ partition and the rest I can format and use for games and movies.

• Update unsuccessful BIOS with M3100/M5100

  I intend to upgrade proseccor AMD Athlon 64 4000 + my Aspire and map graphic.

  I read that AMD Phenom X 4 9500 would probaply the best option. Before ordering proseccor I tried to update my bios R02-B1 without success. Installation of BIOS has informed "program file part number does not match your system.

  My PC is labeled and purchased as M3100 but BIOS says it's M5100 (I think that this conflct is due to the major warranty on this PC repair)

  Then info from the BIOS:

  Aspire M5100

  MB S/N 04PJ75018889

  Principal ID Board F690GVM

  SM BIOS Version 2.4

  System BIOS Version 6.00 P6

  System BIOS ID R01 - A3

  Version of the BIOS date 10/10/2007

  Thank for all succestions.

  When you update your Bios, you must stay with like kind. If A then stay with an if B stay B and L with L... I think that is the problem and looking at the page for your updates to the Bios, it looks like yours is better then what is listed.

  Hope this helps some

  James

• T1600 to upgrade the BIOS A02 should first ask A04, but which is no longer appears online

  I looked at the support page - drivers and downloads to a Precision T1600 I'm working.

  I had a few symptoms (keyboard USB not recognized during the boot/BIOS) this BIOS upgrades reports fix.

  I downloaded the installer for BIOS A16, but when I run it refuses, saying that I first have to go to BIOS A04. Very well, except the 'older versions' under the BIOS of the support page for this model only go back to version 10. (I tried running A10 and stops with the same message too.)

  Can I get a copy of the updater A04, to allow me to complete the update for these most recent available?

  Too bad! I found that the older BIOS A04 is indeed still displayed, simply not accessible from the home page drivers & downloads for the T1600. I just googled "T1600 BIOS A04" (without using the Dell search box) and found a link immediately.

  Because new versions of BIOS require A04 first, it would be nice if the drivers & downloads page offers a direct link to A04 without needing to do a google search that is external to this element of system requirements.

• Satellite L40 - changing RAID SATA to IDE SATA

  Hello

  I tried to change the option on my SATA RAID bios (that I think I have by default) to SATA IDE, but when I go into my bios, I find no option to change this aspect.
  I have a Toshiba Satellite L40 and only Linux UBUNTU 8.10 installed on my computer. I saw messages in the other Foruns where I told me to update my bios but I don't know how to do it under Ubuntu.

  Can someone help me with this solution OR give me better to change that?
  Thank you

  As far as I know, this option does not exist and update of the BIOS will not help at all. The BIOS update does not any additional installation.
  BIOS update is only possible under Windows.

  Can you please tell me why you want to change this option?

• Touch smart Notebook 15 r015dx: keyboard keyes

  Keys on my keyboard seem to stick for example if I type the letters c or z "cz" appears, a or d 'Announces' pop up or sometimes by pressing the letter 'a' is my favorites appear when I'm on the Internet. It's only the second and third letter on the left side of the keyboard. Any ideas would be greatly appreciated because using the screen keyboard on takes too much time. Thanks in advance.
  
  Here's what I tried.
  Update BIOS
  Hard reset with out the battery and pressing the power button for 15-30 seconds.
  Take out the battery and put back
  Pressing shift x 5
  Pressing the function (fn) key
  I'm just starting lost right now.

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum of Support HP
  
  It seems that you are having problems with your laptop keyboard.
  We will surely help you with that.
  
  Let's start with a question:
  1 was there any liquid divided on the laptop keyboard
  2. are there as no dust settled on the laptop keyboard
  3 are there keys that fell / keys that are loose
  
  Troubleshooting:
  Step 01. Click the Start button and select Control Panel
  Step 02. Open Device Manager and expand the keyboard in the list
  Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall
  Note: This driver will settle again automatically on your laptop
  Step 04. Please turn off the laptop
  Step 05. Disconnect the power/AC adapter and also remove the battery too
  Step 06. Press and hold the power button of the laptop for a minute
  Step 07. Now re - insert the battery back in and plug again the power supply/adapter
  Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS
  Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS
  Step 10. Use the arrow keys to say 'YES' and press enter
  Step 11. Now press ESC/ESC. Save Changes and Exit - Yes
  Step 12. Now, please wait until the unit load the Windows operating system
  
  Please click on the link shown below to solve the problem with greater ease
  http://support.HP.com/us-en/document/c03738933
  
  Last but not least could you please check and verify if the external USB keyboard works fine or not?
  
  Hope this helps, for other queries in response to the post and feel free to join us again
  
  * Click on the star of CONGRATULATIONS on the left to say thank you *.
  
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• HP probook4550: hit when keys on the laptop instead of the letter hit keyboard commands come up

  When typing on keyboard letters type when I touched them.  After that struck a few minutes instead of the letters come, control keys happen rather

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop keyboard.

  We will surely help you with that.

  Let's start with a question:

  1 was there any liquid divided on the laptop keyboard

  2. are there as no dust settled on the laptop keyboard

  3 are there keys that fell / keys that are loose

  Troubleshooting:

  Step 01. Click the Start button and select Control Panel

  Step 02. Open Device Manager and expand the keyboard in the list

  Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall

  Note: This driver will settle again automatically on your laptop

  Step 04. Please turn off the laptop

  Step 05. Disconnect the power/AC adapter and also remove the battery too

  Step 06. Press and hold the power button of the laptop for a minute

  Step 07. Now re - insert the battery back in and plug again the power supply/adapter

  Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS

  Step 10. Use the arrow keys to say 'YES' and press enter

  Step 11. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 11. Now, please wait until the unit load the Windows operating system

  If the problem persists, please check and verify if an external keyboard works very well with your laptop

  : Note Click on the troubleshooting steps mentioned link below to learn more

  http://support.HP.com/us-en/document/c03738933

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Satellite Pro L300 install vista

  Hi all

  Be able to install Vista family premium, currently have installed Vista Basic and whenever I have it try for a clean install of Vista premium just crashes to the stage were it says, end the installation and stay that way for hours and will not end. Any help would be great.

  Hello

  It is really strange. never heard of it.
  Before starting Vista installation definition BIOS to the default settings.
  What is some external device connected to your laptop?

• HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card

  I need to install a new graphics card on a HP ProLiant ML310 Gen3 of v2 server as edge one is a failure.

  Card - EVGA GeForce 8400 GS

  During the installation startup BIOS hangs after the initial check (100% / no errors) and remains at a black screen indefinitely instead of forward to the ProLiant logo boot before windows.

  Therefore, I am unable to enter the bios to enable the PCI 16 slot.

  Before the system LED flashes red at this point.

  Any help will be appreciated.

  Hello:

  You can also ask your question on the Business - section ML servers HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VV9KLDjbLGg

• Can not enter my password

  My B key stop working. And now when I turn on my PC I can not put the first letter in the cause of password is a B

  Dear customer,
   
  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop keyboard.
  We will surely help you with that.

  Let's start with a question:
  1 was there any liquid divided on the laptop keyboard
  2. are there as no dust settled on the laptop keyboard
  3 are there keys that fell / keys that are loose
   
  Troubleshooting:
  Step 01. Click the Start button and select Control Panel
  Step 02. Open Device Manager and expand the keyboard in the list
  Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall
  Note: This driver will settle again automatically on your laptop
  Step 04. Please turn off the laptop
  Step 05. Disconnect the power/AC adapter and also remove the battery too
  Step 06. Press and hold the power button of the laptop for a minute
  Step 07. Now re - insert the battery back in and plug again the power supply/adapter
  Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS
  Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS
  Step 10. Use the arrow keys to say 'YES' and press enter
  Step 11. Now press ESC/ESC. Save Changes and Exit - Yes
  Step 11. Now, please wait until the unit load the Windows operating system

  If the problem persists, please check and verify if an external keyboard works very well with your laptop

  Note: Please click on the troubleshooting steps mentioned link below to learn more

  http://support.HP.com/us-en/document/c03738933

  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the right of say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Ideapad Windows 10 question sleep Yoga 13

  Hey community,.

  I have recently upgraded to Windows 10 and so far no big deal don't except this one:

  Where two users are connected at the same time, and one of them closes the lid to enter standby mode, Yoga restarts instead of go to sleep. This happens only in the case that more than one user is connected to Windows. This was fine when I was using Windows 8.1, but has stopped working in Windows 10.

  Another small issue: Yoga is not tablet mode are the request, folded in the tablet. Automatic screen rotation works fince btw and keyboard is well off in tablet mode. But 10 Windows does not recognize it.

  Advice, especially on the first topic on the eve?

  PS: 10 Clean of Windows Installer, default BIOS, Windows default power settings.

  OK people, I hear.

  I dug a little deeper into the event viewer and encountered some issues with the Conexant Smartaudio device. Uninstall all the drivers for the audio device and instead use the default windows drivers seems to fix the problem.

  This is may be of help to someone else.

• WN810EA: update Pavilion dv7 4010sw memory

  Hi guys,.

  I want to improve RAM in my notebook.

  Right now I have a standard Samsung 3GBs.

  I tried to mount the 2 types of memory, but it did not work with both of them.

  First was kit Kingston HyperX Impact of 2 x 4 GB, 1600 Mhz, CL9, 1.35v, PC3-12800.

  So good Ram, 2 x 4 GB 1333 Mhz CL9, 1.5V, Pc3-10600 - this is identical to the original memory mounted just know except for size and didn't work too!

  After installation of BIOS them two saw new memory but Windows 7 has not begun, and computer restart automatically over and over again saying that he had a problem with the Windows startup.

  HP Recovery and all Windows diagnosis and repair of tools does not work as well.

  When I put back old memory everything comes back to normal and to start Windows.

  No idea why this laptop won't work with those memories? Help, please.

  Hello

  Why not use RAM Samsung? Even they use the same characteristics, but they are not the same as you can see.

  Kind regards.

• HP 15-r243TX drivers: HP 15-r243TX keyboard drivers req

  Hello

  I'm unable to download the drivers for my new computer keyboard hP laptop 15-r243TX

  Please send me the link where I can update the drivers

  Best regards

  SMK

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Step 01. Click the Start button and select Control Panel

  Step 02. Open Device Manager and expand the keyboard in the list

  Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall

  Note: This driver will settle again automatically on your laptop

  Step 04. Please turn off the laptop

  Step 05. Disconnect the power/AC adapter and also remove the battery too

  Step 06. Press and hold the power button of the laptop for a minute

  Step 07. Now re - insert the battery back in and plug again the power supply/adapter

  Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS

  Step 10. Use the arrow keys to say 'YES' and press enter

  Step 11. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 11. Now, please wait until the unit load the Windows operating system

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion dv62150: cooling fan

  Computer laptop States (902) cooling fan may be having problems with the cooling fan... Message is on the initial pages... cannot get pass this screen...

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having difficulties with regard to your Netbook cooling fan

  We will surely help you with this

  According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

  Causes/reasons for this problem:

  1. sometimes, it's just because of the dust, animal pet hair slows down the fan

  Perform the illustrious below troubleshooting steps:

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now please wait unit loads Windows and then stop the Netbook again

  Step 09. You need to clean all vents and openings that are really good with a can of compressed air

  Note: If you still get the same error, we need to replace the fan

  I highly recommend you immediately Contact HP technical support by phone to get help immediately to get your Netbook fan replaced and serviced by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL 84

  Although I am an employee of HP, I speak for myself and not for HP