Installation of EM12c. Safety officer... Failed.

Similar Questions

• get document cloud installation a message "webget request failed.

  get document cloud installation a message "webget request failed.

  Hello Kent,

  Please see: get an error to install Acrobat DC - WebGet request failed

  I hope this helps.

  Concerning

  Megha Rawat

• KB2418241 Installation causes TFS Build to fail

  We recently had a series of automatic updates installed on our TFS server over the weekend.  After these updates have been installed - our generation automated nightly began failing, he could get later - would not have build - nothing...

  Backup off the patches that have been installed one at a time until he started working again - and then reinstalled the ones we removed until we could get his failure once more, we started.  We were able to narrow the problem down to a fix.

  The problem that happens when install us KB2418241 (updated for .NET Framework SP 2.0 and 3.5)

  http://support.Microsoft.com/kb/2418241

  Our generation is nothing fancy - just get latest - perform a build, and that's all.

  The event log provides no details as to why this is happening, just a single message with the command start MSBuild - when you try to run this in the command prompt - you get a WindowsShellEx "Access denied" error.  Our services are connecting with the right credentials and the domain account using the service has full access to the folder to get later.

  For the time being - we will not re - install the patch until we find out why it does not work - but it would be good to know why it fails at first.  All I have this problem and have ideas on how to resolve the issue in addition to not use the patch?

  Thank you

  Chase

  See the section "How to get help" of http://support.microsoft.com/kb/2418241

  For individuals (only), visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation update KB936330 (Vista SP1) fails with error 8007371B code. No one knows what is the cause?

  I've had this problem for awhile now and it seems to be no details on how to stop the resulting error code.

  The update of the serivce pack seems almost half installed the first time that I have tried (and the first time she didn't).  Whenever I try once again today, the process bar is automatically up to halfway and then it goes all the way to the breast are contiguous 5 minutes and gives this error code.

  This update seems important.  I can download all other updates without problem and downloaded system preparation tool already and tried to install the update by downloading it manually - the same problem occure.

  Can anyone help please?

  I tried the above and the error persists.  Is there another way?

  The only other 2 methods would be:

  (1) try to run the System File Checker and see if it can replace or repair which is not present. Read the section ofthe System File Checker utility

  (2) do a upgrade on the spot , aka Repair the Installation, if you have the Vista installation DVD: How to perform a repair for Vista Installation

  In addition, Microsoft has extended its offers free support for those who are just trying to install Vista SP1 :

  From: https://support.microsoft.com/oas/default.aspx?ln=en-us&x=8&y=6&prid=11274&gprid=500921&st=1&wfxredirect=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for the Service Pack 1 (SP1). This support for SP1 is valid until August 30, 2010. Availability of support chat or messaging differs depending on your location. For customers resident in America North or Canada, chat and e-mail support is available.

  Some questions may require more Advanced support for which there is a charge.

  Please click on the first link to receive free assistance of MS before August 30 .

  MowGreen Services update - consumer safety

• Safety Office KB2509461 number update will not be installed. Any suggestions?

  Custody of Microsoft Update tries to install the security update KB2509461 number, but it will not be installed. I disabled my antivirus and antispyware, firewall. Any suggestios?

  You have Microsoft Office on your computer?

  I had the same problem of automatic updates now download and install this exact update and fails every time.  I think that the reason why it's a failure, it's that I have Microsoft Office on my computer, so it cannot update what either.

  I'm not quite sure how to do stop.

• The security of the Windows XP KB2289162 Office fails to install.

  The security of the Windows XP KB2289162 Office Download via Microsoft Update but fails to install.  I tried downloading Microsoft Fix It, but this has not fixed the problem.  How can this problem be fixed?

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/why-does-security-update-for-microsoft-office-xp/fa6c7729-c772-e011-8dfc-68b599b31bf5

• Re-Installation of security KB2644615 update failed

  KB2644615 has been successfully installed on January 11, 2012... about 2 weeks later, quite separately, my Vista Home Prem SP2 is become unstable so restored to a point of date before Jan 11... Since this update of security refused to install properly and blocks other Updates MS to settle if allowed to run. In fact it installs, but fails in step 3 of the configuration of re - start the update.  Tried Safe Mode + MSCONFIG with selective S/U & only MS Services running etc. without success... That Pasa? It has really become a nuisance.

  Hello

   
  Method 1:
  Check out the link and run the Fixit who is with the article. You can also try the steps outlined in the article.

  
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358
   
  Method 2:
  
  Visit the provided link and try the steps of troubleshooting mentioned in the article.

  
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Installation with Kodak ESP Office 2150 printer problem

  I tried to install my printer for hours. It is connected wireless and my computer picks it up on the network, but when I go to add printer, the installation will not through. When I try to add the printer via the Menu/printers/add printer to start, I get this message: "the printer installation failed. Impossible operation completed (error 0 x 00000643). "Then, when I try to install it via the Kodak Web site, its says:"failed installation. Error code is 80072F78. (Code: 101-80200000). "Can someone help me please. It is a very sensitive time. Thank you!

  You could settle on a previous installation. Try this:
   
  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it.
   
  Open the Device Manager
   http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See also these toppings:

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960

  Error: code 80072EE2 while installing Web all-in-one printer software
  http://support.en.kodak.com/app/answers/detail/A_ID/1754/kW/installation%20failed.%20Error%20Code%20is%2080072F78/selected/true
  NOTE: In addition to 80072EE2, this answer also applies to the following error code: 80072F78

• Installation of KB 2463332 custody failed, error 42 b. 'unknown error '! How to solve this?

  Today began to have trouble with newly purchased Excel 2010,... When save a worksheet Excel stops and closes its doors.

  Technician "remote access" Microsoft says prob is caused by my printer (HP C5180, bought in 2007) and download the latest version of the driver.
  After doing that I still have the problem.

  But if I change the default printer to something else, Excel works fine.

  But Microsoft Update says I need the Service Pack 4 (for Microsoft SQL Server 2005 Express Edition): KB2463332.

  I don't know if this pack is essential for my problem with Excel, but I tried several times to download and install, but the installation always "fails".

  I use Vista. He was always very well. I don't know exactly where is the problem.

  (Do I really need a new printer? It works very well!)

  Hello

   
  Method 1: try to reset the Windows update components and check if you can install the update.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058 
   
  Method 2: Download the stand-alone pack update from the Microsoft Download Center, put the computer to boot, and then install the downloaded update.
   
  Download the update here: http://www.microsoft.com/download/en/details.aspx?id=7218
   
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Installation of Windows 7 has failed due to the graphics card, can not go beyond "Complete Installation".

  Hello, I'm trying to reinstall Windows 7 Professional 64 - bit after an accident which is more allow me to start on the login screen of my previous installation of Windows 7 Professional 64 - bit.  When I try to reinstall the installation hangs and will not finish (even at night) on the stage of "Complete Installation"... ».  During my first install of Windows 7 on this computer I had the same problem and finally worked my way around it by removing the 2 GB of RAM (2 GB installed leaving) and the replacement of my gpu NVIDIA 8800GT with a gpu NVIDIA 8600.  I don't have the right to replace the gpu, and I believe that this issue could possibly be resolved by installing a suitable driver for the 8800GT before starting the installation.  Since I can't start is no longer in Windows 7 in a form in any way, the only option I know is to use the option to load drivers in the system found on the DVD itself System Recovery Options.  When I find the correct driver and install it, it returns the error "failed to install".  I am now at a loss to know what to do because it was the only solution I could think, am I missing something?  If this is not the case, how can I get Windows 7 installed again?  Thanks for any help.

  Hi Limerick,

  Please see the artcle following with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Canon MG4260 printer Wireless Installation for PC laptop Toshiba failed

  I have a Toshiba laptop L750 under Windows 7 Home Premium and I am trying to install a Canon MG4260 printer via a wireless connection. I managed to install this printer to a Dell laptop and an ASUS laptop wireless, but the keeps installation fails on the Toshiba. The drivers seem to install OK I get a message that my device is now ready for use, however shortly after I receive a "printer installation failed" message, but no further details. The icon of the printer for the MG4260 appears in the list of devices and printers, but when I right click on the device, I can not set as default printer. Any ideas on how I can fix this problem. Previously, I had a Dell 715W printer attached to all of the above including the Toshiba PC wireless for more than 12 months.

  Problem solved. Turned out to be Mcafee firewall.

• installation for hp b210a photosmart fails

  Product HP Photosmart all-in-one B210a

  Windows 7 (64-bit)

  When the printer was purchased the software has been installed successfully.

  Norton 360 has identified a virus (sorry no details) that has been blocked - not even sure if this has something to do with the problem.  Went to scanning some documents and software noticed were missing.

  Tried to re - install but failed - Setup error.  Utility Troubleshooting provides a document entitled failure of Installation HP - MSI 1603.  I followed solution sugested, but in vain.

  Uninstalling HP printer software and I tried to re-install-same problem

  Hi all

  Be sure to remove the current software by clicking Start > all programs > HP > HP Photosmart B210 > uninstall...

  Then go to programs and features and remove any point of the printer, all element should beging with RESUME, so you can see the Iris reading software...

  After you have uninstalled the software, restart your PC, download and install the updated software version below:

  http://ftp.HP.com/pub/softlib/software12/COL34268/MP-109398-2/PSB210_1315.exe

  Please let me know if that solves the problem.

  Shlomi

• Installation of VMware NSX Manager fails the upgrade of VMware NSX Manager fails

  VMware NSX Manager installation fails

  Upgrade VMware NSX Manager fails

  Please passed under the KB article, it can be useful

  VMware KB: Understand and troubleshoot VMware NSX Manager

• EBS12 installation on sparc solaris 10 fails

  Hello!

  Thanks to the precious help of Saddam Hussein, I could do that walk once but then I uninstalled it and installing costs again but I can't make it work, it keep fails with the same error:

  Note: I'm not recreate the area transit from scratch but Iam using the previous installation staging area, assuming that it is a static environment.

  
  Logfile located at /ebs/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_sunny/ApplyDatabase_10260217.log

  |      0% completed
  
  ------0% complete RC-50004: Fatal: error in ApplyDatabase:
  
  Creating control files is not
  
  Cannot run configuration database using RapidClone
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process.  Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  I want to install like oracle and choose oracle: dba as the database owner and applmgr:dba as the owner of apps.

  I made sure that the permissions on the directory oraInventory is 777, also on the var/tmp/.oracle. I checked all the steps of preinstallation document validity and they all pass.

  even if its control complaint file but I can start the database in the State of the mount, although it crashes if I try to open.

  my project settings are:

  default:3:::process.max-sem-nsems=(priv,256,deny);project.max-file-descriptor=(priv,65536,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,100,deny);project.max-shm-memory=(priv,4294967295,deny)

  group.dba:100:oracle kernel parameters:oracle:dba:process.max-sem-nsems=(priv,256,deny);project.max-file-descriptor=(priv,65536,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,100,deny);project.max-shm-memory=(priv,4294967295,deny)

  ulimit settings are:

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 65536

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  Memory (KBytes) unlimited
  

  the Oracle group parameters are:
  UID = 301 (Oracle) gid = 1000 (dba) groups = 1000 (dba), 2000 (applmgr)

  Group applmgr settings are:
  UID = 401 (applmgr) gid = 2000 (applmgr) groups = 2000 (applmgr), 1000 (dba)

  I can start the database in Mount sense of the State of the control file exists

  SQL > startup mount

  ORACLE instance started.

  Total System Global Area 1069252608 bytes

  Bytes of size 2109352 fixed

  427823192 variable size bytes

  624951296 of database buffers bytes

  Redo buffers 14368768 bytes

  Mounted database.
  SQL > show the settings panel

  VALUE OF TYPE NAME
  ------------------------------------ ---------- ------------------------------
  control_file_record_keep_time integer 7
  control_files strings ebs/oracle/VIS/db/apps_st/data/cntrl01.dbf, ebs/oracle/VIS/db/apps_st/data/cntrl02.dbf, /ebs/oracle/VIS/db/apps_st/data/cntrl03.dbf

  SQL > alter database open

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [2252], [2359], [322925629], [], [],.

  [], [], [], [], [], [], []

  $ lsnrctl status SCREWS

  LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on October 26, 2000 11:45:27

  Copyright (c) 1991, 2008, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=sunny.localdomain) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias of SCREWS
  For Solaris TNSLSNR version: Version 11.1.0.7.0 - Production
  Start date October 26, 2000 02:18:20
  Uptime 0 days 9 h 27 min 7 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /ebs/oracle/VIS/db/tech_st/11.1.0/network/admin/VIS_sunny/listener.ora file
  The listener log file /EBS/Oracle/vis/DB/tech_st/11.1.0/log/diag/tnslsnr/sunny/vis/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=sunny.localdomain) (PORT = 1521)))
  Summary of services...
  Service 'SCREW' has 2 occurrences.
  Instance of "SCREW", status UNKNOWN, has 1 operation for this service...
  Instance of "SCREW", State LOAN, has 1 operation for this service...
  Service 'VIS_XPT' has 1 instance (s).
  Instance of "SCREW", State LOAN, has 1 operation for this service...
  The command completed successfully
  $

  any help much appreciated.

  Have you reviewed (Doc ID 138701.1) referenced above? If so and it did not help so please connect a SR.

  Thank you

  Hussein

• Download flash Installer hangs at 30% then fails every time

  Hello, I'm running a MBP 2012 retina.  I download the latest version, but the Installer did pause for one minute in download (at the 30% mark) and then fails.  "The connection has failed.  Unable to complete the installation.

  I tried the rest of the solution in this thread:

  Flash Player installer hangs at 95%

  But I do not see the .pkg file in the downloaded .app file.  I'm not under antivirus and I restarted.  I used uninstall as well.  I use Safari.

  Any suggestions?

  Thank you

  Chris

  Managed to solve myself (see this thread: How to perform a "clean" Flash Player install in Mac OS X)

  Thanks for all the replies so