installation of Fedora core 11 and fusion

Similar Questions

• Fedora Core 14 and 2.6.35.6 - 48.fc14.x86_64 kernel, VM server 2.0 "running kernel does not.

  I tried to install VMserver on fedora core 14 with linux kernel 2.6.35.6 - 48.fc14.x86_64 and can't seem to make it work. I inserted the results of my attempts to install. I installed the kernel-devel, more recent GCClib files and pretty much everything else I found to install on the internet partaning to it using yum.

  -

  ---

  Ensuring services for VMware Server are stopped.

  Stop the VMware autostart virtual machines:

  Virtual machines

  Stopping VMware management services:

  VMware Virtual Infrastructure Web Access

  VMware Server host agent

  Stopping VMware services:

  VMware authentication daemon

  Virtual machine monitor

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)? ^[[B[[B^[[B

  The answer "" is not valid.  It must be a "y" or "n".

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)? y

  Using compiler "/ usr/bin/gcc". Environment variable CC to override.

  What is the location of the directory of C header files that match your running

  kernel? / usr/src/linux/include /usr/src/kernels/2.6.35.6-48.fc14.x86_64/include

  The directory of the kernel headers (version @@VMWARE @ UTS_RELEASE) does not match

  your kernel (version 2.6.35.6 - 48.fc14.x86_64) running.  Even if the module

  to compile successfully, it would not load into the running kernel.

  What is the location of the directory of C header files that match your running

  -

  ---

  Everyone else had this issue. The VMware - Update-implementation to date, I do not think far enough for me to use it on this. I have seen that this takes place with older additions, but I'm not sure how to go about ractifing this. Any help will be greatly appreciated.

  Thank you

  Hello

  Make sure you http://radu.cotescu.com/2010/01/19/how-to-install-vmware-server-ubuntu-fedora-opensuse/ or http://risesecurity.org/2010/04/02/vmware-server-2-0-2-update-patch-2/ in order to get VMware Server 2.0.2 working in Fedora 14.

  I'm also using Fedora 14 x 64 and used the second link (manual process) to install it.

  Kind regards

  Victor

• VMware fusion and installation of Fedora 14

  I use VMware fusion 3.1.1 on a new imac 27 "core quad 16 gig ram computer, and I am trting to install Fedora 14 as a virtual machine, using the fedora DVD i386 version.

  If I use the ISO image or a DVD image based that I get the same error came.

  Anaconda 14.22 of the fedora installation system running - please wait

  The following error was found during the analysis of the kickstart configuration file

  The following problem occurred on line 65 of the kickstart file:

  The article does not end by %% end.

  Does anyone know what I have to do--in terms of simple beginner - how to get setup to succeed?

  I reported on bugzilla

  those who say:

  Yes, vmware should start putting end % at the end of their kickstart files.

  This is a warning for the last two years, four or five versions of Fedora.

  and a version of RHEL.  It is now an error.

  So is this a case of Vmware does not solve a known problem?

  I would like to know if there is a fix I can do.

  Thank you

  sysprobs wrote:

  Yes, easy install does not work in Fedora 14 with the final product of VMware.

  I don't know that you would have downloaded correct 32 bit or 64 bit versions.

  In addition, install VMware tools is the problem here, in any case I succuessfully installed using method.

  VMware Tools on Fedora 14

  Another way to get everything working in an installation of Fedora 14 is to start here: http://download.fedoraproject.org/pub/fedora/linux/releases/14/Fedora/i386/iso/Fedora-14-i386-DVD.iso which is to halfway down the page here: http://fedoraproject.org/en/get-fedora-options#formats. You need to do a manual installation for easy install does not work. But the thing is that when you are offered the possibility of a customized installation that chosen, then install everything listed in the developer section. I suspect only a couple offered packages are needed, but not being is not an expert, I don't know which ones to Linux. However, install all packages provide what the installer seek the end of the installation tools and everything I tried works, including the shared folder.

• How I can install Fedora core 2 in my M70-159?

  I try to install Fedora Core 2 in my M70-159 laptop, but I get the message that there is no HARD disk found.
  Can any body tell me how to install fedora.

  Thank you

  Hello

  As redhawk says you get a few problems with the installation because of a SATA HDD.
  You have the right driver to install it.
  But why you don t use a different distribution of Linux such as Knoppix?
  You can use Windows XP and Linux at the same time! You n t need to install Knoppix on the HARD drive because you can boot Linux from the CD or the DVD. It works very nice to you have all options and functions.
  In my opinion, you should change your linux and try the Knoppix

  Best regads

• Windows 8 slow since upgrade to Yosemite and Fusion 7

  Hello

  I was previously running Windows 8 pro in Fusion 6 on the Mavericks. I had the computer virtual configured with 2 processors and 4 GB of RAM. The main applications that I use in Windows are:

  
  

  • Visual Studio 2013
  • SQL Server Express
  • SQL Server Management Studio
  • IIS Express
  • Google Chrome (for test and debug with Dev Tools)

  This configuration has worked completely fine, almost as good as a native Windows PC. I've recently updated to Yosemite and Fusion 7.0.1 and upgrading VMWare Tools.

  
  

  This has caused significant performance with my setup problems. More particularly:

  • The action I perform more is switching between VS2013 and Chrome (alt - tab), it was absolutely perfect and was virtually useful instant switching. Now that the same process can last between 1 and 10 seconds.
  • Chrome opening tools now takes on average about 5 seconds.
  • Doing an update of the DOM in the Chrome dev tools now takes a few seconds.
  • Attempt to inspect a DOM element (via the magnifying glass icon) now takes a few seconds.
  • Even switch between the tabs in Chrome now takes anywhere for 10 seconds, which is simply ridiculous. I never have more than about 5/6 Chrome tabs open at any time.

  
  

  All the these was practically instantaneous in the old configuration.

  All these things combined to me are totally unacceptable. Although they are all only small amounts of time on their own, when they are added together, it leads to huge amounts of frustration and ultimately of loads of useless waste of time.

  I did used to close any unnecessary background applications/services, I increased the CPU to 4 cores and 6 GB RAM. Still no significant improvement.

  To move a configuration which worked incredibly well and then supposedly "redevelopment" and end up with an installation that is considerably longer important are very frustrating. I'm hoping that someone somewhere has encountered something similar and may suggest something that I can do to make my setup get the somewhere near where it was before.

  Thank you very much

  Lee

  Stop your virtual machine and change the mode of your material from 11 to 10 and restart your virtual machine.  Your performance should be back to what you expect.  Merger has MAJOR problems with equipment of level 11.

• Drivers for GeForce FX 5200. Distribution is Fedora Core 2

  Hello
  I have the Satellite M30 941 with GeForce FX5200 graphics card. I use Fedora Core 2 on my laptop and I'm looking for drivers for this device that I can install on my pc, can you help me?
  I noticed that when I video, video scrolling becomes completely white, I see not write everything. What will be based on?

  Hello

  I don't really know about Fedore Core 2, but I also tried to install Linux on my Toshiba laptop and found after interesting sites on the net.

  http://newsletter.toshiba-tro.de/main/index.html

  and

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  The first is Toshiba Europe and here you can see the compability and driver versions.

  Maybe this could help you find a driver!

  Hans Bye

• Satellite M40-281: Fedora Core 4 does not recognize the LAN card

  Fedora Core 4 recognize everything my satellite M40-281, except for the LAN card :-(

  What can I do?

  Thanks and... Sorry for my English (I'm Italian!)

  which

  Hello

  Don t support Toshiba laptops Linux distributions. Computers laptop Toshiba are distributed and tested with the Microsoft Windows operating system.

  As far as I know, this device was shipped with Marvell based PC Express I / F LAN (I / F Marvell chip at base of PC Express I / F)
  Well, you can try glasses a bit. You might find a driver for Linux.

  In addition, the Fedora Core 4 is based on a Red Hat Linux distribution. So I recommend you to visit this site:
  http://www.redhat.com/en_US/USA/Fedora/

  Good luck

  Good bye

• Running Fedora core 6 Satego P100-10U would become very hot

  Hi all

  I run Fedora Core 6 on my laptop Satego P100-10U. But there is a problem using
  NVIDIA-Driver. After a few seconds, running Fedora laptop gets very hot.
  NVIDIA sensors show me a temperature about 100-112 degrees.
  Is there a solution, how can I fix?

  Kind regards
  Johann.

  Hello

  As you probably know Toshiba designs and publish own graphics drivers for Toshiba laptops the graphics drivers are not the same thing as the original graphic drivers of manufacturing such as nVidia or ATI graphics card!
  Graphics drivers from Toshiba are changed in order to avoid overheating of the graphics cards!

  Usually, the books don't provide any special graphics card modules but only the module cooling CPU cooling and so the laptop graphics driver controls the performance of the graphics card.

  If the temperature rises to the critical level the driver slows down the map decreases the temperature and heat production.
  Drivers Nvidia or ATI of origin don't feature such support!
  In my opinion, this is a reason why the card temperature rises to highest level!

  Attention, something like that could damage the graphics card!

• I try to download the free version of Acrobat DC at trial. An operational conflict comes up saying "Safari must be closed for the installation of Acrobat. Close and re-launch "."   I have all the accounts and restarted my Mac and still this mess

  I try to download the free version of Acrobat DC at trial. An operational conflict comes up saying "Safari must be closed for the installation of Acrobat. Close and re-launch "."

  I have all the accounts and restarted my Mac, and still this message.

  I am working on Mac 2.7 GHz intel Core i5 running OS X version 10.9.5.

  Can someone please help?

  Go to the installation, update, & subscribing to Acrobat

• Solution: WSDL shared lib error on Fedora Core 6

  When you run coldfusion on Fedora Core 6, it seemed to me to get an error whenever I tried to consume a Web service. The same scenario worked fine on my development on OS X machine but not on the FC6 machine. Read error:
  
  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: / opt/coldfusionmx7/runtime/bin/jikesw: error while loading shared libraries: libstdc ++-libc6. 1 - 1.so.2: cannot open shared object file: no such file or directory.
  
  I found a quick solution on the web that worked. The lib does not appear to be installed by FC6 and coldfusion seems to demand it instead of another version. Simply find the library libstdc ++-libc6. 1 - 1.so.2, another server, or on the web, and then copy it to: /usr/lib/libstdc++-libc6.1-1.so.2
  
  You do not need to restart coldfusion, the script should work now.

  When you run coldfusion on Fedora Core 6, it seemed to me to get an error whenever I tried to consume a Web service. The same scenario worked fine on my development on OS X machine but not on the FC6 machine. Read error:

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: / opt/coldfusionmx7/runtime/bin/jikesw: error while loading shared libraries: libstdc ++-libc6. 1 - 1.so.2: cannot open shared object file: no such file or directory.

  I found a quick solution on the web that worked. The lib does not appear to be installed by FC6 and coldfusion seems to demand it instead of another version. Simply find the library libstdc ++-libc6. 1 - 1.so.2, another server, or on the web, and then copy it to: /usr/lib/libstdc++-libc6.1-1.so.2

  You do not need to restart coldfusion, the script should work now.

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run

  Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run.

  I've been stuck here for 2 weeks

  Hi Joepompous,

  I suggest you to follow the steps in the link and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I hope this helps.

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

  trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

  Hello

  in this case, contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  or HP Support forums

  http://h30434.www3.HP.com/

  or repost in the correct forum for windows 7 that I have already advised you to do

• Can we get an example of application in CORE NATIVE and WATERFALLS in blackberry-10?

  Good day to all,

  It's too late to ask this question.

  (NOTE: I asked this question in native development Forum also, because I don't know where I have to ask myself this question.)

  I need a sample application (such as 'Hello World') for the CASCADES and CORE NATIVE, to know how to start the NATIVE application. Because when I create a sample app by choosing

  FILE > NEW > BLACKBERRY PROJECT > APPLICATION (application type) > screen/empty (I chose the language in C++), but it provides 'main.c' not the "main.cpp" and I have not a clue of how to grow a single screen according to I have to start the implementation.

  I think you all understand my problem.

  Hi all

  I get the solution here (dishooom replyed on the same question that I posted in the Native Development Forum):

  sample-application-in-CORE-NATIVE-and-CASCADES

  Thanks to dishooom.