Installation of Flash CS5.5 corrupt my CS5 Fla - could not load stage in memory. Your document may be

Similar Questions

• Flash CS5 could not load stage in memory. Your document may be damaged.

  Hi all!

  Just bought the new Flash CS5 and was eager to start my first paper. I opened a new document registered on start and then configure my basic page with only an imported graphic. Click on save and received an error message: could not load stage in memory. Your document may be damaged. When I closed and reopened the document this same error appears twice in my menu "output".

  I noticed people with many of the simular issues and don't know where to start find an answer. Any help is greatly appreciated.

  Thanks in advance,

  Biddler1

  It's just import a graphic into your file and save the file? Since you have not done much with the file, I just would say about this one, delete it and start over. But, is - this happen every time? Try different things before you save the file, as instead of importing a graphic, draw shapes of basic with the drawing tools, and save the file.

  If the problem persists, rather strange, it's either a problem installing, or your computer may not be responding the minimum requirements to run Flash.

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.

• 1721.there error is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

  Hello!
  I tried to install a copy of Symantec Corporate Edition Antivirus software but despite several attempts the software could not be installed in Windows 7 Home Basic Edition version but get error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. "
  Could someone help me out here.
  Thank you

  Hello CBhaskar,

  Thanks for posting on the Microsoft answers Forum.

  If the information of Gokul has not helped to solve your problem, then I suggest that you use the Windows Installer Cleanup tool.
  There may be a corrupt installation, you need to delete everything first.
  Click here for a link to download the utility from Microsoft.

  You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  Original title: problem with the Windows Installer Package

  I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?

  Would be - what your anti-virus program blocks scripts? See:

  Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
  http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspx

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

  Original title: DLL required for uninstall and install iTunes?
  I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

  I can't install and uninstall iTunes no matter what I do. Help, please!

   
  Hi stjimmy9999,
   
  1. are you able to install other programs on the computer?
  2. what version of iTunes you are trying to install?
  3. have you SpyCatcher program installed on the computer?
   
  Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
   
  Try these steps and check the result.
  Step 1: Download the latest version of iTunes
  a. visit http://www.apple.com/itunes/download/
  b. click on 'Download Now' and save the file to the desktop.
   
  Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
  d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
  e. click ok to apply the changes.
  f. open the file and install it.
  g. Article, follow "step 7: reset the computer to start as usual.
   
  For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
  For further assistance with this, please ask a question about iTunes Forum

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS5 don't not loading internet, installation error, then download acting funny, count on time instead of to the bottom, stuck continue

  I have a licensed copy of Photoshop CS5, I want to load on my Mac Book Pro. I have the CD but do not have a CD player.  I went to the chat and found the download.   When I tried to open it, I got the error message "Install" is damaged and can not be opened...

  I talked to Apple, which has proposed to modify the preferences to allow applications from anywhere.  I did, and the program started to load.  However, after the signing, etc. installation started running. He showed download at 10%, from 28 minutes to go.  Simply, he remained at 10%, then the minutes go continued to rise for a few hours, until it has reached more than 400.  Date to which I gave up.  It wouldn't cancel alone.  I shut down the computer, and then deleted the downloads, etc.

  So I'm from shaved again.   Chat is no longer available to help me.  I can't find this problem anywhere.  I can't call Adobe.  I have simply no idea what to do.

  There, can anyone help?

  Lauran

  Lauran you downloaded a new copy of Photoshop CS5 Extended installation files?  Retail installation files are available to Download CS5 products.  Photoshop CS5 and Photoshop CS5 Extended use the same installation files.

• Windows could not load the NLS being missing or corrupt data.

  I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.

  I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).

  Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.

  Thanks in advance for your help.

  Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:

  I set up an instance of Vista virtual machine and copied since all the
  *.nls in/Windows/System32 files and all *.fon files of the
  Windows/Fonts.  I then put on a USB key and inserted in
  the breakage of the machine.

  I didn't know that this WindowsRE could read USB drives. It does things
  easier. I then crushed the files on the area damaged with those of the
  clean installation and a reboot took me directly in Vista.

  If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.

  Let's see how these options work before considering anything else.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not load the 3.6 - disk image could not mount - reason: corrupted image

  Tried to load 3.6 and get the msg: disk image could not climb. Reason: image corrupt.

  This has happened

  Each time Firefox opened

  Versions of Firefox 3.0 + need Mac OS x 10.4 or higher.
  What version do you have?

• Windows could not load the installer for the display

  Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:

  Do you have downloaded screensavers, etc...

  1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".
  Select ' Yes, "I have already connected the hardware" > click "next".
  Find and click on your device and click "next".
  If a driver is necessary, it should have with your hard drive.
  You can select "Disk" and load the driver from there.
   
  If successful, go no further
   
  (2) when you install new video drivers
  Uninstall the old ones
  Restart in vga mode
  disable a / v
  Install new drivers
  Reset
   
  If successful, no further
   
  (3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.
  Retry installation
   

• Erroe Code 1720: There is a problem with this Windows Installer package. A script required for this intall could not be executed.

  I have Windows Vista with Service Pack 2 installed on my system.  I am trying to install a small program.  The installation process starts, but soon, I get the following error message: Error 1720: there is a problem with this Windows Installer package.  A script required for this intall to complete could not be run...  How can I solve this problem?

  Try the steps mentioned in the answers marked by kmlure and Imran Chand at the following link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1720-there-is-a-problem-with-this-windows/0b965fe8-2d16-498c-bb88-395911e13146

  If you have downloaded the program, you can try to download it again or check if there is a different place, you can download it since the file itself is not the problem.

• Windows could not load the installer of the image. Help please!

  My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.

  Thank you

  John

  Hello

  Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Install the latest version of DirectX on your computer.

  Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
  (http://support.microsoft.com/kb/179113/ ) How to download and install DirectX

  (http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool

  Step 3: You can also delete the upper and lower of your registry filters and check if it works.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, locate and then click the registry key under:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

• Downsaving a Flash CS5 .fla in CS3 format

  Is there a way to do this in CS5? Recording in a CS3 format was quite simple in CS4 but CS5 doesn't seem to have the option as far as I can tell.

  You can save back a version in any version of Flash, so you would need save a file CS4 then allows to save to a file of CS3 CS4.

• AIR works in debug flash CS5, but does not stand-alone.

  I have an application that uses the following code to access an XML file.

  var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

  var fileStream = new FileStream();

  fileStream.open (file, FileMode.READ);

  var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

  fileStream.close ();

  read soldout setting

  trace ("XML =", configXML);

  If (configXML.soldoutEnable == 'ON')

  soEnabled = true;

  on the other

  soEnabled = false;

  It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

  I am running CS5, AIR 2 on windows XP. Thank you.

  This forum is using the AIR, not any other type of AIR application. Looks like you have a different type of AIR application. I think you might want to try the regular AIR (probably listed under Flex) forum.

  Becky Williams

  -Sent from my Palm Pre

  August 7, 2010 10:48, farmerInCS5 <[email protected]> wrote:

  I have an application that uses the following code to access an XML file.

  var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

  var fileStream = new FileStream();

  fileStream.open (file, FileMode.READ);

  var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

  fileStream.close ();

  read soldout setting

  trace ("XML =", configXML);

  If (configXML.soldoutEnable == 'ON')

  soEnabled = true;

  on the other

  soEnabled = false;

  It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

  I am running CS5, AIR 2 on windows XP. Thank you.

• Installation of flash player dies at 33% lost connection, can not reconnect

  WinXP

  Tried FF, IE, Chrome.

  Tried to uninstall, clear cache close all browsers

  Tried to download the NPAPI to install direct link (still trying to download after 5ish minutes)

  Whenever I get the same result; It downloads, start installation then loses connection and cannot reconnect.

  Help!   Please, I beg you.

  Hello

  The installer of the hold (as indicated by the screenshots) downloads / installs Flash Player silent mode.  Connection/network latency problems can lead to lost connection.  The full download installers the entirety of the original file and launched once do not make any other downloads in the background.  If you encounter connection/network latency problems, please try to download the full installation programs displayed at the bottom of the of installation problems. Flash Player | Windows page, in the section "problems".

  --

  Maria