Installation of fron a hard drive

Similar Questions

• Satellite Pro L650: Windows could not complete the installation on the new HARD drive

  At the present time, I have a 500 GB HARD drive installed. As soon as I got it, I did a recovery on 3 DVD media.

  I just tried to replace the HARD drive with a 1 to one. All copied OK and after dvd 3 that I was told to release the dvd. I did this and the computer turns off. I turned it on and it started to (don't remember the exact words used) set the drivers.

  However I have now received the message that "Windows cannot complete installation" and telling me to reinstall. I did it, but after the steps above have repeated the same message appears.

  Pls help.

  I don't see why my computer should be limited to a 500 GB HARD drive.

  Thank you

  Hello

  The computer is NOT limited to 500 GB HARD drive
  You can use more big 500 GB hard drives. You have confirmed that the laptop supports 1 TB HARD drive and the system recognizes the 1 TB HARD drive.

  The problem could be the use of the recovery diskette. Why?
  Because the recovery disk creates the same partitions that were available on the 500 GB HARD drive. This could create problems of system due to the large size of HARD drive.

  Solutions?
  Well, I think that you could install the system by using the clean installation of Microsoft Windows disk.
  Missing other drivers or tools can be downloaded from Toshiba page.

• Satellite A110 installs recovery disk but HARD DRIVE not displayed

  Hi guys,.

  After searching the net, I finally found a forum in which I hope you can help me.
  I tried to search this forum for an answer but couldn't find him.

  I have a toshiba satellite a110-159, who, after a setback, did not start.
  CHKDSK discovered many problems when I plugged the hard drive to another pc, but the laptop could not even boot from the disc.

  Anyway, I copied the most important data and back up the disk in the laptop. with product recovery center of disks that I was able to reinstall windows xp installation support, but after the first reboot, the laptopt did not find the hard drive, it is not displayed in the bios.

  strange, although the recovery disks installed... anyone know how REList the hard drive in the bios? It has been listed here before reinstalling windows xp mc...:(donc c'est comme il a fait quelque chose avec le bios ou presque.)

  hope you guys know what is the problem with this one.
  thnx in advance!

  Edit:
  the drive is accessible when it is placed in another system of system or desktop with converter and copy and works very well.

  What makes you look very risky!
  You are lucky that your laptop still works...

  I would not recommend doing so. If you want to set the BIOS to factory settings then set the defaults in the BIOS settings.

  In any case thanks for your comments

• A new XP installation will wipe the hard drive first? (currently linex os)

  Little girl had PC at College «friend installed Linex.» I now PC New Testament new XP install first remove the hard drive? (desired)

  Yes.

  Do you need help to make the installation and the subsequent update?  What type of installation media?

• where are my drivers? new installation on the new hard drive

  I have a dimension e510, I put in a new hard drive. I got the windows xp disk, I added when I bought the computer. In general, the hard drive is partitioned or something with the operating system on the hard disk of windows xp.

  In any case after I installed widows xp, everything works except that I have the yellow question mark by 'other devices', I noticed that when I tried this computer with my main computer of the network. All of the devices under the heading other have no driver video Ethernet, PCi, for example - video works as I have a video card.

  So I tried to install the drivers and windows is unable to find them. I still have the installation disc into the computer. Being one of the drivers for the Ethernet - i cannot access the internet to get drivers. Help

  OK, I found the drivers on the dell site. I was able to install or update several drivers that I didn't need. the pilot opne I need comes in a cab file inpenuxp.cab.  Where do I put this? I've tried several things that work. When I low laoded the other driver of dell updtates, they all seemed different and they are all installed without problem

  Hello

  You will need to download "Intel PRO/100 VE Network Connection " of Dell on a USB key and install the driver for your Netbook have access to the internet.

  A CAB file is a ZIP , CAB file is just the Microsoft format for a compressed folder save bandwidth on their server they save as aCAB , you can open and then select all and extract here where the files need. For the most part, these files will file dell cascading, images and Html pages.

  Try to download the network card in your computer to get the correct driver installed for your problem.

  NASS - http://www.nasstec.co.uk

• Correct installation of the new hard drive for Windows 7

  Have a disk hard fatal crash with Dell OEM Windows 7on, so I bought a new hard drive compatible system and have my old system Win 7/recovery of data on a memory stick. It's been years that last I formatted, partitioned and installed an operating system on a new hard drive and I totally forgot how it's done. Vaguely remember some DOS commands were required to work out of BIOS (?). Can anyone list the individual measures to be taken, assuming that the hard drive is physically installed and turned on? It would be a great help!

  Unless this stick memory has on her installation files as well, you cannot reinstall win7 on the new hard drive

  You will need the DVD / or the ISO of Win7.

  ]

  And no you do not need BACK. Just the dvd or ISO / to boot from. Then you can format / partition in the configuration screen

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• Software installation CD, recognizes not hard drive not labeled C:\

  My hard drive is called I:\.  The installation cd has not recognized this and will not install the software.  How can I get the installation program to recognize the hard drive?

  In my view, that it is a limitation of the software installer. We have downloadable versions, but to the best of my memory, even they do not give a location prompt.

  Message relates to: None

• How do I download an another CC for installation on a new hard drive? Old is dead and has been replaced, but I'm starting to any operating system.

  My CC number 1 installation went with the old, is crushed, hard drive. Installation of number 2 is on laptop. How can I download another copy for the new drive?

  Hello

  Please use the following link to download the Adobe Creative Cloud Desktop application: Download Adobe Creative Cloud apps | CC free trial Adobe

  See also,

  Download and install Adobe Creative Cloud apps

  Connect and disconnect activate Cloud Creative applications

  Download and install the non - trial apps Creative Cloud

  Let us know if that helps.

  Kind regards

  Bani

• How can I turn off the Flash Builder AFTER improvement of the system or the installation of new equipment (hard drive)?

  When a machine with an installation of Flashbuilder falls down or is deleted, or when a hard drive is replaced etc. I have not found a way to obtain the active disabled menu again... If this activation is lost forever?

  I got a chat with Adobe support and they released my account! Indeed, it is impossible that ca do you it yourself.

• What to do next after the installation of the new hard drive.

  I just finished installing a new hard drive in my HP Pavilion dv4-2049us laptop computer Windows 7. What should I do to get the operational computer then?

  for example I have to re - install Windows 7 from the disc? Or, do I have to use a disc of "Boot"?  BTW, what is a boot disk?

  Hello

  Please try this: in the first screen, select internal CD/DVD and press F10 to save the configuration. You will need to switch it to HARD disk after loading the operating system on your machine.

  Kind regards.

• Installation of a second hard drive in an HP DC7800 Tower

  I am installing a second hard drive in this PC.  Here now, the drive in seems to have bit sockets rubber screwed onto the side of the disc.  These rings slide into the slots in the area of the disc hard turn... anyone know where I could get these little pads?  You can not install the drive without those crossings.  The service rep has no idea what I was talking about.

  tecbal,

  According to the maintenance manual, extra screws are provided for mounting the 2nd disc, see Figure 2-19

  Extra Hard Drive isolation Guide screw http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162202/c01162202.pdf location

• Satellite A50 432 - installation on a new HARD drive recovery DVDs

  I have an A50-432 and the HARD drive has failed. I was able to install the DVD of recovery on the old HARD drive using the Q: drive prompt. But when the new HARD drive is installed it does not recognize the new HARD drive as a destination.

  How can I install a new HARD drive recovery DVD?

  Hello!

  Have you checked the BIOS if the new HARD drive is recognized properly?
  Maybe the new drive HARD isn t working properly and if the BIOS doesn't recognize it. Then you are also not able to install the disc of recovery on this subject.

  Normally, you only have to boot from the recovery disc and follow the instructions on the screen. All that s.

  Good bye

• Installation of the 2nd hard drive internal

  I have a HP Pavilion a6750y, with an internal hard drive and a LightScribe DVD Super Multi burner.  The system is running Windows 7 Ultimate 64 - bit, with 8 GB of RAM.

  I want to install a 2nd internal hard drive... If all goes well.

  The original hard drive goes SATA1 on the motherboard.

  The DVD player will SATA2 on the motherboard.

  So, obviously, I chose SATA3 on the motherboard to connect my cable purchased and only plugged SATA 2nd hard disk.  So far so good.  Now the problem...

  I did not know that the SATA drives have a power connector different than the old records.  So, a single SATA power connector goes to the original drive and the other for the DVD player.  There is no third party.

  All other power connectors are old white 4 holes plastic ones.  And like 5 of them.

  If I'm screwed?  How can I get another SATA power connector?  Are there adapters that connect to the 'old' white maybe?

  Or do I have to buy a new power supply with 3 SATA connectors on this subject?

  Thanks for our help.

  -Mike

  Hi Mike,.

  All you need is an adapter like the one on the link below.

  http://www.Amazon.com/Connectland-CL-CAB40021-Molex-power-cable/DP/B003L5D0OE/ref=pd_cp_e_0

  Kind regards

  DP - K

• I need a replacement CD of XP Home for a new installation on a new hard drive.

  My old hard drive failed and I replaced it. I have the product key still on the Tower, but loses the original XP came with the pc disks.  Is there somewhere I can download XP home or should I buy the CD?

  Hi SarahMowery,

  I suggest you follow the article in the Knowledge Base Microsoft for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

  I hope this helps.