Installation of new Wd Hardrive window problem

Similar Questions

• Can I make a new installation on new hardware with Windows 8 Pro OEM?

  But seriously, I have a new MB that I need to use as there is a problem with my Chipet a PCB there is some problem with power. I have not really but it's a mess now of working with and I bought a copy of Windows 8 pro OEM System builder and I made sure that if reason I could use the liscence to win 8 OEm on new hardware store and this Orginal Statemant of Microsoft saying it's fine as long as it's only on a PC. Although I found many threads say otherwise and win 8 OEM is not transferable, as are all the Windows OEM. So I ask you once again so I can have a PC is able to install on new hardware?

  Original title: fishing trolling warn... Can I make a new installation on new hardware with Windows 8 Pro OEM?

  Windows 8 Pro OEM System Builder has rights of transfer, then Yes, you can move it to a new computer or the motherboard.

  http://personaluselicense.windows.com/en-US/default.aspx,

  "Can I transfer the software to another computer or user?

  You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• Problems accessing the HP Recovery Manager after the installation of new copy of Windows 7.

  I have the HP Pavilion dv6 (2043us) originally with Windows 7 Home Premium. A recent storm crossed in my area, which seems to me to be the cause of a corrupt hard drive file that prevented Windows startup. My extra fathers using copy of Windows 7 Ultimate (is a prominent IT guy for his company, he has a lot to lose) I decided to install it from that rather than using the HP Recovery Manager in order to save my files (Windows Startup Repair and system restore failed, and to restore the default factory was not desirable) as I mentioned it because of my desire to save my documents) I have installed on the same partition as the original windows, allowing files to be viewed in Windows.old.

  However, after all that, I came to the will to restore the default settings. However, after you press (esc) and (f11) to access the Recovery Manager, it is bring up the Windows Startup logo and the login screen. Is it possible to access the Recovery Manager and restore the default settings? If so, how should I do this? As I said, I left all the original parts intact, so I do not think it is possible after some research, but I'm not sure how to start the process.

  This method to get the active recovery partition was first introduced to me by Cheryl here on the site. It may or may not work.

  Right-click on computer and click Manage > search in the list on the left, and then open disk management. You should see the recovery partition it. Click right and whether it is active and the next time that you start it up, it should boot into the recovery partition and restore back to the factory.

• Installation of new fees for windows vista

  Hi guys!

  When I get off of my PC from vista to XP. I decided to put it back on the pre-installed Windows version. But when I put the installation CD, I could not start in it because this internet message would not appear "press any key to start from the CD or DVD.

  I've tried everything as follows:

  I put it the CD in the boot order in the BIOS and CMOS.

  I pressed the button that says "press F11 to start on a device.

  I tried to put it on my friend's PC

  ETC.

  The second step that I need to press is showing a list of the devices listed my CDROM, but it does not work either!

  Any help will be appreciated.

  :)

  You can not 'borrow' license to someone else.

  If the computer/laptop comes with the preinstalled Windows operating system (Dell, HP, Acer, etc.) or is licensed to OEM System Builders, that the product key that came with the computer/laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) and the license OEM System Builders are related to the first machine it is installed on and dies when machine who dies.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  See you soon.

• Printer installation 6515 new computer with Windows 8

  I recently bought a new computer HP Slimline Pavilian 400 and already have a printer HP 6515.  When I tried to install using the disc, I got a message that says my computer needs to be updated because this disc is for Vista and Windows 7.

  What can I do to install the printer I already own?

  Thank you-

  Sheila

  Hello

  Please download the following file, save to your computer (remember where):

  http://ftp.HP.com/pub/softlib/software12/COL39526/MP-108880-4/PS6510_1315-1.exe

  Right-click on the file you downloaded above and select run as administrator.

  Kind regards.

• Problem with the Installation of JAVA in my new Dell running Windows 7

  Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

  "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

  Then "Java update fails to apply the changes to your system."

  Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

  Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

  Hi Betty48228,

  Here's how to solve your problem:
  (1) uninstall all versions of Java.
  (2) the uninstall will probably fail. If so, get Revo Uninstaller free http://www.revouninstaller.com/revo_uninstaller_free_download.htmland uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
  (3) reinstall Java: http://java.com/en/download/

• I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Br

  I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Bren

  Versions of Windows beyond Windows XP are not entirely compatible with Acrobat 6. The first version of Acrobat that is supported by Windows 7 is Acrobat 8.1 (is no longer licensed by Adobe). The latest version of Acrobat: Acrobat Columbia, six versions more recent than Acrobat 6. You need to upgrade to get all the features of Acrobat.

  -Dov

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• HP all-in-one 5610 model: All in One 5610, problem loading new software for Windows 8.1

  Hi, just bought new HP computer with 8.1 widows, my all-in-one 5610 has been working fine on the old Windows XP.  Installation of new software 8.1 system HP I get unknown device (configuration descriptor request failed). As for the USB controller get Windows has stopped this device because it has reported problems Code 43. Thnks for any help you can give.

  Hi @Joe62 and welcome to the Forums of HP!

  I understand that you get code 43 error. I'd be happy to help you!

  I recommend to check this page from Microsoft on Code 43: Windows has stopped this device because it has reported problems.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How can I do an update instead of a new installation if you are using Windows Anytime Upgrade from Vista Home Premium, Vista Ultimate?

  I have a server at home, but one of my main computers cannot remotely access because it is running Vista Home Premium.  As a result, I bought a Pack anytime upgrade to upgrade to Vista Ultimate.
  When I ran the installer, it downloaded updates to update and then opens a screen where the options are updated or install fresh.  However, the update option is grayed out and there is a message at the bottom of the screen saying that if I want I must must upgrade to a newer version of Windows.
  A new facility is out of the question for me.  I'm almost 2 years of work on the machine and it is set as I want.  I have a few training licenses, I don't think I'd be able to reinstall it.  Besides, I don't want to spend days and days software and reconfigure my system.
  I have a Windows 7 Ultimate machine, but I want to leave this machine as a Vista machine.  At I throw my money on the upgrade pack or is there someway around this problem?

  Looking for a difference in numbers/Service Pack levels.

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to swap the disk to upgrade to a later version that includes the missing Service Pack.

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  Run the upgrade of a Vista operating system

  See you soon. Mick Murphy - Microsoft partner

• Windows Installer + VSS + Windows problems in Windows 7 SP1 Activation

  I used this Windows 7 machine for 5 years now and has recently encountered several problems, which probably are closely linked:

  1. Windows installation problem
  Can't update programs, although new install if they do need Windows Installer to do. Most but not all Windows not updates install.

  2. the problem of volume shadow copy Service

  Failed to create system restore points. With VSS errors appear when I try to do. No previous restore point is available.

  3. Activation of Windows problem
  A pop up keeps appearing every 1 or 2 hours, saying that my computer is not running genuine Windows. Obviously nonsense since this PC was bought during the original Service Pack 1 of Windows 7 and I've never had a problem before.

  I searched a lot online to solve all these problems. I tried hundreds of possible solutions, but nothing has worked. I think that it is all caused by the same thing, but I am unable to find it.

  Ready to provide more information. Thanks in advance.

  (PS: my camera has a pre installed Windows 7 so I own not a Windows DVD, don't want to reinstall the OS, prefer to try to find the cause of the mess)

  Do you have same problems if you create a new user account?

  What Antivirus utility you installed?

  Have you installed a new hardware or software or both since you started these problems?

  Could you describe some of the thing things you've tried?

  Start by checking your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can also try to perform a repair upgrade to see if it works. You need to download a copy of the edition of so that your system is under license:

  Download Windows 10, 8, 7 ISOs

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-ISO-download-tool

  then

  How to make an upgrade of the repair - Notebooks.com

• Windows installation fails due to hard drive problems

  I am trying to install windows on a laptop computer of friends who, for some reason, I'm not has no OS

  The disk hard would not appear first during the ride selection for installation showing everything missing drivers so I called a friend and he directed me to change the sata controller mode, so I changed it from AHCI to compatibility, what makes the hardrive appear when selecting disk installation in unallocated space , but windows says that it cannot install on the selected disk and that the hardware may not support this disc .then start I checked online and found a lot of options in the resolution of this problem that no working example; Clean all the diskpart commands, creating a primary partition with gparted, using dban.

  I checked my memory with the memory test gparted, but it turns out its OK

  So should what steps I take to solve this problem?

  You should seriously consider replacing the drive.  They are not that expensive and with all the work and all the time you're put everything in there, perhaps worth.

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Have a new computer running Windows 7. Microsoft 4000 wireless mobile mouse: left click does not work, can not solve the problem.

  Have a new laptop with Windows 7, ASUS Intel-i5. Initially, the automatic installation of my Wireless mobile mouse 4000, which I had used with XP, has worked. Only problem was that the mouse was stubborn, when you attempt to left click: i.e. get something - and persistence was needed to get there. Now I can not at all to a left click. Tried all resolution of known issues, left click procedures still dead in the water.

  Anything with moving parts end up by wears.  I've had several byte the dust.  Speaking of the dust, maybe the dust and mold were inside.  Invest $4 and find out.

• How to make windows require a password during the installation of new programs?

  How to make windows require a password during the installation of new programs?

  Hello

  You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account.  If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.

  However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.

  Let me know if I can help you with this question or any problem related to Windows.