Installation of Office 7 of 11 flow HP disk

Similar Questions

• After the installation of Office 2003, Word hangs on a Tecra A3

  Hello

  On my Toshiba Tecra A3 (1.86 GHz Pentium, 1 GB RAM) I had until yesterday Office 2000 it emits the ideal way.
  Now, I installed Office 2003 and I am unable to work with Word.

  The program hangs on each file that contains a single piece of simple photo or clip art. I can't believe it. A re-setup of Word did not help. Now, I installed again in parallel Word 2000 and it works flawless.

  THX if someone can give an opinion

  Antonio Giarrusso

  Hello

  You must perform a new installation of Office 2003.
  First remove all files and the former software office 2000 registry keys and then perform a new installation.
  After the installation of Microsoft Office 2003 Download all patches and updates on the Microsoft site.
  The use of the CCleaner is very useful, because this tool checks the programs and the entries in the registry for certain shortcomings

• -Error code 646 - repeated the failures (now for the last two months) to install updates Windows 7 S/W, possibly after installation of Office 2010?

  For the last two months - easrly November, when stopped down, I saw 10 message updates are being installed. This follow-up installation of Office 2010 (download from Web site), who bought Office 2007 earlier this year, and by choosing to take the free update promised for 2010.

  On the control, I find that whenever all ten updates failed to install (error code 646)

  Concered updates are KB2202188; KB982726; KB2289161; KB2289078; KB2413186;  for Office 2010

  and KB2345000 - Word 20120.

  KB2409055 - 2010 Editor;

  KB2289116 - Social connector;

  KB2431831 - knitting 9;

  KB2433299 A Note;

  Any thoughts there?

  Steve L

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Error (re) installation of office 2003 on XP after update failed

  The security update for office 2003 on my XP (SP3) kept failing throughout the last week. I contacted the support of MS PC security by phone and I was transferred from the Department the installation program office at Department of update of security for customer service. And none of them had no idea of what is the problem. I followed some other technique posted on the web for the same question and tried to uninstall office 2003 and re - install. However my new installation of office 2003 meets the following error (same error I got when I tried to apply the security updates) "error 2932: an internal error has occurred." (C:\WINDOWS\Installer\{91E30409-6000-11D3-8CFE-0150048383C9)\graph.ico 131) Contact the Services de Support technique Microsoft (PSS) for assistance. "After this installer rolls back all the facilities. Now I find myself with no office 2003 (I tried office 2007 install with the same result). I would really appreciate it if other users can help you with a fix for this or MS support engineer. My desktop is hp pavilion PC under XP (SP3).

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/66c6f49f-0494-4db0-8dbd-d8deeec121e1] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• stuck on the installation of office 2010 system restore

  Aspire 5250-0810 pasted on the restoration of the system installation of office 2010, can anyone help

  delete old partitions while leaving the single factory restore partition. restarted right in the eyes of this morning and restoring factory awake blearily rejoiced that she had went normally. lit it is fast and bouncy and looked at the level of the office. I had done it. w/o pulling the battery cmos.

• I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and have to pay for the installation of creative cloud

  I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and will pay for the installation of creative cloud. What should I do?

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• Default installation of Office 2007 service pack 2

  While trying to install Office 2007 service pack 2, it keeps failing and displays the code error 0x8024002D. Any suggestions?

  While trying to install Office 2007 service pack 2, it keeps failing and displays the code error 0x8024002D. Any suggestions?

  Means - a patch full-file failed because the source was necessary

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=Office+2007+SP2&displaylang=en&sType=s_basic

  Provide the installation media or download the full SP2 and try to install the update.

  If you download the full SP2, you can burn disc and reuse if you ever need to reinstall Office.

  K TaurArian [MVP] 2005-2010 - Update Services

• Error during installation of Office home and Student 2007

  Hi evryone,

  When you try to install my Office 2007 family and student I still get the following error message: Error 1935. An error occurred during the installation of Assembly component {FAB10E66-B22C-4274-8647-7CA1BA5EF30F} HRESULT:0 x 80070005.

  Can anyone help?
  Thank you very much.

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows XP SP3 - installation of Office 2007 trial version - Windows Installer 3.1 fails to load. Manual loading of Windows Installer 3.1 not successful due to advanced SP3 Installer. Is there a workaround to allow the installation of Office 2007? __

  Windows XP SP3
  Windows Installer 3.1 - manual install requirement to install Office 2007 trial download

  Hi Wendell19

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installation of Office on a netbook

  I have Office 2007 Home and Student, allowing installation on 3 machines.  Right now I don't have it on my main computer (Vista Home Premium) but I would like to install it on a small Asus 1000he netbook (XP) I bought last week.   However, I can't install directly from the disc because the netbook is not an optical drive.  Is it possible to do other than to go out and buy an external hard drive?

  Can I download and install the free trial 60 days and activate it using the code of my package?   Or the trial version would reject a retail code?

  See you soon,.
  Elizabeth

  Hello Aluluei,

  Thanks for posting on the Microsoft answers Community Forum.

  It can be done by getting the trial version.  I had this meathod although the opposite effect on me.  It still works in the end, but you don't have to call Activation.

  The best way for you, if it's possible, is to share the optical drive of a computer and the other have access.  This of course depends on whether or not they can talk to each other.  So if they use the same router out of the internet and both have the same name of group to work and then on the PC with the optical drive, you could go to explore and right-click on the list for the optical drive and click 'Share' and choose "Everyone" to have rights on the disk.  This is done in the facility.  It leaves the reader somewhat vulnerable so you can stop sharing once we are done or specify the user on the other machine and am not to "everyone".  Either once shared go on the other machine and click on 'Start' and in the field of research at the bottom of the menu type in

  \\computer1\d where "Computer1" is the name of the computer with the shared optical drive and "d" is the common name of the player

  Then you should be able to install using the player on the other machine.

  Please post with the results.

  Thank you
  Jonathan

• Windows Installer crashes Office opening

  How to stop the installation program opens. The office program is already installed and works very well. It takes 5-7 minutes so he can go and I can start to work in Word.

  Hi Princofkc,

  • This only happens when opening Office application?
  • What exactly happens when you try to open the Microsoft Office application?

  You can unsubscribe and reregister the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click onrun.
  (b) in the Open box, typemsiexec /unreg and then press ENTER.
  (c) in the Start menu, clickrun.
  (d) in the Open box, typemsiexec/regserver, and then press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Office Professional 2007

  Hi all

  OK, it's just a check

  I installed Office Professional 207 on my PC and the new generation, the new install of Win 7, all with Office 2007 so far seems OK.

  However the odd thing is that when installing it counts only disc one & without any point during the application installation using the drive in two.

  Is this normal?

  If so, why have two disk?

  Thank you

  Confused.com

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Boot installer microsoft Office 2007 has stopped working

  I am trying to reinstall Office 2007 on Vista after I replace my HDD ' cos my old one failed. When I run the installer, I get a message saying that the bootstrapper has stopped working. I got the same message on the original installation, but forgot how to solve this problem. Someone help me please. I looked in the Web site of the office, but there is nothing on the bootstrapper, and I am not spending $70 + on a phone call

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of Office home and Student 2007 on the current computer with Windows Vista

  Why I can't install this program on my current computer which has Windows Vista Home Premium?  It will so far, and then this prompt appears, the program Setup cannot find HomeStudentr.ww\HomeSrww.cab.  Browse to a valid installation source and then click ok.  Where is this HomeStudentr.ww\HomeSRww.cab?  What and where can I find a valid installation source?

  What I have to do a clean boot on my computer before you install Office home and Student 2007?

  Hi JERRY HOOPER,

  We encounter this error message if the installation disc is corrupt. I suggest you try to copy the contents of the Microsoft Office disk on the hard drive and launch the installation from there. You can delete these files once the installation is complete.

  You can refer to this article How to troubleshoot issues that may occur when you try to install a 2007 Office system from the system Office 2007 CD or DVD program
  Given that the question you posted is related to Microsoft Office and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want. http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Visual Studio 2010 Tools for the Installation of Office Runtime failure

  Hello

  the installation fails with the error code 1601. I studied this code but received no responses that could solve my problem. complete logs are pasted below. any help it will be appreciated.

  The following properties have been defined:
  Property: [AdminUser] = true {boolean}
  Property: [InstallMode] = {string} SameSite
  Property: [NTProductType] = 1 {int}
  Property: [ProcessorArchitecture] = {string} AMD64
  Property: [VersionNT] = 6.1.1 {version}
  Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BuildList
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
  Read the string value "10.0.40820".
  "Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
  Failed to read the registry value
  Do not set value for the property "VSTORuntimeVersionInstalled".
  The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
  Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
  Execution of the command controls 'VSTOR401\vstor_redist.exe '.
  Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
  Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
  Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
  Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
  "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
  EULA for components "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" has been accepted.
  Copying files to the temporary directory 'C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\ '.
  Copy "C:\Users\rchand02\Downloads\UnifyOffice_x86\VSTOR401\vstor_redist.exe" to "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe".
  Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
  WinVerifyTrust returned 0
  Trust file
  Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BeforePackage
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
  Read the string value "10.0.40820".
  "Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
  Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
  Failed to read the registry value
  Do not set value for the property "VSTORuntimeVersionInstalled".
  The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
  Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
  Execution of the command controls 'VSTOR401\vstor_redist.exe '.
  Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
  Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
  Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
  Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
  "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
  Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
  WinVerifyTrust returned 0
  Trust file
  Installation using the command "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe" and «/q /norestart» parameters
  Process came out with code 1601
  Status of the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" after the installation is "InstallFailed".

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it