Installation of Oracle DB on 64-bit computer

Similar Questions

• installation of Oracle 11 g from another computer

  Hello
  
  I ve got a laptop with xp and Putty and your desktop with suse 11.1 and the Oracle11g decompressed installation program. I would like to install it, but through the laptop (the office has a monitor). But there is a problem with the DISPLAY variable.
  
  I give to the PuTTY, the X 11 IP of the laptop, but it does not work.
  
  Any idea?
  
  Thank you.

  For areas without head of Linux and Solaris, a Variant I use a lot: start a VNC server on the vncviewer and SuSE box run under Windows.

  Log on to the Linux machine and see if you have installed the VNC server. (Do it as the owner s/w). Easy way is to simply start the VNC server by typing (on the command-line) VNC server. (Close, "Server VNC-kill:?" where? is the commissioning number.)

  If it is there, get and launch vncviewer. (I usually use viewers TightVNC or UltraVNC - both are free). You will need get the right port based on the configuration of the server.

  If not that, then I can use Xming (preferred) or CygWin / X - both available on the net.

• Oracle UCM 11 g Installation on 64-bit computer requires JDK

  Hello

  I try to install ECM suite 11 g desktop 64-bit windows 7.

  To install the WebLogic Server on 64-bit computer supported JDK must be installed first in the system.

  On a Windows operating system, the JDK must be installed in a directory without spaces in the path of directory (not under the \Program Files directory).

  Can any body help me out to know:

  1. What is JDK support for windows 7 64 bit m/c?

  2. I have installed JRE, but can not find JDK anywhere... What do I do now? If I need to download, how can I download and installed?

  It is very important to have the JDK. Help, please.

  Thank you

  Sunil

  Hi Sunil,

  Links to download JDK and its installation steps are:

  Java SE - downloads | Oracle Technology Network | Oracle

  Installation notes

  I hope this helps.

  Thank you

  Srinath

• Installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS

  Hi all

  Hope you are all very well...

  Could you please help me because I am looking for a document (installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS)... as I already searched and found a lot of documents, but all are more detailed, and others are for the installation of single node...

  What I need is to set up 12.2 RAC ASM environment on two 2 knots... So, could you please help me.

  Your support will be much appreciated...

  Kind regards

  Mohammed

  Hi Mohammed,.

  1. Yes, you could. You can also see "Section 3: install the software from the Oracle 11 g 2 Cluster" (Doc ID 1453213.1)

  2 oracle eBusiness Suite Installation and upgrade to version 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1)

  For the installation of CRS, please visit http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_clusterware

  Thank you

  Hussein

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• OLIVIER Installation on Oracle - Linux 64-bit

  Hello
  
  I want to install OBIA 7963 on Linux server, actually I installed the software on Linux below but did not find installable for OBIA7963
  
  (1) oracle Database 11 g
  (2) Informatica 9.0.1
  (3) CAD
  (4) REGIONAL COORDINATION UNIT
  (5) OBIEE 11 g
  
  And I made the acquaintance of this forum we need to copy files from a windows machine to Linux file.
  
  Please let me know what file I need to copy the files from the server in the window and what files on Linux server I have to past these files under Linux
  
  Thank you
  Atul

  If you read the link you can not ask this question again.

  You must use the EM to the RPD and webcat.

  INFA ORACLE_HOME\biapps\dwrep\Informatica\Repository Rep
  TO:
  INFA_HOME\server\infa_shared\Backup

  Copy the following source files:
  From:
  ORACLE_HOME\biapps\dwrep\Informatica\SrcFiles on the computer where the installation of Oracle's Applications of BI program was executed.
  TO:
  INFA_HOME\server\infa_shared\SrcFiles

  Copy the files to search:
  From:
  ORACLE_HOME\biapps\dwrep\Informatica\LkpFiles on the computer where the installation of Oracle's Applications of BI program was executed.
  TO:
  INFA_HOME\server\infa_shared\LkpFiles.

  Export directory
  ORACLE_HOME\biapps\dwrep\dac_metadata\dac_client\export
  TO
  Copy the contents of the export directory to the DAC_HOME\dac\export directory on the machine hosting the Client CAD.

  If you have questions read given the link

  I appreciate if you check the correct option.

• run a 32-bit Installer on a 64-bit computer

  run a 32-bit c and d install program on a 64-bit computer

  You can install a program 32 on a machine with a 64-bit operating system, but the 32-bit drivers won't work on a 64-bit operating system.  Alternatively, you can install a 32-bit OS on 64-bit hardware.

• error during installation of Oracle Grid Infrastructure Oracle Linux 6.2 64-bit

  I am new to the Installation of Oracle RAC. I try to install Oracle RAC on vmware 11R2.  I checked all prerequisites so far and I'm sure I went through all the components mentioned in the documents of the Oracle. It doesn't matter what I do, here is the error. Do not know how to solve. Please help me.

  ID@racnode2 Desktop] $ cd/u02/linux_11gR2_grid/grid /.

  [grid@racnode2 grid] $. / runInstaller

  From Oracle Universal Installer...

  Check the Temp space: must be greater than 80 MB.   Real 29000 MB

  Past

  Check the swap space: must be greater than 150 MB.   Real 2999 MB

  Past

  Monitor: must be configured to display at least 256 colors.    16777216 real past

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2013-09-22_04-04-10 AM. Please wait...

  [grid@racnode2 grid] $ Exception in thread "main" java.lang.UnsatisfiedLinkError:

  /tmp/OraInstall2013-09-22_04-04-10AM/JDK/JRE/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: no such file or directory

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)

  at java.lang.Runtime.load0

  .............................

  ...............................

  ..............................

  Hi Harold,.

  You have the OS installation CD, if so go to the packages directory and you will find the RPM that I mentioned.

  If you do not have the CD of the OS, then get the number of link:

  http://public-yum.Oracle.com/repo/OracleLinux/OL6/2/base/x86_64/

  Thank you &

  Best regards

• Must install 32 bit OBI 11.1.1.5 on windows 64-bit computer

  Hello
  
  I'm trying to install 32-bit BI 11.1.1.5 on 64-bit windows server 2003, but its projection upward a message that this software requires 32-bit computer or download the appropriate installation program.
  
  How should I proceed now, I even tried to change the compatibility mode of the configuration file to all the BONES I found on the Compatibility tab, but no luck.
  
  Kind regards
  JAI

  Hello

  (1) cant we make any changes to compatibility and 32-bit installation on a 64-bit machine?
  lol we can make no changes to compatibility.

  (2) my machine is Windows Server 2003 sp2 x 64.
  Is it support obiee11g 11.1.1.5.0 latest version

  (3) should we only use software 64-bit for the 64-bit server computers, cant, we use a 32-bit software?

  Software OBIEE11g of 32 bits can not support on windows 64-bit server that is why they gave separte software of obiee11g install page.kindly check the certification metrix obiee11g

  Please refer to the matrix of Certification available from:
  http://www.Oracle.com/technetwork/middleware/BI-Enterprise-Edition/bi-11gr1certmatrix-166168.xls

  (4) do we need to only install the software, we cant, install company?

  If your using just a single application server obiee11g with 64 bit windows better to go with the 'only software installation option.

  and if your having muliple server then (main, subserver in your production box), you can choose scall business installation option.

  Thank you

  Deva

• Cannot install WHS connector on a 64-bit computer, although the software!

  Hello

  So far, I have:

  Restoration of Mediasmart server on 32-bit computer
  Did all updates HP and WHS
  Have the version 1.3.6 etc..
  Have PP1
  Now I'm going for 64-bit and connect the server and open < host/software Server Connector software.
  
  Double clicking on Setup or Install result with "impossible to install this software on a 64-bit".
  
  I can see in the folder outside the configuration / installation
  
  WHS_ConnectorHelp.chm
  WHSConnector.msi
  WHSConnector_x64.msi
  WHSConnectorInstall.exe
  WHSVersionUpgrade.dll
  WHSVersionUpgrade_x64.dll
  
  So obviously the connector for 64-bit software is there but it wont let me install!

  Can someone help?

  Henry

  Laptop with Vista32bit

  Spirit of Packard Bell Vista 64-bit

  HP Mediasmart EX475 with WHS

  Hi, OK so here is how I did it. I have a Vista 64-bit operating system, and I had the same problem. First, click on file -WHSConnectorx64.msi , and when the apears promp to save or run, click on save and just save it to your desktop. Then click on the -setup.exe file and and when you are prompted to run or save, you can save it to the desktop or run it. I don't remember exactly what I did at that time, but there are only two options. If you save it on your desktop, simply open the installation program and it should be able to find the rest of the required information complete the 64-bit installation. After you have installed the sowtware connector that I came across another problem. Because I'm also on my PC wirlessley I couldn't actually Conect to Server console initially. I found that by disabliling the my security software internet temporarily, that I was able to connect, and everything seems fine. I hope it's useful. Thank you

  Chris.

• Unable to play Settlers II on a 32-bit computer

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I am trying to run Settlers II, I loved this game when I was younger, unfortunately I can not play on my 32-bit computer. When I try to open the program I get "Incompatible with the current system. "Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. Is there anyway that I can change from 32-bit to 64-bit?

  No, a 32-bit or 64-bit are two separate installation media

  Locate the program exe and rt, click to select a compatibility option

• To access the HP LaserJet 1320 on Windows 7 64 bit computer

  I just replaced a desktop computer with a 64-bit Windows 7 computer and attached our HP 1320 laser printer via the USB port.  Windows 7 automatically configure.  The Win7 machine is connected to a local network with a 32-bit Windows XP Thinkpad.  Now, I can't reach the Thinkpad laser printer.  It is said the 'server is not the correct printer driver' but I can't find any way to update the server or the Thinkpad with a print driver.

  Reading these forums, it seems that I should have a 32-bit printer driver on Win7 64-bit computer.  Links to the center of Windows 7 compatibility to the HP support site, which says that there is no HP drivers for the HP 1320 for a 32-bit computer or a 64-bit Windows 7.

  How can I get the additional required driver and should be on the Win 7 machine (where the printer is connected) or on the Thinkpad?  I used to be able to print correctly from the Thinkpad.

  Thank you, thank you.  With a location for the universal print driver, I was able to solve the problem.  Let me rephrase the question as well as others who may have the same problem can also solve their problem.

  Problem: replaced XP with Win 7 64 bit desktop desktop.  HP 1320 printer connected to this desktop computer.  Win 7 Desktop connected via LAN to XP Thinkpad.  ThinkPad could use the printer connected to the HP 1320 network when the Office was an XP machine and could not use it when the Office was replaced by Win 7 64 bit desktop.  Win 7 has automatically added HP 1320 to the Win 7 machine using the universal printer PCL5 driver.

  In an attempt to 'add printer' to the Thinkpad XP, I kept getting an error message "server does not have the correct printer driver" and I had no luck successfully install a print server (Win 7) driver.

  I tried all the solutions proposed in this thread, of which most have a link to the site of HP print driver.  This HP site says there is no print drivers Windows 7 for HP 1320, because it is automatically recognized by Win 7 without special drivers.

  Resolution:

  Follow the link provided by "smittychat" (above) that gives a Universal Print Driver PCL 5 fixed for XP and 64-bit and 32-bit Windows 7.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4157320&locale=en_US&TaskID=135&prodTypeId=18972&prodSeriesId=503548

  I first tried to install the Windows 7 32-bit printer driver on new Win 7 desktop.  It does not work.  (don't forget, the error message, said the print Server driver is not correct)  Then I used the same link and moved to the Thinkpad, installation of the XP version of the Universal Print Driver PCL5 series.  I received an error message, but the installation worked.  I can now print with all the features (two sides printing, etc.) both the Windows 7 Desktop (printing locally) and the Thinkpad XP (printing via the local network).  Thank you "smittychat".  It took me a week.

  Hewlett-Packard is expected to change its pilot site so that verification of drivers Windows 7 points for the universal printer HP 1320 driver link.

• Setup error ODAC 12 c R4 client on the same machine with Oracle 11 g 64 bit for Windows database

  I have Oracle objects and mobile application development with:

  Windows 7 64-bit OS

  Base Oracle = C:\ORA

  Database Oracle 11 g 64-bit 201, home = C:\ORA\DB11G201

  I was running in Visual Studio 2010 and the ODAC customer Oracle 32-bit in another home = C:\ORA\DB11G201CLIENT32

  All was well for a few years on that set up.

  I decided to upgrade to Visual Studio 2013 and .NET 4.5

  Deletion of Visual Studio 2010 and installed Visual Studio 2013.

  I did a normal uninstall of the Oracle 11 g 32-bit client using the rebooted, Oracle Universal Installer.

  The customer old house was gone.

  I downloaded the ODP.NET12C 32-bit Oracle with VS tools R4 and began the installation of the client.

  I selected English and built-in OS account

  I chose Oracle base = C:\ORA

  I chose hone Oracle = C:\ORA\DB12CR4CIENT32

  But I encounter the error:

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  The owner of C:\ORA's ADMINISTRATORS.

  When should I do?

  For guests of 12 c, opened a NEW BASE and a NEW HOUSE?

  Created an ACCOUNT to STANDARD USER and the select statement, but keep c:\ORA and the new C:\ORA\DB12CR4CIENT32 of the House?

  I'm a hold out for migration to Oracle 12 c database because they thrown into the very useful tool Oracle Database Control and replaced by something watered down.

  So I like to keep the Oracle 11 g 64-bit database.

  but Visual Studio 2013 support, use the 12 c R4 32-bit and 64-bit support drivers unmanaged.

  I would use (and use) Managed drivers, but they do not work in database 11g FIPS-140 active environments.

  Thank you for your help and comments.

  Hello

  This is expected because you install 12 c in Base Oracle who has home 11g.

  From 12 c, the installation program has promoted "Oracle Home User' where you can perform the installation with built-in admin user or a secure non-admin user.

  As documented at https://docs.oracle.com/database/121/NTCLI/install.htm#NTCLI1283

  "Oracle 12 c Release 1 (12,1) database client may not share basic Oracle with houses of the Oracle database versions, such as Oracle Database 11 g Release 2 (11.2) and sooner."

  Please see the information listed in the link above for more information.

  Bascially, you need to install in a different Oracle Base and can have all this work.

  Kind regards.

• Installation of Oracle 11 g Release 2 forms and reports

  Hi all

  I have a problem during the installation of Oracle forms11g Release 2.

  

  In fact this is my version of WebLogic Server 11g weblogic (10.3.6) which is recommended by Oracle for Oracle forms11g Release 2

  My system is running on 64-bit...

  Someone kindly suggest me how can I proceed.

  Thanks and greetings

  Shiva

  Hey Shiva,

  check the 64-bit version for all components on Win7 64 ? :

  • Install and set up the loopback adapter
  • Check the PATH entries (dir/X)
  • WLS:
    • 1.7.0_71 64-bit JDK
    • the JAVA_HOME=C:\Java\JDK1.7.0_71 value for system
    • Install WLS 10.3.6 generic 64-bit
    • Check THAT WLS startup http://localhost:7001 / console
    • Shutdown WLS
  • 11 GR 2 forms FM & reports: 64-bit:
    • Step 1 installation (not set)
    • Step 2 set up
  • Install Java 1.8._51 incl. plugins for IE11 and FireFox.

  Hope this helps,

  Friedhold

• What should I do to install HP PSC 2175 on Windows 7 Pro 32 Bit computer brand new?

  Hi all

  New here, but have used HP printers for eons.

  I just 'retired' my old Win XP computer which was attached my printer PSC 2175 and works very well. I am now set up my brand new win 7 Pro 32 Bit computer and I was wondering what I should do first steps.

  1. I have to install the CD printing software and follow the on-screen instructions?

  2. then, I should go to the HP website and download all the up-to-date drivers I need?

  I bought the printer in 2006 and the "cheat sheet" included for installation only mentions computers running up to XP. But I understand that this printer is compatible with Win 7 and since it runs like a dream, I don't want to buy a new printer, if I did not really.

  Thanks for all your help in advance

  Barb

  @fritzmom, Sorry so late for your response. You will need to configure your printer first hardware. Install the ink cartridges and leave the initialization process.

  When the printer is on the main screen, then you can download the drivers from the Web site or the installation CD.

  Either way is fine. If you want to download the latest drivers, simply go to the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=90809&task=&

  @2of4, all you have to do is re - download by connecting the USB cable. Here is a link that may help.

  http://support.HP.com/us-en/document/c01796879