Installation of server applications.

Similar Questions

• set the folder of installation of server applications

  Hello
  in TOOLS 8.50 I create a domain of ACEs. But it is created in C:\Documents and Settings\Adm
  inistrateur\psft\pt\8.50\appserv\:

  Creating domain...
  Copying application server configuration files...
  Copying [F:\psoft50\PSPT850\appserv\small.cfx] to [C:\Documents and Settings\Adm
  inistrateur\psft\pt\8.50\appserv\ALHR9050\psappsrv.cfg]
  Stripping Annotations...
  Copying [F:\psoft50\PSPT850\appserv\small.cfx] to [C:\Documents and Settings\Adm
  inistrateur\psft\pt\8.50\appserv\ALHR9050\psappsrv.cfx]
  Copying Jolt repository file...
  Domain created.

  Why? How can I set the installation folder?
  
  Thank you.

  This is because you have not set the PS_CFG_HOME environment variable.
  New at PT8.50, when this is not set, the configuration of the domain files go in the user folder.
  If you ever want to find your domains under PS_HOME as before, you must set this variable equal to the PS_HOME, he should go to.

  Nicolas.

• installation of the application 10g (10.1.2) on RedHat 5 Server

  Hi, I read a lot on the site of Oracle on RedHat 5 is now certified on server applications recently (in April).
  
  My question is: what steps do you need to install application server 10.1.2? Install the 10.1.2 not certified version first and then install the patch? I use a Redhat 5 server install on and I get errors during installation (regarding the missing operating system packages so I had to do some kernel parameter changes) when I install 10.1.2 application server on Redhat 5. But after that I started to read the documentation further, I realized that the RedHat 5 has not been certified for this version of the application server. But later I saw on April 15 that the status has changed.
  
  So I was wondering if anyone knew the steps I need to do in order. If anyone knows a document out there, it's still better.
  
  Thank you! If I don't get all the answers, I'll just check Metalink. I am documenting what I pass by these installs with screenshots I have go through it. I just want to know what to expect.
  
  Chris

  Oracle Application Server 10 g 2 (v10.1.2) is certified on RHEL5. Refer following matrix certification for more details:
  http://www.Oracle.com/technology/software/products/IAS/files/as_certification_r2_101202.html

  And see this note on MetaLink for details and requirements to install it:

  ID: 564174,1 Oracle Application Server 10g (10.1.2) Requirements for Linux: OEL 5 and RHEL 5

  Thank you
  Shail

• Installation error Oracle Applications E-Business Suite R12

  Hello world
  I have the error during the installation of Oracle Applications E-Business Suite R12 on Windows server 2003 R12
  
  Please help me
  
  This is the log file:
  
  
  Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
  Running instantiation drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
  dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
  backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
  dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
  backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
  Step 0-5
  
  Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
  
  Step 3 of 5
  
  Step 1 of 5
  
  Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
  
  Step 4 of 5
  
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  Availability of data
  
  -----------------------
  
  
  command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
  
  'E:\Oracle' is not recognized as an internal or external command
  operable program or batch file.
  
  
  RW-50011: error:-connection of database ORACLE_HOME test returned an error: 1
  command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
  
  'E:\Oracle' is not recognized as an internal or external command
  operable program or batch file.
  
  
  RW-50011: error:-connection Apps ORACLE_HOME test returned an error: 1
  Download of the configuration
  
  ----------------------
  
  
  Download the D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt config file
  
  AppsConfig: "config.txt" download...
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: erp
  sDbDomain: erp
  sDbPort: 1521
  sDbSid: SCREW
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
  Failed download of the config file to D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
  
  The environment file
  
  ------------------
  
  
  RW-50016: error:-database's ORACLE_HOME environment file not created:
  File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
  RW-50016: error:-file environment ORACLE_HOME Apps was not created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
  RW-50016: error:-iAS ORACLE_HOME environment file has not been created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
  RW-50016: error:-environment APPL_TOP file not created:
  File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
  RW-50016: error:-ADOVARS of the environment file has not been created:
  File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
  RW-50016: error:-APPSCONFIG not created:
  File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
  DBC file
  
  ----------
  
  
  RW-00023: error:-DBC file has not been created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
  HTTP
  
  ------
  
  
  check the URL = http://erp.erp:8000
  
  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
  Help page
  
  -----------
  
  
  check the URL = http://erp.erp:8000/OA_HTML/help
  
  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.
  Virtual directory
  
  -------------------
  
  
  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.
  JSP
  
  -----
  
  
  check the URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
  
  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.
  Login page
  
  ------------
  
  
  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv

  You cannot use spaces in file names, so I think that these errors are because you use a space in the name of the directory (Oracle R12) - Please change the name of the directory to another name without spaces (e.g. OracleR12) and retry the installation then.

  Thank you
  Hussein

• Error connecting to the Server Application creation

  Hi friend
  
  I learn the SOA, I work on samples of cue card in jdev 11.1.1.4
  In "Design a SOA Composite Application" Cue card sample iam getting error when connecting to the Server Application creation
  
  whille I give the connection test I get
  ----------------------------------------------------
  JSR-160 performance test... Failed
  cannot establish the connection.
  Test DomainRuntime JSR-160... Jump
  Tests of JSR - 88... Jump
  Tests of JSR-88-Local... Jump
  JNDI tests... Jump
  JSR-160 Edit tests... Jump
  Test HTTP... Success
  Model MBeans test server... Jump
  HTTP authentication test... .the
  
  2 of 9 successful tests
  --------------------------------------------------------------
  I gave
  Username > weblogic
  password > eu1
  Since the parameters of the WebLogic Server console so I gave the same
  
  WebLogic host name > localhost
  WebLogic domain > I gave the domain name that I've specified during the installation of Oracle SOA Suite
  
  Port > 7001, 7002 > ssl port == > if I give this 0 on 9 successful tests
  Port > 1521, ssl > 1521 port == > 2 of 9 successful tests
  
  
  Please advice me how can I solve this problem, what needs to be done
  
  Thanks in advance
  AT

  Have you tried after restarting the JDev After unchecking this setting? Connect to the Weblogic administration console, go to the Middle--> servers, click the name of the Server Admin and check the value of the address of the listening and listening port setting. Use the same values when the connection to the application server connection in JDev. If listening address is empty then either use localhost, or the host name or IP address of the machine.

  Kind regards
  Anuj

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• TENS of installation in the application directory--> cannot find directory RTE

  Hello

  I couldn't find an answer of fitting about my problem using search, so I'll try my luck by asking.

  First of all: I'm using Labwindows/CVI 8.5

  I created an installer for my application using the Distribution Kit Wizard. Under the tab drivers & components I chose only the 'standard Run-Time'.

  On the Advanced tab, I left the option "Install Labwindos/CVI Run-Time Engine in the application directory" unchecked.

  This installs and works fine at my PC clients.

  Now the problem:

  My client does not want that all files are installed in the Windows\System32 directory...

  So I checked the option "Install Labwindos/CVI Run-Time Engine in the application directory" and created a new installation routine.

  This installs fine and the cvirte folder is also be copied into the directory of the specified program and not Windows\System32... but now whenever my client tries to run the application, it gets called with the following messagebox:

  Cannot find the directory RTE:

  C:\Windows\system32\cvirte

  Which is actually very good, because I wanted to RTE must be installed in the folder of my program, but somehow my request is always pointed toward the search in system32.

  Is there a way to fix this without copying the RTE in Windows\System32 again?

  Given your explanation, I can understand why you see the error message. When you try to locate the resource (bin) and directories of fonts, DLL RTE search in the directory of the process that loaded, then in the system directory. As RTÉ is not installed in one of these locations (instead, it is installed in the same directory as your DLL file), we do not find the directory "RTE". There is nothing particularly wrong with what you're trying to do, except that we can't do well. I'll drop a request to fix this for a future version. In the meantime, you have a few options:

  1. let the RTE to install in the system directory, as it normally would.

  2. manually copy the directory cvirte of your repertoire of the DLL in the system directory.

  3. ask the client install your package DLL in its application directory. The target directory can be changed by the customer at the time of installation.

  I know these aren't the major options. I personally highly recommend the first option, despite protests from your customer. Is there a good reason that it is forbidden to use the system directory?

  A. Mert

  National Instruments

• LabVIEW DSC Client\Server application. How to install the executable on the client.

  Hi all

  I'm currently programming an Client\Server application.  The server application must host shared variables, and the client application must read.  The client application reads the shared variable in the indicator of their connection with the properties of the indicator.  I started programming and the client application and the server are in the same project.  In the client application I am lie the indicator to the library in my project that has the "My Computer" as the address.  My question is how do I tell the executable installed on any computer, that I wanted to use the variables shared on the server?  I have LabVIEW 2009 DSC.

  Thank you

  If by "data binding", you hear the Variables defined on your computer, then Yes, unless you want not linked to new variables on each executable, in this case here is an example that can help.

• Error: The application-specific permission settings grant Local Activation permission for the COM server application in the Windows XP computer.

  Original title: DCOM {E9F9ED00-7705-101B-9802-0000C07B665C}.

  I have this message DCOM in the registry: "the application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E9F9ED00-7705-101B-9802-0000C07B665C} server application the user... xxxx...". (I deliberately placed the "xxxx" instead of my current PC for security reasons). This security permission can be modified using the Component Services administrative tool." I tried to look through the forum here, and I found elements that were close and others are not. so if anyone knows where I can go make the adjustments, it could save our society approximately $10K, because my new bosses are ready to install all new hardware and software, but if we could find a much simpler approach to this problem, this would make the new kid on the block like a champ look.
  We have a Window XP, the flat touch screen PC, running a few packages of software reviews that keep a record of our SCADA system trend.

  At random times around the clock, the PC will just restart and return to the logon screen. There is no other necessary users, so we have only the journal administrator form. As soon as we open the administrator it is specially configured to run a specific program of our choice, but if the PC keeps restarting whenever it feels like it, there is no history chart tend to save. It is essential, that we need.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• "CCP registration Service server application has stopped working".

  For two days I received the following error message: "check of the CDP server application has stopped working". I reloaded the software (after research, it seems to be one of my suppliers of USB) and still get the message. Someone at - he a clue as to what then? I am still under Windows Vista 2007.

  Hello

  What software you have reinstalled?

  Perform the clean boot and check:

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

• client-server application

  I intend to transfer my application written in C/C++ for playbook... Basically, the application has a client and a server process communicating via sockets... Client process has a user interface with a few UI controls components, server process will run in the background... I would like to know if the client-server application can be written on the AIR platform?... If this support is available I think using AIR/native extension for C/C++ code porting

  Also, I'm new to this platform, I would like to know if there is a support to launch the 3rd party app to another 3rd party app?... Say to use above customer case must be able to launch the server process...

  concerning

  Arun

  Not too sure how you'll be able to do on the PB, because you can't start another application. Maybe in the future they will allow applications 'start-up' to be registered.

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• Client-server applications with problems

  We use appvolumes 2.10

  We are certain to have issues with client-server applications such as launch winscp and subversion.they very well, but they can not connect to servers. The appstacks work fine on own vanilla but does not work on the main image with all the policies and basic applications. When install us it manually on the main image the applications work as expected. Indications on where we can make changes on the primary image for the appstacks works? Thank you

  Lakshman thanks for you the directions. I tried to change the .cfg file last week, but had no luck. It's a known with Appsense AM incompatibility. We have uninstalled Appsense & h and it seems to have solved the problem.

• installation of the application

  I have the cloud adobe creative and when I do the installation of an application, as an Illustrator, he executes the download then asked me to buy the program. How to install permanent programs? This isn't leave as a version 30 days.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?