Installation of SRP527 of voip?

Similar Questions

• Installation of a gateway VoIP behind a Time Capsule 3 TB

  Hello

  I installed in my office a time Capsule TB 3 [TC] that provides internet access wi - fi through a modem connected to a branch of fiber cable. I am installing a Neogate TG-800, which is a GSM VoIP gateway with 8 SIM cards (allowing VoIP make GSM calls).

  The TC connects to the modem using PPPoE, PPPoE connection is ' always on ' and configure IPv6 "Link-local" is only and use dynamic hostname global.

  Therefore, the router mode is 'DHCP and NAT' (cannot change it) and I assigned a DHCP 192.168.5.2 to 200 range, which is compatible with the gateway GSM (default 192.168.5.150).

  The problem I have is that the computers via the wi - fi can not access with reliability the ay of GSM 192.168.5.150 gateway. A certain time can, sometimes cannot.

  I think it's a classic "double NAT". I tried to make the port settings to force the road of 5060 (used by the GSM gateway) to 192.168.5.150, but it does not work.

  I don't see how I could use the bridge mode to connect to the modem (given I'm in PPPoE).

  I tried all combinations of parameters, but frankly I'm lost. It seems that transport CANADA does give me enough control to access the GSM gateway.

  Everyone thinks a solution?

  Thanks in advance

  The TC's gear level really home / servant and I recommend routers in Enterprise for any situation of the enterprise-level.

  I think it's a classic "double NAT".

  I don't think so.. unless your TC shows a NAT error double which you ignored.

  The extensive network of the CT should show a public IP address.

  The problem is much more likely to do with the ports and NON Apple using the upnp standard.

  And this...

  The problem I have is that the computers via the wi - fi can not access with reliability the ay of GSM 192.168.5.150 gateway. A certain time can, sometimes cannot.

  Reliable access to the bridge is strange if everything is on the same IP range.

  My recommendation is to use a standard enterprise router... fill the TC to that and use it to wireless and TM backups but not routing.

• Using my Bluetooth of Plantronics 340 headset as headphones pc VOIP.

  I try to use my bluetooth headset from plantronics with my computer, such as a microphone/earphone combination, with the popular game software of VOIP Teamspeak.

  I have a laptop from a different manufacture under XP SP3. My Bluetooth stack is an a Toshiba. I reinstalled the drivers Toshiba/software because he always used the Microsoft generic ones before, but I can't seem to detect the headset.

  What I am doing wrong? Please let me know if you need more information about my hardware/software configuration in order to respond to my request. The system is able to detect compatible bluetooth mobile phones, just not this helmet apparently.

  Right click on the systray icon Bluetooth, click new connection-> select "Custom Mode"->...
  Now you should be able to select the headset profile.
  Also if the software can control the headset, then use the VoIP option. If you want to control you headset with button clicks and so now then do not select the VoIP option during installation.

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• WRTP54G VoIP help

  I'm having the following problem: I'm currently stationed in Korea. I used to have Vonage, but doe to the monopoly of the local internet company is running, I had to subscribe to their VoIP service. When they came to hang it up, I expect to spend on the modem I got from them originally and a modem VoiP capacity. However, what they have done is add an any switch between modem and my WRTP54G has a phone in port. If the installation was Modem - VoIP - Wireless Router device. Now when I connect to my wireless network, all websites either load extremely slow, incomplete (no images), or not at all. I can not connect to my router. Even if I wired router to the laptop, I get the same frustrating results. As a result, I go straight from the VoIP device directly into my laptop. There are configurations I need to do? Any ideas anyone?

  Thank you

  Rob

  OK, I fixed it. At some point I completely forgot the obvious. Rather than go to Modem - Router - VoIP device, I plugged the VoIP device on the router. So now, my configuration is Modem - Router - VoIP device. Everything works beautifully. I don't know about the technical explanation, but it works. Everything I wanted, so I'm not going to ask lol

• HP OFFICE JET 6210 ALL IN ONE: stop hp 6210 all-in-one fax receive automatically once I have improved the line of pots to voip line

  I had printer for 6-7 years and never had a problem. I up graded my phone att pots line (plain old telephone system) the system to voip (voice over internet phone). I never had a problem to send and receive faxes. Now, I can only send faxes and not receive them, even with the automatic reply button on! The only rings (6210 HP) fax. Chat with people to send faxes reports the 6210 indicates the machine is busy, which is not the case. I checked the telephone connections and cables and still get the same results. I have checked the filters and hooked up to another fax machine (hp 8500 A909a) with the same results. I downloaded a updateded printer driver and still get the same results. I noticed when I sent a fax test fax hp service test, they sent a fax to the back but the fax would only ring unless I press the black / touch of color, it will leave a fax come through. Y at - it a remedy to this new problem. Help.

  Hi @MACMAN55 and welcome to the Forums of HP.

  I understand that you are having problems of fax. I would like to help.

  Switch to a VoIP system may cause problems.  The fax machine is designed to operate with an analog installation.

  I'm including a couple of documents with more information, as well as instructions on how to get the best performance from a line VoIP:

  Faxing on a voice over Internet Protocol (VoIP) Service

  Fax VoIP services

  Please let me know if you have any questions.  Thanks for posting on the HP Forums.

• RV042G and VOIP

  I have a RV042G in a simple configuration.  WAN1 is cable and DSL WAN2.  The cable is 200 down and 10, DSL is 25 down and 10 upwards.

  We are a financial services company, so we have a lot of services that require a constant time and disruption in these services seems to cause a lot of problems (by example, if I use the smart-link failover and WAN1 is primary and it breaks down, even if WAN2 captures correctly for these services can not restart correctly).  WAN2 is more reliable, but WAN1 is faster.  We use WAN2 WAN1 as the backup, as principal however do to WAN2 expansion is no longer sufficient for our needs and we are experiencing problems with call quality on our VOIP lines.

  My question is this:

  Is it possible to installation mode the RV042G of load balancing, but have only certain types of traffic to WAN1 and WAN2 on other types?  For example, all VOIP on WAN1 all quotes (like Bloomberg, Thomson One, etc) on WAN2 (provided that I know that the ports that use these services)?

  Thank you.

  Nick,

  It is certainly possible and it is quite common. When you enable load balancing, you will see an option called protocol binding. Select the service (or create a service custom) and bind it to according to the WAN is suitable. If the WAN connection fails, all traffic will return to the other WAN port until the original WAN port is back.

  Answer please if you have any questions.

  -Marty

• Implementation of VLAN / QoS for VOIP on RV180

  I posted earlier about setting up VLAN / QoS for VOIP on the SG200-18 (see: https://supportforums.cisco.com/discussion/12193666/setting-vlan-and-qos...).

  I did go ahead and buy the RV180. I connected to SG200-18.

  I wish to proceed with the implementation of VLAN / QoS on the RV180 so my phone (Grandstream VOIP wireless phone) VOIP is on its own VLAN separate from the rest of the network, so make sure that all QoS settings are optimized to give the first priority of VOIP network telephone.

  Currently I still have the VOIP phone connected to SG200-18 as stated in the previous post.

  Here are my questions:

  1 should I leave the VOIP phone connected to the SG200-18 and config all the VLANS, VLANS and VLAN Switch voice settings down to the VOIP phone, or should I plugged the phone VOIP in the RV180? Which would give me better performance and easier to do?

  2. How can I place the VOIP phone on its own VIRTUAL LAN, in addition to optimizing QoS settings so it gets a top priority for the network?

  3. I currently have set VOIP telephone in order to reserve a DHCP address in the 192.168.x range. When you move to the VLAN, should I set the DHCP reservation and/or my firewall settings (I through the firewall as well)

  4. I also get a beta-test VOIP Grandstream office phone. Time of its installation, what I have to plug directly into the RV180 or the SG200-18, and I have to put it on the same VLAN as the phone VOIP without wire Grandstream or VLAN different? It also supports PoE, but the RV180 or SG200-18 model I does not work. If I use an external power supply, connect each device will be OK or might that it became fried?

  Thank you!

  Hello

  1 should I leave the VOIP phone connected to the SG200-18 and config all the VLANS, VLANS and VLAN Switch voice settings down to the VOIP phone, or should I plugged the phone VOIP in the RV180? Which would give me better performance and easier to do?

  It will not be much difference between being on the switch or on the router, so it is for the most part to the simplicity of configuration performance.  If you plug the phone directly on the router, you will really not disturb trunking VLAN or none of this switch.

  This is really what is more convenient, but if you are able to plug into the RV directly I wouldn't worry QoS on the switch.

  So let's talk about implementation of the RV180.

  First go to network > LAN > belonging to a VLAN.  Enable VLANs, and add a new VLAN for voice (most people use 100 for voice for a reason, but it does not matter).  You will take care to set the port that the phone is plugged in not tagged to the new voice VLAN, and you can exclude the data VLAN of the port.

  Then go to several VIRTUAL local network subnets and configure the address range for it configuration DHCP / new subnet (for example 192.168.100.0) If you do not want to use it (makes things a bit easier)

  Finally, to enable QoS on the RV go to QoS > QoS WAN profiles.  Activate the WAN QoS, make sure that it is set to the priority mode and add a new entry to the table.  You can name it anything you want (I used VoiP), then set it high priority.

  Then go down on the link profile page and add a new entry here. Select the profile you just created in the drop-down menu, set the service to one, select traffic selector VLAN and make sure the drop-down menu for VLAN is the VoIP VLAN.

  At this point, we have a configuration where the voice traffic (or basically anything on the VLAN voice) will have priority when it comes out the WAN interface.

  3. I currently have set VOIP telephone in order to reserve a DHCP address in the 192.168.x range. When you move to the VLAN, should I set the DHCP reservation and/or my firewall settings (I through the firewall as well)

  The second VIRTUAL LAN should have a configuration of different subnet for him, because I spoke up.  During this process you will place the DHCP server for the new VLAN as well.  You can adjust your reservations for the phones, but it does not really matter what IP they get, since we are prioritizing voice any VLAN, so you don't have set up a reserve, unless you really want to.

  4. the Grandstream phone.

  I would put the Grandstream (and all the other VoIP phones that you could get) in the voice VLAN so that he would get the same priority treatment.  At this point with multiple devices, you can indeed install a trunk to the switch (VLAN normal unidentified and voice VLAN Tag) and configure the ports to the voice VLAN for these phones.  Who will ensure that the switch gives priority to the traffic of voice, even if it is probably not as important in their own country on the WAN.

  Regarding the PoE device connected to a non PoE switch or a router, there will be no problems.  I'm guessing that the phone also comes with an AC adapter.  It will not feed this power in the thread just because it's PoE, it's pretty much a one-way circuit.

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Implementation of VLAN and QoS for VOIP on SG200-18

  We recently purchased the smart switch SG200-18 to replace a Netgear switch. We are moving our phone service to VOIP through our local ISP as well.

  I currently have the VOIP phone plugged into Port 17 on SG200-18 (it is a Grandstream Cordless VOIP phone).

  I want to put the VOIP phone on one VLAN separate from the rest of the network and optimize QoS parameters so that the VOIP phone has exceptional audio quality even during network traffic.

  Here are my questions:

  1. do I need to set anything on the type of port to Port 17 (because it resembles a shape any Combo port)?

  2. How can I do to isolate VOIP telephone it's own VLAN (I see the parameters VLANS and VLAN voice, not sure that one to use;) I've tried to set a VLAN and broke the Internet connectivity on the phone until I went and removed)?

  3. do I need to adjust the QoS settings to switch to better optimize the VOIP phone?

  Some additional questions about the GS200-18 in general:

  1. do I need to adjust the parameters of the system on the switch time? I am in the Central time.

  2. do I need to adjust the Green Ethernet/Energy Saving parameters or should I stay with the default settings?

  In addition, a couple of "getting started" questions for Cisco:

  1. I registered an account My Cisco. What should I do to register my switch with Cisco and associate with my My Cisco account?

  2. What are the benefits of purchasing a contract of Cisco Small Business support, and how much would it cost the SG200-18 (I ordered it from Provantage)? I'm curious to see if it's worth the money.

  Here's my 'features ':

  Switch: SG200-18

  VOIP phone: Grandstream DP715 and 710 handsets

  Plugged in: Port 17 on SG200-18

  Services: Internet Local (Direclynx)

  Type of connection: 3 m down / 500 k up DSL move to a future wireless connection that will give us higher speeds

  Backend VOIP provider: VOIP Innovations

  Router: Apple Airport Extreme AC model (all Macs and iOS devices and the OS X Server on the network, so I use the Apple router facilitates installation, because is not QoS, trying to QoS and VLAN in the switch)

  Thank you all!

  Hello

  I'll just go to the list again:

  1. sounds good in the port from the drop-down list. So can I just connect the VOIP phone and go with it, correct?

  Yes, just plug in ethernet combo port and it will work.

  2. is not an issue, but I agree, Apple likely isn't compatible QoS or VLAN.

  3. thanks for the info on time/NTP settings. If I wanted to go there and try to configure NTP, how much is it and what I have to do? I want to I can give it a quick try.

  To Setup NTP on the switch is quite simple.  Go to Administration > Time Settings > time system and check the boxes to activate the main clock Source (SNTP)

  Then go to the settings of the SNTP page and add a new entry with the IP address of an NTP server.  There is a list of available NTP servers here:

  http://www.pool.ntp.org/en/

  You must also ensure that the switches Administrative default gateway is set correctly (it must be set the to the default gateway, probably the most convenient airport) so the switch can contact the NTP server.  That option is set under Administration > Interface Management > Interface IPv4.  Change the user-defined default gateway and enter the IP address of your airport (or whatever your default gateway for your network)

  4 sounds good on the Green Ethernet settings. I'll leave it as default value.

  Yes, better to just let those unless you have weird problems with ports disconnect, who can sometimes be caused by Green Ethernet, but if there's nothing like leave it on and save a few watts.

  5 sounds good on does not need to attach my passage to my Cisco account. Should I fill out a form any registration of the product with Cisco before calling support?

  It is not a record for support.  The only thing we need you to do is to create a Cisco account, but you have already done this, so if/when you call in support, you just need your ID for Cisco (also called a CCOID sometimes) and the serial number of your switch.

  6. thanks for the info on the Service contract. Is it something that I would need to order directly from Cisco or I who would get my Cisco partner (Provantage)? After the three years is up, treat yourself to renewal or it just falls? Is there a certain amount of time I have to buy the Service Contract forward make me ineligible?

  Support contracts are purchased through a partner Cisco, or you can get them online for the CDW or Newegg for example.  Basically, you have until the expiry of your current aid for the purchase of a new contract.  For example, right now your switch comes with 1 year of technical support.  You can only buy a contract while it is still active.  Once your three-year contract is about to run out, you're in the same situation.  You can renew it before it expires, however if you leave is up, you will not be able to put a contract on it.  Contracts are not my specialty, however, so you can check with your partner for complete details.

  7. sounds good to how data use VOIP calls. His dislikes too. :-)

  I agree, a voice call is not much traffic.  What you have described you probably don't have problems, although of course I can't guarantee that.

  8. because it is from your provider and they specifically mentioned the VOIP, I would say that you'll be fine here.

  You had also placed on your airport using access point behind a router in small businesses.  I would like to say that it is possible, a large number of wireless routers have an option to put access point only mode or something like that, but you should check with Apple on how to do it.

  Insofar as a Small Business router if you decide to upgrade for the options VLAN or QoS, I would recommend the RV180, or perhaps the RV320.  Two of these models are available with or without wire depending on what you decide to do with the airport.

  I think I got all the questions, but if not just let me know,

  Christopher Ebert - Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Stand-alone voip router configuration

  Hello

  I'm pretty new to the part of Cisco's IPT. I am planning to buy a Voip router, but don't know if I want it is possible. See the attachment for the installation I plan on the building.

  Cisco 881 must register with the VOIP provider. A phone number is online in this way. Also, is there a PSTN line in the House with a different number.

  Calls from the phone in the outgoing House should use the VOIP line, unless it is down, then they must be routed to the PSTN line.

  Outgoing fax calls must use the PSTN line.

  Incoming calls on the PSTN line must be routed to the fax machine.

  Incoming calls on the VOIP line should go to phone home.

  Is it possible (independent) without any additional software/servers?

  Thanks for the help!

  It depends on what you want to learn. You will be probably able to do any transcoding or conferences on this amount of DSP.

  So a 1751-V is going to be limited to 12.4 (15) T and earlier versions and will not have access to the new features of 12.4 (20) T or later.

  As much as to plug an analog phone, connect a line from your provider and the registration of some IP phones that should be all you need.

  I would plug the cards into the DSP calculator to do what it can run 4 FXO/FXS ports you want to put in the router.

  HTH,

  Nick

• Crashing apps and the slow performance since the installation of macOS Sierra

  Hello

  Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.

  Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-07 16:52:11

  Download EtreCheck from https://etrecheck.com

  Time 06:53

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Apps are broken

  Hardware Information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 2

  1 2.53 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 371

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 256 MB

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

  Disc information: ⓘ

  Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)

  Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 412.88 GB Online

  MATSHITADVD-R UJ-898)

  USB information: ⓘ

  Logitech USB receiver

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]

  com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]

  com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]

  NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items is no longer function in OS X Yosemite or later

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  tasks of Apple 178 [loading]

  tasks of Apple 86 [performance]

  Launch system demons: ⓘ

  [no charge] 42 tasks of Apple

  tasks of Apple 167 [loading]

  tasks of Apple 95 [performance]

  Launch officers: ⓘ

  [performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]

  [cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-13) [Support]

  [cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]

  [cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]

  com.Adobe.agsservice.plist [running] (2016-08-19) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.apple.installer.osmessagetracing.plist (2016-09-14)

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.teamviewer.Helper.plist (2015-03-03) [Support]

  [cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]

  [loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]

  [loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]

  com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]

  Plug-ins Internet: ⓘ

  DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]

  OVSHelper: 1.0 (2010-12-10) [Support]

  OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]

  NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]

  AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]

  DivXBrowserPlugin: 2.1 (2010-12-10) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-14)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe

  iPhotoPhotocast: 7.0 (2010-07-14)

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]

  AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]

  JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK

  User Plug-ins internet: ⓘ

  Picasa: 1.0 (2011-03-29) [Support]

  Safari extensions: ⓘ

  DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  3rd party preference panes: ⓘ

  DivX (2010-12-10) [Support]

  Flash Player (2016-08-30) [Support]

  Logitech Control Center (2011-11-05) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% kernel_task

  5% WindowServer

  1% com.apple.AmbientDisplayAgent

  1% xpcproxy

  0% fontd

  Top of page process of memory: ⓘ

  Kernel_task 432 MB

  Mdworker (15) 430 MB

  Airmail beta 283 MB

  152 MB Finder

  Sandboxd 147 MB

  Virtual memory information: ⓘ

  476 MB free RAM

  3.53 GB used RAM (1.41 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 October 2016, 16:39:48 Self test - passed

  7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash

  / Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta

  October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang

  / Applications/App Store Store.app/Contents/MacOS/App

  October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang

  October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang

  /Applications/preview.app/Contents/MacOS/preview

  October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang

  October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang

  /Applications/Firefox.app/Contents/MacOS/Firefox

  October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang

  /Applications/pages.app/Contents/MacOS/pages

  October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang

  / / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat

  October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang

  UNKNOWN PATH

  Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?

  Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?

  I'm not sure I'd worry about the plane crashes - it is listed as beta software

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• After the installation of Sierra, calendar does not work

  After installation of Sierra, when you open the calendar on my Mac, missing entries and the screen is frozen with the comment 'Moving calendars to the server account.' I signed that I the cloud to see if it would help, but I still have this problem.

  Hello and welcome to Apple support communities, Stanley Star.

  If I understand your message to the right, at the opening of the calendars for the first time after upgrading to Mac OS Sierra, you are missing calendar events and the app is frozen with a message saying "moving to Server account schedules. Calendars, this is one of my apps used on my Mac, so I certainly understand the importance of having the opening and operating as usual. I'm happy to help you to turn it on again!

  Icloud and a signature was an excellent step to try. Here are the steps I recommend to do next:
  

  1. Check that the date and time are correct in your Mac by following the steps in macOS Sierra: set the date and time on your Mac.
  2. Close the present calendars on your Mac. If you are also reminders, close that as well as reminders and schedules work together. If the calendars close normally, will not force close it by clicking the  in the upper left corner of your screen, select force to close, select the calendars in the list of open applications, and then click the button close Force.
  3. Go to System Preferences > iCloud and uncheck the boxes next to the calendars and reminders.
  4. Restart your Mac.
  5. A times restarted, open again your calendar application, select "Calendar" in the Apple menu bar in the left corner of your screen, select "Add an account", choose iCloud and sign in with your Apple and the password.
  6. Give your calendar some time to sync and charge all your data. Once it is loaded successfully, and you can see all your events, open the reminders and do the same steps for signing in iCloud there are also well.

  Thank you for using communities of Apple Support.

  Take care.

• What is the installer.app?

  Nobody knows what's 'installer.app '?  It looks like a pig... major on my monitor of activity... I'm trying to diagnose performance problems do I need?

  Hey there Celeste Jones.

  After researching this a little app, looks like it may be an old app that is not supported. I suggest looking up the app in your Applications folder and get rid of it, because it is probably more useful for you.

  Thank you and let us know if you have any other questions.

  See you soon.

• Installation of MacOS Sierra is not possible (no boot volume)

  Hello everyone

  I have an iMac with the following characteristics:

  

  and I'm trying to install the new Sierra of MacOS. But everytime I open the installation program, it tells me that I can't use the partition called 'Mac OS X', which is my main Mac partition on my drive of fusion, for the installation of Sierra because it cannot be used as a boot volume. Of course, it's completely absurd because I started 'Mac OS X' volume whenever I boot my Mac!

  This screenshot shows the installer and the associated message:

  

  Could someone help me please? I really want to do a clean install of all and that spend hours to restore my previous settings! Please...?

  Best regards

  Martin

  Hi mpauli,

  I see that the Sierra of macOS Installer gives you a message saying "this disk cannot be used to start your computer." In order to get this problem solved, I suggest you follow through the troubleshooting steps in the link below.

  Setup notes "OS X can not be installed on your computer" or "this disc cannot be used to start your computer.

  See you soon.