Installation of the application created by Labvew 8.2.1 with operating system Windows XP on another PC with operating system Win2000 installation.

Similar Questions

• Unable to show the application created

  I have some users that a workspace is unable to display applications created. However, they can select with the arrow keys and assumes that the sequence of the application. For example, Live and Test application is created. User must press the arrow down 2 x key for access to the test application to select. However, some users are able to view applications. all users use IE7 and use HFM9.3.1

  Check the following Internet Explorer settings:

  Go to Internet Options: security, custom level and enable script put on windows without size or position constraints allow it.

  Restart the services.

  Try to connect in twelve... Problem should be solved.

  Kind regards

  Malezieux

• WIN 64: The application is valid but was designed for a different system (32-bit).

  I have an application written in Toolbook 4.0 (WIN 95 to 1996). It works fine in XP 32-bit. When I try to run in XP 64, I get the error message "the application is valid but was designed for a different system" is at - it an emulator or a way to make a 64-bit computer to run 32-bit code? I know that this application is old but it works fine in XP 32 and I can't replace it witout totally re - develop from scratch.

  There are several options depending on your operating system.

  For XP/Vista: You can use Microsoft Virtual PC 2007 and run Windows XP x 32 inside your x 64 system.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  For Windows 7 (Pro and Ultimate only): you can use Windows Virtual PC, which comes with a copy of Windows XP on the inside to run legacy applications.

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

• Not sure how to display all the applications that I'm supposed to have with the creative cloud - constant spin in the window? [was: creative cloud]

  Trying to download my creative cloud, but get a constant rotation in the window. Not sure how to display all the applications that I'm supposed to have with the creative cloud?

  Please visit: App does not open. Wheel of progress turn continuously

  I hope this helps.

  Concerning

  Megha Rawat

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• How to add an icon to the application created by the user to the e-mail toolbar

  I have a new Mac Mini, Mac Mail and El Capitan 10.11.4. I would like to add an icon to the mail toolbar to trigger an application I wrote. I tried the steps for "Finder" and who works for "Finder", but I want it on the toolbar "Mail". Can it be done? If so, how?

  BTW, I'm a professional programmer.

  I requisted you post be moved here:

  Developer forums

• I bought windows 7 with singel user refuse and install on a computer. After some time the material falls down on this computer. I can install windows 7 on another computer?

  I bought windows 7 with user indulgence and install on a computer. After a while this PC stop working with hardware failure. In this case, I can install windows 7 (single-user license disk) on another PC?

  Yes, you can, but you may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problem with the application after the installation of the .bar file

  Hello

  I created an application. Everything works fine when I compile Momentics, but when I create a file via the 'Export release build'.bar and install this file on the device app does not work properly.

  The application creates a profiles and showing them in the list view, all the data in the json file. When I install the application of the .bar file create profile and change the settings for this profile and return to the main screen, profiles disappear. This problem will not occur when you compile a program on the phone directly from Momentics.

  Welcome on the support forums.

  you reproduce the workflow step by step with a debug version?
  do you have any record that can give you advice? If not, add a little.
  where is the location json file that you use to save the data? Perhaps a relative path is used.

• How can I access the log files of the application of a ThinApp on the virtual drive?

  I thinstalled an application using the v4.6 and I am able to launch and run the captured application.

  But the application creates log files to:

  c:\Program files\ensembleProAgent\LOGS\

  So I can access them on of ThinApp virtual drive?

  If so, any help is appreciated, I don't know where is the virtual drive or how I can access / read it.

  Thank you

  Joel

  Hello

  A virtual drive in the world of ThinApp means a disk that you have virtualized so he will be present for the virtualized application. If you mean by the word virtual drive where we keep the changes not applied to the physical environment are you talking about what we call the sandbox. Default location would be users with roaming profiles in a folder called Thinstall (ThinApp used to be called Thinstall until VMware has acquired the product)... Method of pomp for the sandbox would be to hit start - run on your client and enter %APPDATA%\microsoft\windows\sendto and click OK...

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• Cannot run the application, appdata not available

  I can't run the applications that I install. He tells me %APPDATA%\microsoft\windows\sendto cannot be accesed

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. Have you been able to run the same applications before?

  I you suggest trying to run the program as administrator and check if this can help, right-click on the program and click Run as administrator.

  You can also try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Mfc100.dll of error missing at the launch of the application

  I installed a program in Windows 7 Professional.  executable file was built using visual studio 2010 in windows xp environment. After you install this Setup program in windows 7 then I try to run the application error message indicates "missing mfc100.dll with the launch of the application". Then I installed "Microsoft Visual C++ 2010 Redistributable Package vcredist_x86.exe" but no luck. This time not shown but error message by double-clicking the exe or run as administrator could not start the program. Also tried copying the dll files in the exe directory.
  Also tried regsvr32 mfc100.dll in the command prompt. This time, the error message is "mfc100.dll was loaded, but the DllRegisterServer entry point was not found"

  Hello

  The issue you described would be better served in the MSDN forums.

  These are two specific forums because I think that you have two different issues:

  http://social.msdn.Microsoft.com/forums/en-IE/category/VisualStudio

  http://social.msdn.Microsoft.com/forums/en-IE/category/vsdbg

  I hope this helps.

• I bought a plan of the student, but he is not be enabled in the application.

  So bassically.

  The problem is simple, try to solve it, it gave me headaches...

  So in my Adobe account, you can see that I have a Plan of the student teacher. (Photo1).

  But in my application cloud creative, you see that he has not activated (Photo2) and whenever I try to put the licensed software, it says that I don't have a license...

  But in Photo1, you can clearly see not that I have a plan of the student teacher.

  The creative cloud app is on the same email that my Adobe account.

  I tried to reinstall everything and nothing works... Please I need your help soon, because I need it for school.

  My school has already started: S

  Hello

  Please, try the steps below and see if it helps, there could be software of third parties in conflict with it:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see Windows Firewall enable or disable - Windows help , OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • After this sign off cloud creative app connect and disconnect activate Cloud Creative applications
  • Force quit Adobe all activity monitor processes / end of task from Task Manager in the case of windows (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  MAC-

  Right-click on the icon in the Finder and select the 'Go - To' folder option.

  You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  New > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  Then go to the Application Support > Adobe > rename SL-STORE like SL-STORE_OLD

  WINDOWS-

  C: \ directory Users\ ------AppData\ Local\ Adobe\ trash OOBE and AAM Updater folder

  C: \ Program Data-Adobe\ rename the SL-STORE like SL-STORE_OLD

  • Empty the trash
  • Launch the creative cloud and connect to connect and disconnect activate Cloud Creative applications

  Also do this where it's a windows machine:

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "automatically detect settings" is the only option selected, open the LAN Properties window.

  Let us know if that helps.

  Kind regards

  Bani

• Referring to data files contained in the application JAR file

  Hello
  
  My application needs referencing files in folders that are part of the application JAR. I have tested locally with NetBeans and it works fine. However, during the launch of the server, the application search for files in the downloads directory (where the JNLP file is saved for the launch). How can I get the application to search for files in the JAR file, where they reside? TIA!
  
  Bob

  FractalBob wrote:
  .. AHA! Thank you! It's exactly what I'm looking for.

  Please mark my answer as "correct". ;)

• the logo image is not placed in the application

  Dear Sir.
  
  What I've done
  
  I got gif image ias d:\image\raghu.gif
  
  I went to shared components where to find images. I went through and found the image above and clicked the button transfer.
  
  I've just provided by the second time and got the message that I already raghu.gif
  
  I went to the application definition under where I chose the image clicked
  under such logo as mentioned in the response to the forum I wrote /i/raghu.gif
  
  under attributes of logo that I gave the value like width = "300" height = "50".
  
  while I'm trying to run the box logo / border appear correctly but no image displayed just a big X mark only displayed.
  I tried different options mentioned in the google search and this suggestion of members of the forum also. Everything happened with vain.
  
  help is needed
  your
  Dr.s.Raghunathan

  Works for me.

  Type of logo: Image
  Logo: #APP_IMAGES #apex_64.gif

  where the image has been transferred under the application.

  Check it is associated with the application.

  No matter what image file your target browsers are able to display can be used.