The installation of the manufacturer DVD read error: "insert a disc.

Similar Questions

• CAN RECOVERY OPERATION, YOU HELP ME? Have a reader of CD/DVD read error problem

  Hello

  My computer is a HP Media Center PC m7377a
  SYSTEM No. EP019AA #ABG
  OS Windows XP Media Center Edition 2005

  Can anyone suggest what I should do now?

  Seem to be stuck in recovery mode. Cannot use the hard disk partition? Cannot use my recovery disk in the disk drive?

  I had my computer about 4 years from new. For all the last 2 + years my CD/DVD drive did not work, reading or writing. It will read the strange music cd sometimes? Its really almost never used. I tried update and the restoration of pilot operations in the past, but it didn't work. Not knowing what it takes I managed without the drive.

  In any case with the PC is a bit slower now I thought that I follow the instructions and do a restore full and hopefully get my DVD usable return. As it do not write I could not save another method used with her, and she can't read I thought I can't use recovery discs.

  After reading about the recovery of hard drive partition, this is the way I went. When I started the recovery process, I had left the disk 1 in the drive by accident. I don't know if this would affect what I chose to do hard drive recovery.

  He began the recovery and at some point, I got a CD/DVD read error msg!, press a key to continue. What I did.

  Therefore, I was round and round in circles. Here's what another msg of receipt:

  No system disk or

  Disk i/o error

  Press any key to restart

   

  Restart, and then select the appropriate boot device

  or insert the media in the selected boot device, press any key

  Another msg was:

  NTLDR is missing

  Press Ctrl + Alt + Delete to restart

  I can get to the HP Invent screen several times, tried all sorts of roads so he can continue the recovery from the hard disk and the disk

  I did a post of a member (c0rnel) on NTLDR missing msg. Struck me most, erased the hard drive? thought that it was sorted, but still ended with a CD/DVD read error! Msg.

  I got the dvd spin sometimes when load, and jarring, as his tent to do something? I was in the screen of HP recovery after pressing F10, on-screen where to transfer files between folders and says load disc 1. But when you load it in, you can hear it try? But nothings happening.

  I don't think that theres a problem with the discs. Because the CD/DVD drive acted like this for a long time with the bar more each disc a little.

  I have no idea why it never went through the recovery of the hard drive, I selected. Unless it is no good either.

  Questions

  1 / what can I do with my player so he can read the recovery disc to reload the o/s?

  2 / which component inside actually reads the signal from the reader, what is more likely to be at fault? Does need something

  replacement?

  3 / If the real DVD drive is not defective, reloading of the o/s would bring the reader to functioning again.

  Or like I asked to question 2, there is another component that reads the signals in the drive, which will always be what

  replacement?

  Any Information or advice on how I can best proceed from here, would be greatly appreciated.

  Thank you for taking the time to read my post.

  Andrew

  The only thing outside the laser in the DVD player, which controls the DVD player is the motherboard. Start with a cd or a dvd is totally independent of the hard drive. Evidence which is Live CD, which contains an operating system and can run an operating system such as Linux together without a hard drive is still present...

  Is not yet 100% confirmation that your drive is bad because I've seen other Media Center Edition to the owners recovery discs awhile very difficult (and sometimes never work). The fact that you mention she had problems reading of CD, even the music indicates it is defective.

  Most stores do have a return policy, so check it before you buy it.

• USB mass storage shows as removable disk. When I have the Explorer, it insists on the fact that I have inserted a disc.

  Original title: USB mass storage shows as removable disk

  an external hard drive appear in devices such as a USB media device, but in Explorer windows as a removable drive; When I have the Explorer, it insists on the fact that I have inserted a disc.

  After a windows upgrade restarted the computer, windows Explorer showed the USB mass storage. Everything is OK.

  Thank you.

• the usb disk read error

  I have problems reading from usb drive I use following

  path = "file:///E:/ChoferesRecreo";

  You can only read SD card or a card internal inside the device, or simulated in the Simulator.

  To run the SD card simulated in a directory on your PC, use the menu to "Simulate" (part of Windows Menu, no menu BB) on your Simulator.  Note that previous simulators were not able to use directories, according to me, which came with simulators for 4.6 and above.

• I have a Matshita DVD/CD UJ890JS. I need to know how to activate the readability of the disc and the ability to read and format new discs.

  I uninstalled the device and reinstalled it which didn't work. Even downloaded the drivers and software do not help. I have too much important data on my computer to make a full recovery, is not an option.

  Help!

  Maybe the disc is worn out?  You can buy a replacement for it for $20, and you can buy an external DVD/CD burner for as little as $30.  Those external plug into a USB port.

  Once you have your system back as you I invite you to buy an external hard drive and a good 3rd party backup program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is about $90 these days and a very good FREE backup program is the Easeus todo backup free that you can download from
  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Satellite L30-101 - DVD read error CD player

  My carpet * a DVD UJ-850 s recognize that occasionally an audio CD - I get a prompt "Insert the disk in the drive" as if there is nothing there. When downloading iTunes CD music, reader recognizes best 1 on 3 CD.

  If I remove the CD and clean it sometimes recognize the drive when I reinsert, but not always and it frequently does not recognize new disks. Player does not seem to have a problem reading DVD and burn a disc if I can get it to recognize the blank CD.

  Is it a question of laser? My drivers are up to date and Device Manager claims the player works correctly. It should be re-install the drivers?

  I'm running on Windows Vista.

  Hello

  It is not easy to say why this happens especially if the issue occurs sometimes.
  Always is it that ODD (optical disc drive) laser has a different position for DVDs and CDs so perhaps is there a problem with the calibration of the laser.

• Unable to add data to the Virgin DVD + RW double layer after having ejected backup problem.

  Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.

  Hi sal69,

  This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.

  You can follow the steps mentioned in the link below

  You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista

  http://support.Microsoft.com/kb/928355

  You can download and install the latest service pack on the computer

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot boot Linux from the CD/DVD USB drive - NB200-10z

  Hi all

  I try to install linux on my nb200-10z fedora11, but a strange thing happens: when I choose to boot from the cd/dvd and I insert my DVD my laptop boot linux normally HD; If for example, I insert the recovery dvd created with the toshiba utility, it starts on the dvd rom usb...

  A that someone has experienced the same problem? y at - it the possibility to solve this problem?

  I also noticed that if any usb cd/dvd-rom is present, the bios boot options show all cdrom option in the start menu

  Thank you

  Hello!

  Well, to me it sounds like it's the Linux boot disk isn't working properly if you can start the Toshiba Recovery disk successfully.
  Have you tested the same disk of Linux to another computer or laptop?

  In your case, I would try to burn the Linux disk again and use high quality as Verbatim DVD - R or TDK media.
  Never had any problems with the two manufacturers.

  Good luck!

• Sudden video card reader error causing freezing

  I use first items 11 and suddenly it started showing the video card reader error trying to create a new project or open an existing one. The error that says detected Adobe one driver incompatible display GeForce 9600 GT/PCIe/SSE2 3.3.0 and ask me to update the driver. If I click OK on this message Adobe starts, create or open a project, but freezes. I can't even close the application that the computer does not respond to Ctrl + Alt + Delete and so I have to force restart it. When it freezes, I see two Adobe logo at the bottom of the screen in the taskbar as if she would try to open the application twice.

  I have the latest video card driver installed: 340.52 version. In addition, Premiere Elements opened and worked without problem before and I haven't changed anything in my video card driver before the error started to appear.

  Any idea what can be the problem and how to fix it?

  Display & Baddriver http://forums.adobe.com/thread/1370916?tstart=0 driver

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• How can I get specific information on my DVD reader/burner? I would get the name of the manufacturer and model number, for example.

  I just bought '100 DVD + R16X for professional' discs to Taiyo Yuden to use for the archiving of the files on my computer.  There is a notice that came with the discs saying they are nine 1 x-16 x speed DVD + R (Compatible high-speed drive), and should I make sure my Player DVD is in line with the new 1 x-16 x recording standard.

  I would like to know how can I determine if my drive is in line.  The information I could get, is that the drive is a device of "ATAPI DVD W DH16w1P ATA."

  Maybe if I can learn more about the manufacturer and the model I can find if the drive conforms to the standard.

  I'd appreciate any help!

  Hello tjjfitz,

  Great choice in the media from Taiyo Yuden which is one of my favorites (Japan, Singapore, Taiwan) for their dyes they use! Regardless of speed, use the slowest speed to burn your backups, they will last longer and are less likely to contain errors. I burn my backups at 4 x which, Yes is slow, but the quality of combustion is what matters when you want to get more long shelf life of your discs. I also recommend Virbatum (Japan, Singapore, Taiwan) too! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.