installation of the external hard drive Seagate FoFlex Office

Similar Questions

• How to back up files on the external hard drive Seagate?

  Original title: Seagate backup

  Can someone help please, I bought an external seagate drive upward and it told me that I could just drag and drop to save on it, but that does not I get a Seagate dashboard mount and install, but it was only for a trial, if I don't want to buy it.  Any help please

  Thank you

  Can someone help please, I bought an external seagate drive upward and it told me that I could just drag and drop to save on it, but that does not I get a Seagate dashboard mount and install, but it was only for a trial, if I don't want to buy it.  Any help please

  Cancel the installation of Seagate, open 'Computer', find the Seagate drive letter and start using it like any other drive on your system.

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

  My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

  Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• Seagate: the external hard drive is not displayed in my computer

  My seagate external hard drive does not show in my computer and also the Disk Manager but its shown in Device Manager. help out me. I have a lot of data in it.

  

  

  Nitesh salvation,

  Thanks for posting your question in the Microsoft Community forums.

  I understand from your description you have posted, that the external hard drive is not recognized by the computer of Windows 8.

  Before you continue with the troubleshooting steps, please answer the questions below.

  (1) have you checked with different ports or different computers?

  (2) remember to make changes before this problem?

  (3) you are able to detect the drive in disk management?

  I suggest to follow the steps below and check if the problem persists.

  Method 1: Run the troubleshooter of material and check out la.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to show the charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  If you are able to detect the drive in disk management, I suggest you to assign a letter.

  Method 2: Assign drive letter:

  The disk management.

  To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
  To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.

  To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.

  You can also check out the article below and follow the instructions.

  Why isn't Windows does not find my device?

  Hope this information was helpful, if you need help, feel free to post. We will be happy to help you.

• Cannot transfer pictures to the external hard drive (refused)

  Hey!

  I can't transfer jpg on my computer to my external hard drive all of a sudden. He's worked a lot of years and now when I try to drag the photos on it gives me a stop sign, that white circle with the diagonal line through it. What gives? Any help would be great appreciated! I have a lot of work there.

  Additional information:

  -J' have permission to read and write on the jpg photos, but the disk that he said that I can read only, and there is no way to change this, when I click on the little triangle down.

  -I can drag photos that already exist ON the disk hard ON my desk, but not vice versa

  -All files are jpg files, and they are in a separate folder on my desktop, not from my iphoto library or whatever it is

  -J' also tried to delete the "com.apple.recentitems.plist" of the finder, and nothing has changed

  -The disc model is a "Slim Seagate laptop drive"

  -Here is a photo of the hardrive info:

  

  Thank you

  The external HARD drive is formatted NTFS, which allows you to write on it unless you have a third party app like Paragon or Tuxera.

  You had these software installed by Seafgate in the drive, but it is now obsolete and should be updated.

  Ciao.

• How to partition an external hard drive Seagate

  My old external HD Time Machine does not so I bought a 2 TB Seagate Backup more Portable Drive to replace it. It has been formatted for Windows but provided a configuration "NTFS_ Mac download for_ I ran. I'd like to partition the drive & use 1 TB for Time Machine.

  When I go into disk utility, I cannot and select the Seagate HD, the choice of the Partition is grey and not selectable.

  Any suggestion how to get this HD formatted correctly so that it is recognized in disk utility?

  I guess that the external hard drive is formatted NTFS, so disk utility does not have to perform all the tasks in this topic. It you can't format it on some Windows system with the FAT file system? Once the FAT is made, the Mac of THE it reformats with HFS. However if you want to do with the above partition size (1 TB HFS and 1 TB NTFS or FAT) then can try you with a disk management utility. Read more external for Time Machine & Windows hard disk Partition

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• How to use the book of fonts with fonts that are installed on the external hard drive

  I have all my fonts to a folder on an external hard drive. How can I use font book to manage these fonts? I want to keep on the external hard drive, not book fonts move them to my main hard drive. For some reason, font book does not know where are the fonts and as soon as I show, he sets in motion all the fonts on my hard drive in a folder/library/fonts. NOT what I want! I don't want thousands of fonts clutter up my main hard drive. I just can't understand how the font book. Only option, I can see, it is 'Install' and it is then the copy begins. I read and tests all day and I just can't understand this. Thanks for your suggestions.

  Font book handles only the fonts that are present in one of the folders of fonts on the startup disk. It can disable these fonts, but it won't work as a custodian of the fonts installed also. I would have suggested using a symbolic link to the folder fonts on the external drive to ~/Library/Fonts, but apparently that no longer works: allow to use symlinks in ~/Library/Fonts

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?