Installation of the HP 550 display driver > black screen; restart: black screen.

Similar Questions

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• Start the computer to a black screen after the improperly installed display driver

  original title: display driver

  I installed the wrong display driver and now black screen when the computer starts

  Hello

  Start mode safe mode with networking.

  Go to the website and get the correct - driver download but don't install it yet.

  Control Panel - device - graphics cards - right click on the adapter Manager - UNINSTALL-
  Check the box - DRIVER to REMOVE when complete reboot safe mode.

  Now, install the appropriate driver.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Re: Satellite P500-12F - cannot install the new nVidia display driver

  Good evening

  I'm sorry for stupid question, but I don't know what to do. I have the Satellite P500-12F.

  I tried to download the new graphics drivers for the NVidia card, I went to the site of NVidia and downloaded a new driver, which dates back to December 2009, instead of mine, which is July 2009, however, when I try to install it, the system indicates that Joana does no hardware that is compatible with the new driver.

  Could you tell me, what am I doing wrong? I could use any guidance as well. Thank you very much!

  Hello

  Why you try to use the nVidia display driver? These drivers are not pre-tested on the laptop and installation is at your own risk! In the worst case, you could destroy the graphics chip.

  As Akuma written already using the latest drivers Toshiba because they are pre-tested.

  Why you want to update the display driver? You are not satisfied?
  Remember: never change a running system! ;)

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Satellite Pro M30, it is recommended to install the new nVIDIA display driver?

  I own a laptop Satellite Pro M30, which includes a GeForce FX Go5200 GPU from nVIDIA. On 27 July, nVIDIA has released a new driver and related software (version 61.77), as indicated by nVIDIA, fits all the its GPU.

  I tried to install this new driver on my laptop (after removing the old driver following the instructions by nVIDIA) but it does not install. Does anyone have an idea why?

  Why the new driver is not displayed on the Toshiba support site driver for this laptop?

  Hello

  All drivers are designed and tested to laptops and Tom is right about producer for laptop. This means that you can find the download page for all drivers needed on Toshiba.

  As much I know Toshiba supports the drivers shipped with the device drivers and updates if necessary.

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• Qosmio X 500 Display driver blue screen

  "Recovered" crashed past regularly, but this time I even had a BSOD on the latest TOSHIBA nvidia display driver, so using the latest drivers TOSHIBA IS NOT YOUR PROBLEM. (as others State)

  TOSHIBA drivers already come from the stoneages compared to the NVIDIA drivers itself, but also prevent the laptop to get messy, that I stick to the toshiba driver download page. Invane it seems. Please update the display drivers as soon as possible.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2067

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA800D67F010
  BCP2: FFFFF88005936904
  BCP3: 0000000000000000
  BCP4: 000000000000000D
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Installed the drivers: 26/07/2010-8.17.12.5912
  NVIDIA GeForce GTS 360M

  Hey,.

  Can you post a few more details?

  When did you notice the same problem? Is it while playing games or in windows?

  Are you using the Windows 7 preinstalled Toshiba or your own installation, and if so the same thing happens with display drivers recovery disk?

• Impossible to achieve the "tilde" key in order to maximize the frame for display in full-screen first:

  I'm on a Norwegian keyboard.

  I tried several approaches, but none seems not to work.

  Ran out of options.

  I am able to do this symbol with shortcuts in a word processing program like that ~

  I use mac.

  Another thing how to display playback full screen and a black border?

  You can ask at http://forums.adobe.com/community/premiere_elements/content or http://forums.adobe.com/community/premiere/content

  This forum is about the cloud as a process of delivery, only not on the use of individual programs

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• Cannot adjust the brightness after display driver update on Satellite L855-118

  Hello.

  I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

  I did a restore point.

  So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

  So I used my restore point.

  This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

  Someone knows how to solve this problem.

  My spec full in the link below.

  Satellite L855-118 - product specifications - Toshiba

  Thank you

  John.

  You mean that you can not use the Fn or Fn + F6, F7 button combination?
  Do other combination works properly?

  Also check this doc:
  http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

  There is a brightness.zip that installs the additional registry key

• Satellite Pro L300 1AD is unable to install the Windows XP display driver

  I just installed XP on my Satellite pro because my internet modem doesn't work with Vista.

  I went to the main site of Toshiba to install display drivers, but they moved it, it keeps bringing the message "this driver is not for this computer please contact manufacturer.

  I put t understand why because all the other drivers that I downloaded on the same work, it's just the display one page. Does anyone know what's wrong?

  You have downloaded the latest driver for Satellite Pro L300?
  On the Toshiba site it s version 6.14.10.4953.

  An alternative, you can try the drivers from Intel, but normally the Toshiba driver should work.
  I always use the driver from Toshiba and never had any problems.

  Furthermore, I looked on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• The Satellite A200 display driver update do not work

  I tried to uppdate the displaydriver of my Satellite A200 (PSAE0). I downloaded from toshibas website. 7.14.10.1461 driver version. (vista 32 bit).
  But when I try to install the exe, I received a message that the computer do not have the minimi requirements to run the program.
  What could be the problem?

  I tried to update the driver removes I can't get any picture in WinTV, only sound. Used with the Hauppauge Nova-TD USB tv card.

  If you have installed some drivers Nova-TD or software I think you have screwed something.
  Achieve the clean OS install and you will see that you will need to install the driver to display without any problems.

  In my opinion it is certainly not a driver problem. The same driver, you can find in the recovery image and all proposed pilots are tested. So the problem must be something else.
  A few weeks ago I ve made some experiments on Satellite L500 nine friends. I tried to install the tuner TV USB Toshiba and Savvy TV software. Later, when I tried to run the software, I got message that laptop has not enough RAM or something like that.

  Something wrong with all this. Using other applications, everything works perfectly.

  So I think that there is something wrong with your software and additional hardware.

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• HP Pavilion HPE h9-1100: Installation of the graphics card... Screen is not displayed. NEED SERIOUS HELP!

  Hi, so I recently got a new "XFX Radeon R9 285" graphic card PCI - E 3.0 and installed in my PC, I went to start it and the screen does not light. The PC boots, the fans run and everything just no display. It works with two other Radeon PCI-E graphics cards, but it does not start. 285 graphics card works in another computer, but will not work on this one. I tried to uninstall the old graphics card drivers and no luck.

  Motherboard: Gigabyte M3970AM-HP (Angelica)

  Model: 2AC8

  Supplier of chipset: AMD

  Chipset model: RD9x0

  CPU: AMD FX-8150

  PSU: 600w

  RAM: 10 GB

  ORIGINAL OF THE GRAPHICS CARD: RADEON HD 7600 SERIES

  OTHER MUCH OLDER BUT WORKS

  Thank you for the additional information.

  Since you had the card running in another computer, you must have connected the two power connectors 6 pins.

  If it were me, I would XFX Service contact customer (800-880-3225) to see what they have to say about your problem.  It may be a BIOS problem.  They need the specifications of your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Installation of the disks without optical drive

  I have a new MacBook Pro with no optical drive.  How to install Photoshop I bought elsewhere (and has 5 DVD)?

  Download the trial of

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

  Make sure that you follow the Instructions very Important on this page first otherwise the links do not work.

  When you run tests, enter your serial number when prompted to convert them to the licensed version.