Oracle 12 c Grid Infrastructure OCR VOTE the disk size

Similar Questions

• Where should you install Oracle database and grid Infrastructure in order to comply with OFA?

  I downloaded two files compressed to the Oracle database installation, and both zipped install files for the grid Infrastructure.  The book I'm following for installation is said to use a directory of the database and a directory for the grid Infrastructure, but it does not explain where they should be located in OFA.  Probably they should both close up somewhere in the same Base of Oracle (since all Oracle related on a single file system should go in the same basis, according to my understanding), but it is not clear where they need to be installed over the other.  For example, the grid Infrastructure is a separate product that gets its own Oracle Home?  Anyone can shed some light on this process?

  Also, does it matter where the zipped files are uncompressed?  For example, use one of these files after the installation process, or OFA only cares location after installation?

  887504 wrote:

  I downloaded two files compressed to the Oracle database installation, and both zipped install files for the grid Infrastructure.  The book I'm following for installation is said to use a directory of the database and a directory for the grid Infrastructure, but it does not explain where they should be located in OFA.  Probably they should both close up somewhere in the same Base of Oracle (since all Oracle related on a single file system should go in the same basis, according to my understanding), but it is not clear where they need to be installed over the other.  For example, the grid Infrastructure is a separate product that gets its own Oracle Home?  Anyone can shed some light on this process?

  Also, does it matter where the zipped files are uncompressed?  For example, use one of these files after the installation process, or OFA only cares location after installation?

  Yes, they go in separate oracle_home.  This should be explained in the respective Setup Guide.  This will be a CAR or a standalone ASM?  I have

  It does not matter where you unzip the installation files.  They are only used for the installation.

• Oracle for Windows grid infrastructure.

  I am very new to the world of the Oracle, please forgive me if my question is stupid.
  
  I currently practice Oracle on my Windows 2008 Server. When I try to install DSO, I found that I need to install "Oracle Grid Infrastructure". Okay, I went to download page of Oracle o, I found the "Oracle 11 g Release 2 (11.2.0.1.0) grid Infrastructure. But he has Linux\Solaris\HP-UX\AIX\zLinux to choose. Where can I find the version of Windows?

  new4oracle wrote:
  I am very new to the world of the Oracle, please forgive me if my question is stupid.

  I currently practice Oracle on my Windows 2008 Server. When I try to install DSO, I found that I need to install "Oracle Grid Infrastructure". Okay, I went to download page of Oracle o, I found the "Oracle 11 g Release 2 (11.2.0.1.0) grid Infrastructure. But he has Linux\Solaris\HP-UX\AIX\zLinux to choose. Where can I find the version of Windows?

  eDelivery. Oracle.com

  Select the media pack for your version of oracle. When you go down, there will be several to download zip files. the first two are in the database, the third is ASM/IM

• Errors in Oracle 11g R2 grid infrastructure Installation

  Hi all
  
  I went through the steps to install Oracle 11 g R2 on RHEL 5.2 (32-bit) Infrastructure in a couple of Vmware machines.
  
  -As I pressed the Vmwaretool for the time synchronization, I didn't configure NPS.
  -As I do not have a DNS server, I configured the scan-cars in/etc/hosts.
  I know in production, it won't, but this test env is Ok (according to http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php)
  
  All the configurations went well and the YES continued successfully up to the
  He reached the last step: "Oracle Cluster vérification Utility" which, as expected, failed.
  
  It generates the log long and complicated according to: http://www.ahmedbaraka.com/temp/installActions.txt
  
  My question is: do you have any errors in the result of the newspaper from the SNP and SCAN issues? Are there other problems discovered?
  
  Thanks in advance.

  It could be fair to ntp.

  The following note might be useful:

  CTSSD works in observer Mode even if No software synchronization time is running [1054006.1 ID]

• Oracle Grid Infrastructure for a stand-alone server - licensing

  Is a separate license required for the Oracle Network Infrastructure when you use Oracle Grid Infrastructure for a stand-alone Servicer?  I compare it to non-GI installation where the database using cooked file systems for storage, and so only the database is allowed.

  Env:

  
  

  • Oracle 11 g grid infrastructure
  • Standalone database: Oracle 11.2.0.4 64-bit Enterprise Edition
  • Windows Server 2008 Standard

  Thanks for the advice / references.

  Tony

  As other posters have suggested, better check with Oracle.

  There is a good reference here in the docs of Oracle Online license, https://docs.oracle.com/cd/E18248_01/doc/license.112/e10594.pdf

  in respect of infrastructure of grid / search "components of Oracle Grid Infrastructure.

  It would be useful to check around popularity of ASM / GI on windows. I worked between some flavors of * nix & Windows, ASM is great, but not a huge number of Windows installs that I have come across seem to use it. I'd certainly * nix however if (even if not!) considering the DSO. Sit together much cleaner

• Oracle Grid Infrastructure PSU 11.2.0.4.3 (18706472)

  Hello

  I applied Oracle Grid Infrastructure PSU 11.2.0.4.3 (18706472) for Linux - x 86-64 but how to verify that the database has been patch AND IM has been fixed?

  Normally, I would do the following:

  . / opatch lsinventory-bugs_fixed | EGEP-i ' PSU | DATABASE UPDATE PATCH OF THE SET"

  and

  . / opatch lsinventory-bugs_fixed-oh/u01/app/grip | EGEP-i 'PATCH UPDATE SET GRID INFRASTRUCTURE.

  The first command shows that DATABASE UPDATE SET PATCH 11.2.0.4.3 has been applied

  However, the second command shows nothing.

  Thank you.

  Hello

  It looks like the 11.2.0.4 it has been renamed OCW (Oracle Clusterware PSU):

  What is the patches under 11.2.0.4 or 12 c GI PSU (Doc ID 1595371.1)

  11.2.0.4.x Grid Infrastructure known PSU issues (Doc ID 1912699.1)

  Although not the same, but here is the versions that I got on Exadata:

  [oracle@exadata01 OPatch] $. / lspatches opatch

  16937759; QUARTERLY PATCH DISKMON FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16937759)

  16619898; QUARTERLY CRS PATCH FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16619898)

  16869205; QUARTERLY DATABASE PATCH FOR EXADATA (JUL 2013 - 11.2.0.3.20): (16869205)

  [oracle@exadata02 OPatch] $. / lspatches opatch

  18522514; ACFS SET UPDATE: 11.2.0.4.3 (18522514)

  18522515; OCW Patch Set update: 11.2.0.4.3 (18522515)

  18825509; DATABASE PATCH FOR EXADATA (JUL2014 - 11.2.0.4.9): (18825509)

  Kind regards

  EVS

• Question about uninstalling Oracle Grid Infrastructure software

  
  Hello! I create a new cluster of CARS on IBM Power 7 server running AIX 6.1. I installed grid Infrastructure 11.2.0.3 as a 'practice' race, but I would like to make a few changes. I remember reading about a year on the Oracle uninstall utility 11g. Although it is installed as part of the software, it was recommended at that time to download the OTN deinstall utility.

  That it is always recommended, or can I just run the deinstall utility in my house grid Infrastructure?

  Thank you

  Mark

  Hello

  Please check below notes:

  11 GR 2 CARS: how re - install the grid Infrastructure without disrupting the facilities of RDBMS. [1276975.1 ID]

  Oracle has uninstall utility - 11 g R2 [ID 886184.1]

  Way of GR 11, 2 failed Installation of infrastructure (CRS) grid [ID 942166.1]

  11 GR 2 grid infrastructure - uninstall the rootcrs.pl script failed [1174384.1 ID]

  And please read this link: How to change or uninstall Oracle Grid Infrastructure

  Thank you

• Must I also patch grid infrastructure home with power supply?

  Hello

  I am building a new server to replace an old one with the following configuration:

  OLD Config: Oracle 11 g 2 EE (11.2.0.3) with POWER 16056266 block, on OEL 6.2 64-bit (file system)

  NEW Config: Oracle 11 g 2 EE (11.2.0.3) with power supply on OEL 6.2 64-bit, ASM (grid below) 16056266, 11.2.0.3

  If I understand correctly, grid Infra Software version cannot be less than that of RDBMS software. Because the RDBMS software must be patched with 16056266 power supply to match the existing server, I have a few questions:

  1. Should I ask a PSU 16056266 grid infrastructure home (I'm sure the answer is 'yes', but I want to ensure that)
  2. Is the same power supply for the RDBMS and grid infrastructure OR there is a download separate patch for grid below?
  3. I need to replace the existing 'OPatch"under grid infrastructure home with the latest [just like I do to patch House RDBMS]?

  Thanks in advance!

  Hello

  You must apply the following PSU on the grid below:

  BUG 16083653 - 11.2.0.3.6 (April 2013) Grid Infrastructure Patch Update (GI PSU) contains

  BUG 16315641- PATCH UPDATE SET 11.2.0.3.6(GI COMPOSANTS de l'INFRASTRUCTURE GRID)

  BUG 16056266 - 11.2.0.3.6 (April 2013) set of patches of database update (PSU)

  as mentioned in: -.

  Readme - Patch Installation and uninstallation of 11.2.0.3.x GI PSU [ID 1494646.1]

  Kind regards

  Dalia Sarey

• where is 11.2.0.2 grid infrastructure software

  Hi all
  
  I tried to upgrade s/w of database Oracle 11.2.0.1 to 11.2.0.2. However, I got an error message indicating that my grid infrastructure software was the 11.2.0.1 and he had to be upgraded to 11.2.0.2
  
  Can someone tell me where I can find this software, it is not distributed in the 11.2.0.2 patch group and I could not find in My Oracle Support because there is no obvious link to its location?
  
  Running on 64-bit RedHat
  
  Any help much appreciated
  
  Thank you
  Steve

  MOS = My Oracle Support to https://support.oracle.com

  You will need a Customer Support identifier (CSI) valid to log the site - a CSI is given when you buy from Oracle support.

  HTH
  Srini

• How to make a user to increase the default size of the disc during the action plan?

  I have the problem with the field of "Ability" to the default volume, which is gray, so users cannot change its value in the request. It is plan basis of creation of VM with only one disk configured (I don't need at all, but it took to fill to record the action plan) and 'Allow the user to view and change storage reservation strategies' is checked. Users can add new volumes, but they cannot change the size of it with ID = 0. There are screenshots of request and action plan in the attachment. vRA 7.0.

  Hello

  Its a bug that will be fixed in 7.1.

  If you are a user of the API, you can override the disk size by adding the custom property VirtualMachine.Disk0.size at the time of the request.

  Unfortunately through the user interface, currently there is no way to change the size of the disks added during the creation period.

• Workstation 8 - decrease the size of the disk

  How one decreases the size of unallocated drive in advance single file?

  Vmware-vdiskmanager a possibility to increase, but does not the disk size

  How to decrease the maximum size of 150 GB to 75GB?

  How to decrease the maximum size of 150 GB to 75GB?

  You have more then a few options and to name a few...

  Make an Image, like a ghost Image and drive him back a smaller.

  Add a smaller disk to the virtual machine and the Image directly from one to the other, and then exchange the smallest to the largest.  Ghost and that too.

  Use any other third-party utility to perform the foregoing.

  Zero free space on the existing drive and then reduce it (if VMware Tools are installed automatically retractable function zeros space free first) then resize the virtual partition to a smaller size, leaving half of it unpartitioned.  This prevents the drive to grow larger then the size of the new virtual partition size.  The dynamic (non-destructive) resizing can be done with a software like GParted Live.

  VMware vCenter Converter to create a new virtual machine when resizing of the hard drive.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• How to OCR and the drive to vote of raw devices for ASM diskgroup

  Hello
  
  I plan to upgrade my environment clusterware/ASM 11.1.0.6 to the grid
  infrastructure 11.2.0.1 on Solaris sparc 64-bit.
  I also plan on spending the OCR and discs of raw devices to ASM voting
  starts. But how to do? When should I do: upgrade
  process or after the upgrade? When should I start?
  
  Thank you

  create a disk group or use an existing disk group that matches your redundancy needs

  To ocr asm
  ===============
  1 ensure that the clusterware version 11.2.0
  # crsctl query crs activeversion
  Oracle Clusterware version active on the cluster is [11.2.0.1.0]

  2. replace the OCR file by the asm disk group
  #ocrconfig - replaced - replacement<+ASM diskgroup="">

  3 remove the old file ocr
  #ocrconfig - remove

  4. check the integrity of the ocr
  $cluvfy comp ocr n - verbose

  SE asm votedisk
  ======================
  1. Add the voting disk to the asm disk group
  #crsctl replace votedisk<+asm disk="" groupname="">

  Note: According to the disk group redundancy the required number of ocr and voting disk files will be created
  Normal: 2ocr, 3voting disc
  For the great: 3 ocr, voting 5 disc

  do not backup the ocr/votedisk dd in 11.2.0

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• Issue of INS-35354 when installing Oracle RAC 12 on infrastructure Oracle Grid 12

  Hello

  I am trying to install Oracle RAC 12.1.0.2 one node installation on Windows Server R2 2012, but the installer told me:

  'Valid [INS-35354] the system on which you try to install Oracle RAC One doesn't not part of a cluster.'

  On the same server I have is installed and running Oracle Grid Infrastructure + ASM.

  I don't know what is missing the installation program, which is possible to register? The installation program does not provide which had not passed the specific audit.

  Thanks for the tips

  Georg

  

  

  

  Hello

  A CCR node does not mean that you install the grid infrastructure in a single node and install a base of a RAC data on this node.

  Basically, a concept CAR is similar to active passive clustering to provide high availability. To have a node database RAC upward and launched, you will have to install clusterware on at least two server by selecting the option during the installation of the IM.

  Pls follow the below post for detailed answer

  INS-35354: validates the system on which you are trying to install Oracle RAC not part of a group when installing a 12 c RAC node database

  Concerning

  Krishnan