Installation of VMware on an external HD?

Similar Questions

• Satellite A660 - 11 M WLan cannot be used after the installation of vmware 3.1.1

  I have a problem with my new laptop Satellite A660 - 11M.

  When I use some VM install VmWare Player 3.1.1 the wireless doesn't work anymore.
  When I push the button to activate the wireless, the led does not illuminate and the FN + F8 key said that the wireless is not enabled.

  I tried to uninstall VMPlayer, but the rest of the problem.
  I also tried to reinstall the Wlan driver.

  Only if I ask a recovery point before the installation of vmWare are all ok.
  You have an idea about the problem?

  Thank you

  Hello

  I know that this question. the VM (virtual machine) is NOT compatible with the Toshiba Flash Cards Support utility.
  The virtual machine affect the functionality of the FN buttons.
  Therefore, delete this system in order to use the FN keys.

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius

• Selection of the method of Installation of VMWare Fusion 7

  So I take an edx online course: Introduction to computer CS50x. I am following the installation of VMware Fusion instructions found at the following link: https://manual.cs50.net/appliance/2014/fusion/

  I followed the instructions in step #4: I double click the icon of VMware Fusion. I clicked on 'Open' when prompted. I typed my administrative password. I accepted the license agreement. I inserted the license key. I am now in the window "select the installation method. But herein is the problem. I do not know what installation method to choose, and there are no instructions on it. My options are: (1) import of disk or image; (2) import existing PC; (3) install OS X from the recovery partition; (4) import a virtual machine existing; (5) installation of Boot Camp. and (6) create a custom virtual machine.  There are no instructions or advice to navigate through these options.

  Assistance would be greatly appreciated.

  From what you have posted, it seems to me that the merger has been successfully installed. The dialog box "Select installation method" you see is Fusion trying to be helpful and you guide in the creation of your first virtual machine.

  At this stage of VMware Fusion and eject the mounted disk installation image (so that you do not open the installation program when you must open the copy installed on your disk). Continue to step 5 to download your virtual appliance of the format .ova.

• Installation of VMware in VMware Player tools

  Hello

  I installed VMware Player v7, created a virtual machine (Windows) and wanted to install the VMware Tools via Player > manage > install VMware Tools... but nothing happens when I click on this option. The following 2 other methods I found in a Ko do not work either:

  • Enter D:\setup.exe where D: is the first CD-ROM drive configured for your virtual computer = > NOK as the virtual drive does not show the VMware tools.
  • Looking for the ISO file in the installation folder = > NOK: there is no ISO file.

  After searching on the forum, I realized that VMware Player doesn't come with VMware tools and workaround I used was to install VMware Workstation without a license on another computer, find the file "windows.iso", copy it to the computer, mount it as a virtual drive and start the client installation.

  The thing I don't understand is the reason for which the option is available in the VMware Player menu if the VMware tools are not? It's very confusing for people new to VMware and only install VMware Player...

  You need not download VMware workstation to get VMware Tools in VMware Player!  VMware Player 7 is working fine on my system and had no problem downloading VMware tools, so maybe it's a problem specific to your environment/system that may block recovery.

  Take a look at my answer: Re: VMware Tools missing in the Installation of VMware Player 7

• VMware Tools missing in the Installation of VMware Player 7

  Hi all

  If I try to install/upgrade to update VMware Tools after the Installation of VMware Player 7 no ISO will be connected to the virtual machine.

  I checked the directory of Installation of VMware Player for the ISOs of the tools but no ISOs are there.

  Can you help me out of this Situation or is it a missing element in the installer?

  Thank you

  Michael

  I just downloaded VMware-player - 7.0.0 - 2305329.exe and installed under Windows 7 x 64 and had no problems with it automatically detect installed VMware Tools to the guest operating system to be downloaded and successfully downloaded.  Having said that, have you tried? : Player > file > Preferences... > download now all components

  Maybe something is blocking you to download the VMware tools.

  You could also do it manually by using the following tools from VMware for VMware Player 7.0.0.

  • Tools-freebsd - 9.9.0.exe.tar
  • Tools-linux - 9.9.0.exe.tar
  • Tools-netware - 9.9.0.exe.tar
  • Tools-solaris - 9.9.0.exe.tar
  • Tools-winPre2k - 9.9.0.exe.tar
  • tools-windows - 9.9.0.exe.tar

  Unzip the file, then run the executable result and it will silently install the file without any indication that he actually did like this isn't really so planned how to do even if it works!

• 11i/R12 connection at the base of the machine during the Installation of VMWare host.

  Hello people,
  
  I installed 11i and R12 on VMWare. My host in Windows XP operating system.
  
  11i details-
  VMWare/Guest OS - Windows XP
  Version - 11.5.10.2
  
  R12 Details-
  VMWare/Guest OS - Red Hat Enterprise Linux 5.3
  Version - 12.1.1
  
  Everything works fine on the VMWare OS application and database (sqlplus).
  
  The problem is that I am not able to connect to the data base (11i/R12) from the host machine. I am successfully able to run the application from the host machine after you put the entry in the file "hosts".
  
  To connect to the database, I have installed the Oracle 9i on the host machine client and put the entry in the TNSNAMES file. ORA generated by 11i/R12, but even in doing so I am not able to connect to the database.
  
  Is there a way I can connect to the database (installed on VMWARE) of the HOST Machine.
  
  I've seen a single installation on VMWARE, where we are able to connect to the database from the HOST machine.
  
  Concerning
  Thémans

  Hello

  Review the troubleshooting document and see if it helps.

  Kind regards
  Hussein

• Installation of VMWARE

  Hello Nicolas,.
  
  I'm opting for the installation of VMWARE for PeopleSoft. I'm asking you to confirm if I download the good times...
  
  All of the following conditions are edelivery.oracle.com...
  
  We have the following of the Oracle Media Pack v3 VM2.1.0.0.0...
  
  Oracle VM server 2.1
  Source of Oracle VM Server 2.1
  Oracle VM Manager 2.1
  
  (1) should I all the above or just the Oracle VM 2.1 server and is the version ok that it is supported by Peoplesoft?
  
  (2) the Question is do I really need Cygwin (XClient and NFS) as directed by your blog...? I have the NTFS file system on my machine and the config is the next MS Win XP Prof SP2, 2 GB of RAM and hard disk of 120...
  
  Help appreciated
  Thank you

  "... You cannot use a SCSI CD-ROM drive as a boot device. If you intend to boot from the CD-ROM drive, please plug it like an IDE drive. »
  How to set the CD-ROM drive in your virtual machine settings? Try to set it as IDE(0:0).

  Nicolas.

• You want to move install Bootcamp or VM VMWare on the external drive and run it from there.

  I have two versions of Windows 7 on my iMac 24 "4 GB. One is a Bootcamp of Win 7 Professional installation.  One is a computer virtual from Windows 7 in VMWare Mac OSX. The two windows installs work well (the Bootcamp we're NOT accessible through VMWare right now).

  I want to do is get AN installation running on a partition on the external drive I connected. I have 3 partitions on a disk of T 1.  A 500 GB for Time Machine and 2 250 GB, Mac OSX and a Fat32.

  What I wish really is a straight Win BOOTABLE install on Fat 32 partitions, but will sag to move the VMWare installation to the outside OSX partition.

  Are there ways to do?  I thought Winclone, but as it is in oblivion I don't know about use.

  Any ideas?

  With the Virtual Machine shutdown, not suspended and VMware Fusion closed copy the target Virtual Machine hard disk external package and double-click it to launch the first time and it will fill an entry on the Virtual Machine library.

  The extent of the running Windows natively on a disk external Windows is not capable of it in itself although there may be some ways according to the type of external hard drive and various Boot Loader/managers that are out there.

• Problem Dell cutomized installation of VMware tools image

  Hello. I installed VMware-VMvisor-Installer-5.5.0.update02-2068190.x86_64-Dell_Customized-A00.iso on server r.620. HASH value of the file you downloaded is the same as on the download page. When I try to install tools on virtual welcome message pop - up tarball damaged for linux guests. Also for windows guests message that Setup cannot start. Is there any way to solve this problem without reinstallation of the system?

  Hello

  Here are some articles that might be helpful to solve this without having to reinstall the host.

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1003910

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1004820

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1023185

• Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

  I installed it,

  C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
  BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
  VMWare... VMware-player-version 4.0.3 - 703057.exe

  I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
  I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
  What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

  The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
  but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

  I tried the VMWare Player. It works very well.

  What I am doing wrong?

  Hey be based,

  The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

  1. raise some Code by signing keys: keys

  2. download and install Momentics IDE and install

  3. download and install Blackberry Simulator

  4 download and install VMWare

  5 disable all firewall programs including windows firewall

  6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

  7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

  8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

  9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

  10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

  11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

  12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

  13 open a sample application

  14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

  15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

  16. right click on the project file, and then select generate the project.

  17. then right click on the project again and select run as > BlackBerry Application C/C++

  18. If all goes well, everything should work from there.

  Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

  I hope this helps!

• I have a problem with the installation of FSX on an external hard drive.

  I want to put Microsoft FSX upward on an external hard drive (1.5 terabyte) but during the installation I don't see an option to install on a drive other C: I am given this option in installation?  I have Windows 7, 64 bit.

  Thank you

  hocdaddy

  Hello

  Please contact the Microsoft Community.

  I'd contact Flight Simulator in favor new assitance.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  In addition, you can also publish this query in their community as well-

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Let us know if you have other questions about Windows in the future.

• Installation of VMware NSX Manager fails the upgrade of VMware NSX Manager fails

  VMware NSX Manager installation fails

  Upgrade VMware NSX Manager fails

  Please passed under the KB article, it can be useful

  VMware KB: Understand and troubleshoot VMware NSX Manager

• Installation of VMWare Workstation 11 freezes with gray screen!

  Hello

  I know this is a very known issue, but difficult to solve, I can't install VMWare Workstation V11 (tried with the old version 8, the same) since as soon as I click Setup, I have a gray screen and installation seems suspended it.

  Tried the same thing with VMWare Player, same result, even with older versions...

  No way to close the gray screen, unless you kill the process.

  My case is laptop Thinkpad T510, native W7 64-bit, processor Intel i5, 4 GB ram, Java utility installed and 100% updated, Nvidia GPU, nothing strange.

  Microsoft Security essential only running, no other AV or firewall...

  I tried to save two files reading autour on this community, but this does not solve the problem.

  I see not what is a well known problem and it is absurd does not have a way to solve it on VMWare...

  Any help is very appreciated!

  Thank you very much

  Concerning

  Denis Ferrari

  Hi all

  problem solved right and - in my case - was a strange key with a small '' L '' name to cancel here:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\

  It may be useful

• Installation of VMware web client 6.0

  Where the installation?

  I downloaded the Vmware Vcenter VIM 6.0 installation DVD and do not see the installation on the drive?

  I do not see Installing desktop client VSphere but no "web client".

  Should I upgrade VCenter Server 6.0 and download the web client of him?

  VCenter server 6.0 to backward compatible is?  Manage a 5.1 ESXi host with VCenter server 6?

  Or should I upgrade ESXi to 6.0 before the VCenter Server?

  Thank you

  Yes, the vCenter is backward compatible. vCenter 6.0 supports the same 5.0 esxi

  You can check it out here: http://www.vmware.com/resources/compatibility/sim/interop_matrix.php

  the webclient service is installed with the vcenter. its not over a single installation.

  first of all, you must update the vcenter. then you can update the esxi server.