Installation of Windows 7 crashed after power loss

Similar Questions

• Inspiron 3646 not restart after power loss

  I put the BIOS is still on after power loss. But it does not work. The computer turns on after turning the power on. The version of the BIOS A04. On the site, said the new BIOS A05 but instead of downloaded BIOS file doc. What would you advise?

  Thank you!

  I just wanted to know all that tech Dell dispatched to install a new motherboard for my 3646 and this fixed the issue of recovery of AC.  He gets now as it should be when the value "On".

  So you don't have to bother waiting for an update of the BIOS, get your motherboard replaced.

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• Z600 workstation: workstation Z600 not auto start after power loss

  I use a HP Z600 workstation.

  BIOS version

  786 G 4 V0.3.54

  OS is duel boot Windows 7 Professional 64 - bit Ubuntu & 14.04LTS

  Using Setup F10 I have:

  1. active Advanced-> Bios Power On for all days of the week and took one hour for power on

  2. under Advanced-> Device Options, I enabled wake on lan

  3. under advanced-> power on-> Options after the loss of power, I put the option "always on."

  If push the power on button on the front of the machine, it auto starts with Linux.

  If I pull the plug, the machine switches off immediately.

  If I plug the machine in, nothing DON'T get PAST!

  It lights up. I have to press the button.

  If I unplug the machine and then plug it in and wait for the moment Pwoer of BIOS on, do NOT start machine or turn on at the set time. Again, I must press the button to turn it on.

  What I'm missing or doing wrong. The machine is used as a remote server. It should restart automatically after a power loss.

  Any help would be greatly appreciated.

  Nothing changed and the problem disappeared.

  Had a power outage for 4 hours in the building.

  When the power was restored machine automatically restarted.

  So pulling plug on Z600, machine is not self-priming.

  Be able to fail the entire building: boots of router, monitor, Z600 and machines.

• Computer Windows Vista crashed after installing Service Pack 1

  original title: SYSTEM CRASHED AFTER INSTALLATION OF SERVICE PACK 1

  Running Windows Vista Home premium. I get a message the an update for windows is available for Service Pack 1. A few weeks ago, I received the same message and proceeded to the installation of the update to Service pack 1. After I did, my computer crashed and I had to reinstall windows using the MS. technology Now I get the same message and I don't want to take a chance and run the update.  Why I get this message, and why it crashed?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Satellite Pro A210 PSAFHE - Windows 7 - crashes after the sleep/hibernation

  I have a PSAFHE Satellite Pro A210 running dual boot Windows XP/7
  With the help of Windows 7 - 32 or 64 - system always crashes after sleep/hibernate mode.
  This never happens with XP that sleeps and hibernates OK...
  There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  I like system 7 and use it on my other computers but without sleep/hibernate, I go back to XP.

  Hello

  > There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Sorry, mate, but you're wrong.
  All drivers for Win 7 for Satellite Pro A210 are available on the European driver of Toshiba page that I recommend you check out once again

  Given that this question does not appear using Win XP, I can say with certainty that this has nothing to do with the material, but it s a software related issue
  I recommend updating the graphics card driver

  In addition, there is a new BIOS for Satellite Pro A210 PSAFHE it s v2.0
  Check if you are using the latest version

• Installation of Windows 7 stopped after step "finish installation".

  During the installation, the process got to the step "Installation complete" and seems to have stopped. He remained at the same point now for more than 10 hours. Now what should I do?

  Pavilion Slimline s5704y PC

  I restart the computer. It comes up with "the installation program starts services. After a while, it says the installer does not start due to an error and I have to restart the computer and reinstall Windows 7. But it is immediately in the same message. I tried several different methods, and he repeats the problem. I think I have a problem that can only fixed by sending to the seller or the factory. Thanks in any case.

  It looks like a possible, true hardware problem, could be...
   
  You have this PC:
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=5049558
   
  Maybe one of these items might you get?

  • http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02970678&tmp_task=useCategory&cc=us&DLC=en&LC=en&product=5049558
  • http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01868333&tmp_task=useCategory&cc=us&DLC=en&LC=en&product=5049558
  • http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&tmp_task=useCategory&cc=us&DLC=en&LC=en&product=5049558

• Windows 8 crashed after update - dual-boot

  Hello all, I installed Kubuntu in dual-boot with Windows 8 (not 8.1) a weeek ago and both ran correctly. I've used Windows later than yesterday, and... Update! Win partition crashed after the auto with the Lenovo logo and 6 balls turning constantly.

  I tried to use Boot-Repair, but it did not solve my problem.

  An error occurred during repair.

  Please write down the following URL:

  http://Paste.Ubuntu.com/9044826/

  In case you are still having a problem starting, enter this address to:

  E-mail address is removed from the privacy *.

  You can now restart your computer.

  The start-up files [the operating system currently in use - 14.04.1 LTS Ubuntu] are far from the beginning of the disc. Your BIOS can't detect them. You can try again after you create a partition/Boot (EXT4, > 200 MB, beginning of the disc). This can be done via tools such as gParted. Then select this partition via the [separate/boot partition:] [Boot Repair] option. (https://help.ubuntu.com/community/BootPartition)

  I don't know how to read these newspapers, and I kindly ask someone to read it and to tell me something. Also, I did not understand the last paragraph, sorry.

  I have an image of Windows Backup in the case and a CD of Rscue to win. He ran, but I wasn't sure of its possible 'reaction' to the presence of GRUB. is it likely to create problems for my startup parameters? I heard that he is likely to erase everything on my HD

  THINGS THAT MAY BE IMPORTANT:

  -Boot-Repair is set to "Secure starting" (checked under "advanced options"), but is not my UEFI/BIOS.

  -analyzing sda4 you notice the presence of boot.ini, it has not been deleted after revenues of bootmgr?

  Hi Max,.

  Using the restore disc, we can format Windows and we will be able to format the partition. However formatting Ubuntu can contact Ubuntu support forums http://community.ubuntu.com/contribute/support/ubuntu-forums/ since they will be able to guide you to the best.

  Hope this information is useful.

• Windows 8 crash after reboot

  After a fight, I managed to install Windows 8 and after trying a few things out, by logging in to my email account, for example, I decided to stop and restart. I was presented with a fancy screen startup and after dragging my finger up found a box ask for my password, I was unable to complete my entry when the computer is empty. I had to resort to power and turn off before I was able to restart and the same result ensued. I've done several times?

  Please can someone explain the above?

  Hello

  Thank you for posting. I'm sorry to know that you have problems with the e-mail client. But not to worry. Let me provide you with useful information to solve the problem.

  Please answer these questions, so that we can better help you.

  1. what is the email client that you use (such as application of messaging within Microsoft Outlook or Windows 8)?

  2 you get any error message when you try to open the Email application? If so, please provide the exact error message.

  3 have you set up your e-mail account in the Mail application successfully?

  4 are you able to open other applications such as people, e-mail, etc.. ?

  Method 1:

  If you have the same problems with other applications (such as messaging, people, etc.), please run the troubleshooter app by downloading from this link: http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

   

  Update your hardware drivers. Special display drivers. If you are not sure of the update, contact the manufacturer of your computer.

  Hope this will fix the problem. If you still have the same problems, please meet us and we can help you better.

  Thank you

• question of host esxi4 after power loss

  After a loss of power, I have two hosts in vcenter which show that is not responding... I can SSH in them, but I can't connect with vsphere client directly to them or access it via https, I rebooted and restart services with no luck...

  Anyone have any ideas?

  Thank you!

  Shaun

  Can you access the DCUI interface? Try to restart the management agents. Make sure that the network parameters and the DNS entries are correct. View the logs. Real-time logs are visible by using ALT + F12 see if there is current errors displayed or any other indication of the questions.

  You can remove hosts such vCenter suggested by Troy ESXi?

  You can use this KB to remove and reinstall the agents to the ESXi host http://kb.vmware.com/kb/1003714

• Windows 8 crashes after installation costs

  I had some problems with my ProBook 4720 s this summer, and for the most part of it, would not depend on the screen. After I plug it with an external, it would work, but the image was dispersed. Today, on something better to do, I tried once more, and after that I tried to install a new copy of Windows 8 on it, somehow got fine screen. I finished installing and I wanted to update to 8.1 and durig download the screen was still dark and Windows crashed. Here's the minidump (http://sdrv.ms/19tJN7E) so if someone could tell me what the problem is.
  Thank you

  Junuz

  This was connected to an operating system file.  Please run a check of system files to check the system

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  Older drivers who need update

  agrsm64.sys 2008-11-10 10:01:35
  HECIx64.sys 2009-09-17 14:54:16
  Rt630x64.sys 19/10/2011 07:12:55

• Desktop screen blank after power loss

  This problem seems to have several solutions, but I think I've tried most of them.  I have Windows XP SP3.  Was in the middle of a copy of a floppy disk drive hard when the power failed suddenly.

  Now, the computer starts to an empty office of light blue, but without icons or the Start button.  Can use CTRL-ALT-DEL to run Explorer and run programs.  I can not start Internet Explorer from the Explorer.  Microsoft Help however starts Internet Explorer and I can move around the Internet.  Norton Internet Security begins at the start so I did not have a virus problem.  I tried the recovery system back to before the disaster but I get the same result.  I just tried the Microsoft Hotfix but still the same result.  This program, however, wiped out all my previous Restore Points.  I have tried all the suggestions of Regedit because I am not sure how they correct the problem.  My best guess is that a. DLL or. SYS file is corrupt.  Is it possible to determine what is bad by the processes or Services that are not running?

  Any other suggestions or corrections?

  PROBLEM SOLVED.

  Registry required a change to the value of Shell.

  REGEDIT

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "Shell" = "explorer.exe".

  I found that the value has been replaced by "progman.exe.

  After the reboot, the computer reported that he could not find a Restore Point from 26/10/2010.  I said not restore at a different point and he finished with a few slight differences in my usual startup; but the Desktop buttons and start were in place.

• Photoshop elements 14.1 (Windows 10) crashes after importing multimedia files in a catalog to convert

  In addition to 12.1 PSE, I installed PES 14.1 and converted to catalog.pse12db catalog.pse14db without any error message.

  Import... Download the pop media button to the top of the "Coppying - XX % Completed" progress window, which evacuated then at 100% and PhotoshopElementsOrganizer.exe crashes.

  Kill PhotoshopElementsOrganizer.exe with the Task Manager and go to PSE14 show media files had nevertheless imported free of errors.

  Adobe Photoshop elements 14.1 reinstalling does not fix the problem.

  Open a new catalog and importing multimedia files in this new catalog.pse14db runs without error.

  Catalog.pse14db contains the beginning marked more 6000 photos with Photoshop elements 3 (on my old PC with Windows 2000) and thus has been transformed several times during its history. The volume_table table includes readers/devices from the old PC, which do not exist in PCs today.

  Although I'm not familiar with SQLite, using sqlite manager (add-on Firefox) help solve my problem (if it's really a question of catalog.pse14db)?

  Any ideas for me?

  Thank you!

  Michael Weinert

  Michel,

  I took a break.

  Apart from that, I'm at a loss what to try next...

  A few days before Pentecost, I resumed outages by install the trial version of Photoshop elements 13, conversion of catalog.pse12db into catalog.pse13db, from Photoshop elements 14.1 and transform this catalog.pse14db catalog.pse13db.

  He has no problem now to import media files in this converted catalog.pse14db. I will continue using PSE14.1 with the converted catalog whatching to find errors.

  I wonder why the repair function on the Catalog Manager solves this problem, and what will be the opinion of the team of Adobe.

  BTW

  Import media files offer 'Get media' or 'Open' - what is the difference?

  Kind regards

  Michael

• M60: Turns off after power loss

  My M60 sometimes turns off immediately after unplugging the power supply (AC power or plug the laptop CC), instead of out on the battery even though the battery is fully charged.
  The battery is OK & the laptop starts regularly on the battery after pressing the on switch.
  The Toshiba Power Saver seems to work OK & I have the latest version of the BIOS.
  I always save my work before unplugging, but again, I do not like this behavior & would appreciate some good advice.

  Hello

  I agree with tom, and the device must be checked by the service. I think there is something wrong with electronic power supply. If the battery has only 20% of capacity by removing the AC adapter / CC unit should not stop.

  I hope that you will find what is the problem.

• Satellite M60/M55: Turns off after power loss

  Reposting because the original threads are locked.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15285&MessageID=55746
  My M60 sometimes turns off immediately after unplugging the power supply (AC power or plug the laptop CC), instead of out on the battery even though the battery is fully charged.
  The battery is OK & the laptop starts regularly on the battery after pressing the on switch.
  The Toshiba Power Saver seems to work OK & I have the latest version of the BIOS.
  I always save my work before unplugging, but again, I do not like this behavior & would appreciate some good advice.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19092
  Satellite M55 turns off by unplugging the power cable to unplug my laptop making rather that to the battery, my laptop will often simply turn off even though the battery is fully charged. Other time things work as it should.

  I had the motherboard replaced for another reason and was quite surprised to notice the problem after a replacement (but without reinstalling OS).
  The main suspect is the TPS and its pilot; A few months ago, a new version is released the Toshiba support site for M60 (although file dates are not fresh, and I think that I have installed this version earlier).

  So, I removed the GST and the GST pilot. I tried several times and it didn't happen again. Not even when I reinstalled the.

  During the test, I have disabled the HD write cache to avoid file corruption problems (but this slows down HD operation, particularly of hibernation).
  I don't know if it works because also earlier the computer would be closed only occasionally, not all the time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the result is.

  What to say dude. The problem is that this problem occurs ONLY occasionally and so it's not easy to find the real reason for these cases.

  However, I would try to give some useful advice, but first of all, it would be useful to know how old your battery.
  Fact is that batteries old and stressed loose clean performance very quickly.
  My battery is about 3 years and my laptop running on battery for 10-20 seconds even if it s fully charged. The performance is simple very low!

  On the other hand the problem could be related to faulty electronic power to the Board of Directors
  As you can see it's not easy to tell what's exactly wrong and as already suggested in other threads (locked), you should ask a technician for a control of the laptop.
  The guy could run diagnostics tests and can locate the fault.

  Best regards