Installation of WinXP SP2 on Satellite U300 - Intel ICH7M?

Similar Questions

• Re: Detection of Bluetooth, installation on WinXP SP2 32 devices

  Hi all

  I have Toshiba Satellite A200-1CR (PSAE0E) which has the internal bluetooth device (I think that the manufacturer is, pa3608u-1btm taiyo yuden co.) Ltd. has been unable to verify
  cause couldn't open the back casing of the laptop). I downloaded the latest drivers for WinXP 32 SP2 on the official driver for BT and BT monitor or Tohisba site.
  Toshiba Stack and has installed respectively (installation battery please plugin device which is not recognized by the operating system), when the computer starts it is
  hardware detection, but no specific information about the detected material other than "Hardware ID" ACPI\TOS1900; "Device Instance Id" ACPI\TOS1900\2 & DABA3FF & 0 (which I doubt is
  BT device, if not there is not trace device BT not even under hidden devices). I tried to install that manually, but this time OS complains that the software is not compatible.

  After Google search on the net and who cross through this forum, I found that WinXP 32 is usually prone to detect internal BT, possible solutions are:

  * Rename the %WinDir%\inf\bth.inf nth.bak and reainstalling battery Tohisba which did not work in my case.
  Changing certain variables/s under ...\TOSHIBA\Bluetooth Toshiba Stack\Drivers, which I do not know where or what?

  PS Do not forget that before installing the BT monitor and battery I uninstalled previously installed versions and purged the registry.

  Any suggestions in advance will be appreciated.

  Kind regards

  To be honest I didn t done that for a long time but if I remember correctly you need to the first BT stack install and after restarting the laptop simply allow BT using the FN + F8 key combination. After this BT driver will be installed and as final step BT module is recognized correctly and also listed in Device Manager.

• Installation of WinXP SP2 on a soft S51

  Hello world!
  I am trying to install Windows XP SP2 on a fresh and formatted S51 (8171-CTO) but, after the partitioning and copying files, the system does not start from the HARD drive.
  I even tried with any other operating system (Ubuntu), performing the same result. Partitioning, copy, first boot HARD drive fail.

  The HARD drive is good and well formats.

  Can you help me? Have you had the same problem?

  Thank you.

  Hey Netnubar,
  I solved the problem. I don't know HOW, but here's what I did:
  -changed the IDE cable with two other different - no effect.
  -re-installed the original HARD drive (who was working on another computer) and I tried to install an OpSys (Ubuntu). Once again, all good until the first start.
  -Tried again with WinXP, but this time after partitioning, I told the XP Installer FORMAT, not QUICK FORMATTING of the HARD drive.

  IT WORKED! ****

  Funny, but true.
  Now it works perfectly.

  Thank you very much for your help!

  Ciao,.
  Stefano.

• I can installi Windows XP SP2 on Satellite A300-15 has

  I bought the laptop Satellite A300-15 a, where Windows Vista was preinstalled.
  I want to uninstall Vista and load Windows XP SP2.

  Can I do this? All the drivers will work once I do this?

  Thank you

  Ravi

  Why not!

  Have you read some discussions on this topic here in the forum?
  Isn't it? So, you should do this!
  There are enough threads that are very useful.

  PS; new laptops series supports the controller SATA HDD and SATA drivers, which are part of the Intel Matrix Storage Manager, should therefore be included in the Win XP operating system.

  Use the advanced search option and check out this forum!

• Need advice on the installation of WinXP/2000 on Satellite Pro 4270

  Hello!

  (Sorry for the redundancy of this topic on this forum, too.)

  Please, any suspicion on this strange problem will be appreciated.

  I bought a used Satellite Pro 4270, with totally empty 6 GB drive, a pretty neat and apparently well kept machine...

  But, trying to make a new clean Win2000Pro installed on it, as previously successfully dozens of times on other PC machines, installation will be ending in a minute after that is to start with the 4 on setupdd.sys error!

  On WinXPPro new clean install, that the procedure will be stuck in less than 10 seconds, without any error at all...

  So, it might be the reason the cause?

  I tried several different corrective actions on this machine and guess several reasons, the cause, for example

  -the hard drive works fine on other machines and has also been fully verified and updated in shape at low altitude
  -copies of CD installation I tried several all work fine on other machines
  -the BIOS has been upgrade v2.70 just some time ago
  -the CMOS was turned off, i.e. in default some time ago
  -the machine was torn off at the minumum on audio memory, PCI, USB, etc.
  -the machine must be somehow strangely, which on the BIOS or HDD?
  -are there some 'weird' IDE or other driver disappeared on this case?
  -tests with installing Win98SE and FAT32 will not lead to a better result, just somehow different...

  Best regards

  Pete v.

  Hello Pete

  It's a really bad situation. If you do clean install of the OS you na? t need any special drivers. Everything must be preinstalled when installing the OS is completed successfully.

  If you have a few HARD drive replacement, you should try to use it and see if the HARD drive is certainly not responsible for this. The fact is that W2000 and WXP can be installed successfully on many other old models of laptops and because of that I can't imagine that it is not possible to do the same on your device.

  Is it always that W2000 is supported for this device and you can find that page to download all the drivers of W2000 on Toshiba.

• Installation of Windows XP on Satellite U300

  I need to downgrade my laptop from vista to XP pro. After "slipstreaming" the new drivers sata in XP, I installed windows xp.

  After installing all the drivers (and drivers from the chipset), I left two questionmarks. (other devices)
  I really have no idea what are these two devices.
  When I look in Device Manager it shows
  -devices instance id: ACPI\TOS620A\2 & DABA3FF & 0
  and the other shows the device:
  PCI\VEN_8086 & DEV_444E & SUBSYS_444E8086 & REV_01\4 5EDAD & 23F & 0 & 00E0

  Any suggestions? Or new drivers for Windows XP Home Edition?

  Hello

  A question:

  Have you installed all XP drivers such as mentioned in the installation instructions?

  Installation instructions are on the page of the Toshiba driver. You must follow the order of installation.

  By the way; the DABA3FF & ACPI\TOS620A\2 & 0 seem to be a driver of shock protection Toshiba HDD.
  In my opinion, you can find it in the HDD Protection Utility.

  However, the installation instructions should be cheeks and you should follow it!

• Satellite U300-14 b: can I use the graphics driver for the Intel page?

  My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

  The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

  I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

  Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

  Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

  > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
  Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

  Best regards

• Strange devices satellite U300-15 after the new installation of 64 bit Vista

  I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5)

  It was a display model used in the store where I bought, so I wanted to do a clean install.
  Using the recovery cd did not work. (Something about some files than couln can't be read).
  It is a really bothers me not at all because I want to run it with a clean Vista anyway, so I jumped into a Vista Home Premium 64-Bit UK + SP1 and installed it.

  After that the installation was done, I ran windows update to get a little more drivers for the few items that not have installed correctly.

  After that almost everything worked very well.

  Except:
  I had two entries in the called Device Manager device Base System. They are found under 'other devices '.
  I have looked around the site of toshiba for the drivers, but can't find anything that seemed as if it was the thing that I was missing.
  (Actually I'm not sure I've found the correct support page. I learned to http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and was able to select 3 versions of U300. U300 - ST3091, ST3092-U300, U300-ST3094)

  Everything on the PC works well: card reader, bluetooth, graphics card, wireless + LAN cable, keyboard shortcuts, sounds etc.
  The only thing that is not working is when I put it in mode "Eve". The screen goes black, the powerled stays on and the fans continue to operate. It is not possible to bring him back again if.

  Does anyone have an idea where to find these drivers?
  Or maybe just sort the problem of sleep difficulty?

  I reinstalled using the recovery CD and choose another language and thus skip the defective cd.
  But the sleep problem was still there.

  An update of the bios, mentioned in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=32002&tstart=15 solved the problem.

  I have always an idea that both devices are well...

• Satellite U300 unable to operate after the Vista upgrade installation

  A couple of days, I did a Windows Vista upgrade on my laptop Satellite U300 and since that time, my computer does not work. He tried to self-diagnose this himself, he told me to shut down the computer and restart. I do that and then the! 0xc0190036! 4099/69249 (Security-Licensing-SLC-Component-SKU-Home...) appears with a black background. I tried to launch the product recovery disc but computer wouldn't it.

  Can someone offer me some tips?

  Kind regards

  Barry

  Hello

  It's very strange
  How have you tried to install the operating system recovery disc?

  Boot you from the CD and have you followed the instructions on the screen?
  Or what is exactly happening?

  Usually, the recovery disk must format the whole HARD drive and the laptop to the factory settings.
  In addition, the Vista is already activated and it s not necessary to put keys series.

  I see in the error message something about safety licenses. I m not very well what this may be, but perhaps could be a problem with activation, who knows?  :|
  But as I said above, the Vista on the recovery disk is already enabled.

• Satellite U300-159 - blue screen after Windows 7 installation

  Satellite U300-159. I did a clean install of Windows 7 Home Premium 64-bit. Since the upgrade, it has blue screen every time you start after approx. 1 min. blue screen * STOP: 0x000000f4. The computer restarts it self after a while.

  I checked memory with 2 different programs. No errors. HARD drive checked - no error.
  Updated the BIOS, but get the error 1275 attempted using Toshibe updateprogram code.

  Anybody have ideas, what to do?

  Hey,.

  I m a bit confused about your ad first, you wrote that you did a clean install and then you wrote something about an upgrade
  What's true?

  Anyway, if you see the blue screen in safe mode too? If this isn't the case, it seems to be a driver issue because in safe mode no drivers will be loaded.

• Satellite U300 - peripheral unknown after the installation of Windows XP Home edition

  Hello

  I have a Toshiba Satellite U300 - 14Q (model PSU30E). I installed XP, but there are 2 unknown devices:

  -Memoria Controladora PCI - in English: PCI memory controller (I guess...)
  -Device present-day - English: unknown device.

  I installed all the drivers of Toshiba and Microsoft. What are the missing driver?

  Greetings from the Spain.

  Hello

  -Module PCI Memory Controller Missing Robson, that it is not available for Windows XP Home edition and it will always appear in the Device Manager. It should not bother you at all.
  -Unknown device, I'm afraid that you forgot something. I don't know what, but it can be map or maybe utility password drive controller.

  Please make sure that you have installed stuff all listed according to document Instructions of facilities. The order of the facilities is also very important.

• Satellite U300-15s - WARNING: Impossible to be able to control the Volume.

  Here are once again this return number...
  I have 100 forums comments, tried several methods but without success.

  First of all, some background: I have a Satellite U300-15 s, I had to install under XP SP2 for business purposes (sold with Vista). The audio chip is a Realtek ALC268. I reformatted the whole drive, wipping on the Vista recovery partition. My XP SP2 is a Version 5.1 (serial number 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2) in English (menus in French). The sound worked under Vista. I installed all the Windows XP drivers supplied by Toshiba on their web site. I updated the BIOS to the version of 15/12/08. When I use the sound mute button, I see the changing icon to mute to mute not (and vice versa).

  For the audio drivers, once I discovered this problem, I tried:
  -install directly from Realtek drivers out of their website (version 2.12) (uninstall the toshiba drivers, reboot, install the realtek drivers, reboot)
  -install the KB888111 and KB198658 (uninstall the audio drivers, install 1 KB, reboot, install second KB, restart, install the audio drivers toshiba, reboot)

  Indeed, I tried to reinstall the drivers 10' th time, including multi reboot.

  Does anyone of you have an idea?

  Steph

  Hello

  The right question is known to me because I had also after installing Win XP.

  The problem is that you need to install MS patches first;
  * KB835221 * and * KB888111 *.

  All laptops with Realtek audio chip needs these patches from Microsoft!
  After installing the MS patches, you should follow with the audio driver installation.

  Secondly, please follow the order of driver installation mentioned in the installation instructions txt file that is located on the European driver Toshiba page!

  Last but not least, you should know that the softwarw controls Toshiba is also responsible for Volume control, don t forget to reinstall.

  Oh. I forgot to mention that your Satellite U300-15 s belongs to the series of PSU30E!
  Choose this option in the form of driver download.

  Greetings

• I want to install WIN XP PRO on Satellite U300-111

  Hi all

  someone has an idea how to get driver RAID Serial ATA controller for toshiba Satellite U300-111 to install windows xp pro because it shows me a messege when I press on enter to install, he said:

  Installation of Windows XP Professional

  Setup couldn't find any hard disk installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. It can be to launch an installer of ro diagnosis provided by the manufacturer.

  Setup cannot continue. To exit Setup, press F3

  PLS HELP ME ON THIS

  Hello

  Please make sure that the Intel Matrix Storage Manager has been included in the installation of Win XP.
  During the installation of XP, the installation program will ask you to enter the 3rd part the sata drivers.
  Then you must press the F6 button und could include the Intel Matrix Storage Manager from the external USB FDD drive.

  I found many comments on it.

  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

  Good bye

• Satellite U300 - graphic driver Windows Xp problem

  I bought Satellite u300 with Windows Vista, then I kill vista and install XP.
  Everything is good video work - but only with the problem

  OpenGl - trolling
  All videos - late

  Help me!

  I downloaded the drivers from Toshiba site of the 20/02/08 Display Driver Intel Windows XP 6.14.10.4831 World Wide.
  Then to install it. After installation I have the same problems.

  After that I have an appointment on the Intel site and download the latest graphic drivers for 965Chipset express
  But when I m trying to install it I see - this leads isn t tested for this PC.

  Pls download required drivers from the Distributor. Installation will stop.
  HELP ME GUYS - I NEED THE NORMA GRAPHICS DRIVERS

  Hello

  try this one... maybe this will help

  http://support.toshiba-tro.de/Tedd-files2/0/work/display-20080908151151.zip

  V6.14.10. * 4953 *.

• Re: Satellite U300: can I install Vista Ultimate?

  Hello.

  A few days back, I bought Satellite U300 series but it came with VISTA Home Premium that I don't want.

  Can I install WINDOWS VISTA ULTIMATE on my computer, if yes from where I can download the drivers.
  Is there a specific order I have to follow to install the drivers after installing VISTA ULTIMATE.

  Seniors need help here, please...

  Thank you and best regards
  Khurram Shahzad

  Of course, you can install Vista Ultimate on this laptop.
  All Vista drivers can be downloaded from the page of European driver of Toshiba.

  Ask for the specific installation order?
  Well, I'd start with the common drivers like Chip Set Utility, display driver, etc.
  In addition, I would recommend checking the option details, because there you might find driver and software details.

  By the way; the Intel Robson (SATA driver) package must be included in Vista because this driver is required for the recognition of the HARD drive.