Installation problems for HP PSC 1317 - need help Urgent!

Similar Questions

• Installed PCHealth Software says that my wife was mandatory fixed for windows seven, $285 need help.

  Installed PCHealth Software says that my wife was mandatory fixed for windows seven, $285 need help.

  CrystalBall © SEZ...

  See:

  I received a phone call from someone who claims to have a Virus
     http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001

  [HOW] Avoid scams phone & other support Tech Cyber scams
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  [HOW] Avoid scams that use the Microsoft name fraudulently [phone & email]
  http://www.Microsoft.com/security/online-privacy/msName.aspx

• Autoruns.exe serious problem, need help urgent please

  Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

  Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• No support for pse4, don't need help with aid and all the rest. What is a layer? How can I get help PDF from CD? I don't have any idea how to use it. I have a Macbook pro.

  Need help with using pse4 not taken in charge by adobe. How subjects do not available and I have never used something like that. Aide said there is a download but have not been able to do. What is a rookie to do? Y at - it somewhere that I can go to learn how to use PSE4?

  To find out how your problem:

  http://kb2.Adobe.com/CPS/402/kb402107.html

  To get help from the CD files you double-click in the finder, go to PDF help and drag it to the desktop or elsewhere.

• Need help Urgent, a Site on the 2 areas, edge of animation works only for a single domain (not the domain clients)

  Hello

  need help with something really strange.

  I create a Restaurant website: www.arkadasch.de

  I test on my server the Site: www.bbaur.com/arkadasch

  As you can see I got the top of the page an element Ede animated.

  When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.

  I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?

  I downloaded the same site two areas and it is always the same. My only he is on the right.

  I have delate my cache also.

  Someone has an idea?

  WOW-found the error.

  The name is written 'o'. and the psd file is named «Özden»

  I have change the name of "ozden" to "zden', delate the German symbol 'o'.

  Modify the edge of animation, save again, insert into Adobe Muse and now it works

• ID error blackBerry Smartphones: 40730 need help urgent to reset the password *.

  Hi team,

  I need help to reset the password for the BB APP world, I logged this site:- https://blackberryid.blackberry.com/bbid/main/login.seam?callbackuri=&i=4218081 this link is send me by email a password reset agin to the BB user ID which is (info personal removed) @blackberry.com is my user name. How can I get the password from there when I ask to reset the password.

  Donmenezes wrote:
  Hi guru,.
  Thank you for the answer. I followed the entire process, but none the case on all the links there is an option to send the password to reset BlackBerry ID to an external address is e-mail that is for example:-gmail account. I really need some request you please explain myself better.

  I think that you read correctly... re-read the Workaround"" section. He said nothing to do anything to your GMail account instead, you must follow the instructions, log into your BIS account (from a PC or your BB... it will be much easier to use a PC well) and activate the automatic redirection of your @bb to your Gmail account. Then return the password reset email, access your GMail account, and you should receive the email to reset it in order to finally use it to solve your problems.

  Please follow exactly the instructions and if you don't follow some sections, he cites exactly with what exactly you did and what exactly doesn't work correctly (point by point, please, with all the details). I can't explain that any better unless you are specific about exactly where/how you're stuck.

  Good luck!

• Extended attributes are incompatible - need help urgent please!

  Hello Microsoft Forum,

  I want to keep this short, as I now have serious problems.
  I have Windows 8 Pro, with each update installed.
  I was looking through the net by chance, then the messaging with a friend.
  My friend has design a logo, which he sent via Skype in a .png format.
  When I double click on the logo, the problems started. Everything has become very slow.
  The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
  The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
  Image viewer of course could not open the music file.
  So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
  This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
  In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
  I'm the admin user and UAC is set to the last row (no notification).
  In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
  I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
  I have, however, never changed anything with my theme, the sound was enabled by default.
  Setting the sound theme "None" did nothing, just like the definition of the theme options.
  Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
  Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
  With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
  This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
  The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
  I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
  I wish I had of emergency aid, as this is my main work computer
  . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
  Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
  Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
  I really want to reinstall everything, I hope that a solution to this.
  Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
  Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
  Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
  Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
  Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
  I hope that my question is understandable
  . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
  Kind regards
  Richard

  Hi Richard,

  Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

  I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• NEED HELP URGENT! 5.2 Lightroom runs slow on my new PC

  Hi all!

  Thank you for the time you spend reading this! I am very grateful!

  A few months ago, I decided to connect my laptop to a Full HD monitor so that I can hopefully get a better resolution when editing photos. I bought the monitor but BAM! It was all lagy and I realized that my laptop is not good enough to run things smoothly (although it may do so at its native resolution perfectly 720 p) so, as a student, I started to work and to invest the money to buy a computer case and use it with the monitor that I had already bought for no reason!

  So, I built my new PC recently and I put the (relatively) decent material about it but I still have the same problem

  Here are the specs of my PC:

  Windows 7 SP1 64 bit

  RAM: 8 GB DDR3 1600

  Processor: AMD FX-8320 8-core 3.5 Ghz

  MB: ASUSTeK COMPUTER INC. M5A97 R2.0 (Socket 942)

  Graphics card: 1024MB ATI AMD Radeon HD 7700 Series (GB)

  Hard drive: 500 GB Western Digital SATA 3

  Here's the video of my delay in the computer:

  http://www.YouTube.com/watch?v=xtaKV1wH9pY

  (the video is from 4.4 lightroom but 5.2 is the same)

  I know that some of you will say that's not SSD, so it's slow, but I don't think that my hard drive is causing a problem. Laptop from my friend who has specifications lower than mine (a 2.5 HDD), lower map low graphics + CPU (but Intel i7) performs much better and is much smoother (is almost perfect) in the culture and the change of exposure.

  What do you think is the problem? It's shit AMD processor that is the cause, or is - this lightroom which is not compatible with my processor? What parts should I change as appropriate, or do I return everything and work with lower resolution on my laptop

  I really need help with this, because if I can't solve this problem, I have to return the PC and get refund because there will be no use for me.

  Very well! So, what's up on my new processor and motherboard! I will also avoid AMD for the rest of my life (as long as I use Lightroom!)

• photos were deleted from my phone? !!! need help urgent pls

  So I'll start from the beginning.

  So at the beginning I had 5200 pictures and everything was fine, except that I couldn't take any pictures on Snapchat. So I decided to delete some pictures. Except sometimes just deleted photos would return as 2 seconds. And sometimes I would say 5 photos selected, but I couldn't see anything selected? Or I have to press SELECT again and again.

  at least one forward a few hours and I received on my phone, except that now it says I have only 3600 pictures! I lost a few photos, especially those previously on my phone, then some of the pictures I deleted months ago as last year are back. And I have pictures on my recently removed, but not the ones I lost!

  I feel that my phone is somehow back in time or something.

  And I lost a few photos of a wedding and I regret totally stayed so much (((pls est de toute façon??))

  also, I need help using http://www.ipad-converters.org/recover-photos-from-iphone/ this type also.

  Hello

  When you recharge an iPhone / iPad, it will be saved up to iCloud on wifi you

  Restore the original configuration.

  When configuring back it will ask you if you want to use iCloud backup say yes

  Use the backup of a time where you had all your photos.

  See you soon

  Brian

• !!!! NEED HELP URGENT! Cannot / uninstall ArcGIS Desktop: "error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package.

  I use a 2005 Dell Precision 670 with OS Microsoft XP Professional x 64 Edition Version 2003, Service Pack 2.

  I tried to update my version of ESRI ArcGIS Desktop v9.3 to v9.2, but in the process of uninstalling v9.2 there error/corruption (although at the time, I don't remember getting the error messages).

  Symptoms were: program icon not slot "start > programs" or less "C; "" / Program Files "C:/Program Files (x 86) or ' but the icon still appeared in the list of installed programs in"Add or remove programs ".

  Suggestions to be by ESRI:

  -Re-registration of the service Windows Installer - Ran fine, but the error still there.

  -File system - fine Ran but error checker always run here.

  -Downloaded Windows Installer cleanup - NO error found.

  -Downloaded CCleaner - NO error found.

  -Manually deleted the program, manually remove the following program files: C:\program files\arcgis; C:\Program Files\Fichiers files\esri. C:\Documents and setting\%user name%\application data\ESRI

  -Manually remove ESRI records in the registry: I did it by start > run REGEDIT [press ENTER], then navigate hkey_local_mahine/software and sailed to hkey_current_user/software.

  -Tried to repair the program from the installation disc, but it always seems to grind to a hault about 50-75% through the configuration of the repair procedure.

  -Tried to uninstall the program with the vision more recent ArcGIS Desktop but I still get the ERROR 1721.

  I was once in contact with the package vendor (ESRI) UK support team and they sent this problem at their headquarters in the States.

  I'm really at a lost as to how this can be fixed, because this program is what I use for my career! Help, please!

  This may be a day late and a dollar short, but there is a question we've seen recently with ArcGIS facilities.  There is a registry change to ArcGIS that limits the size of the regestry and NOTHING prevents installation once this limit is reached.

  Do the following reg key change:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\RegistrySizeLimit

  Update the value ffffffff

  Restart the computer.

  Here is some info on this registry key: http://support.microsoft.com/kb/124594

• HP Photosmart all-in-one C309a: need help Urgent! -HP Photosmart all-in-one problem C309a Incompatible cartridge - 564 and 862

  Hello everyone.

  I am a happy user of HP Photosmart all-in-one printer and for many years never had a problem.  I always bought new 862 cartridges and it worked fine.  Recently, a friend brought me to Singapore two new series of cartridges, but the owner of the store said this is the new higher capacity cartridges.  I said why not?  Even better, in fact since the printer is a guzzler of ink!

  This is, because I tried to install these new cartridges, I always get the message "Incompatible cartridge" after what, I can't not access the printer.

  Can someone help me solve this problem?  The cartridges are exactly the same, so I suspect its something to do with the chip?  I tried all possible methods such as the re-installation of the cartridges, remove the carriage and re-setup, cleaning the cartridge chip, etc.

  Since I'm brought this printer back from China to Europe, I really need to solve this problem otherwise I'm stuck without a printer.  These cartridges are not available locally.

  I would be grateful any advice!  Thank you.

  Your printer can use cartridges of 864. Unless you call HP and have them reset the printer to your new country, you live. Only then these cartridges can be used if you can find them on the spot. Call HP.

• BlackBerry, need help Urgent network connection problem

  Hi all

  I put an application Blackberry OS 6 and 7 of the OS, this application uses the salesforce connection and its other api calls.

  My application works well here in India, but when I deliver it to the customer I had connection timeout error (in the United States). I tried all the string connection possible but still unable to solve the problem at my end.

  Can someone help me with this problem?

  Its very urgent. I need to connect via WAP2 and the code for my connection parameter string is:

  "

  Dim connectionString As String ="";

  String carrierUid = getCarrierBIBSUid();
  String wap2 = getWAP2ServiceRecord();
  If (carrierUid! = null) {}
  Otherwise, use the Uid to build a valid transport BIBS
  request
  Logger.logEventInfo ("uid is:" + carrierUid);
  connectionString = '; deviceside = false; connectionUID ="
  + carrierUid + ";". " » ;
  } ElseIf (wap2! = null) {}
  connectionString = '; deviceside = true; connectionUID =' + wap2;
  } else {}
  A carrier coverage, but not the BIBS. So use TCP of the carrier
  network
  Logger.logEventInfo ("no Uid");
  connectionString = '; deviceside = true;
  }

  return connectionString;

  "

  the definations of function are:

  "

  private static String getCarrierBIBSUid() {}
  Reviews [ServiceRecord] is ServiceBook.getSB () .getRecords ();.

  for (int i = 0; i)< records.length;="" i++)="">
  If (records [i] .getCid () .toLowerCase () .equals ("ippp")) {}
  If (records [i] .getName () .toLowerCase () .indexOf ("bibs") > = 0) {}
  Records return [i] .getUid ();
  }
  }
  }

  Returns a null value.
  }

  private static String getWAP2ServiceRecord() {}
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.findRecordsByCid ("WPTCP");
  String uid = null;
  for (int i = 0; i)< records.length;="" i++)="">
  Search through all records of service to find the
  valid non-Wi-Fi and non - MMS
  Booklet of WAP 2.0 Gateway Service.
  If (records [i] .isValid () &! records [i] .isDisabled ()) {}
  If (records [i] .getUid ()! = null)
  & records [i] .getUid () .length ()! = 0) {}
  If ((records [i] .getCid () .toLowerCase () .indexOf ("wptcp")! = - 1))
  & (records [i] .getUid () .toLowerCase)
  .indexOf("wifi") is - 1).
  & (records [i] .getUid () .toLowerCase)
  .indexOf ("mms") ==-1)) {}
  UID = records [i] .getUid ();
  break;
  }
  }
  }
  }
  If (uid! = null) {}
  Open a connection WAP 2
  Returns the uid;
  } else {}
  Consider another action transport or alternative.
  Returns a null value.
  }

  }

  "

  I get "unable to select the descriptor of adequate transport for the url:

  "https://login.salesforce.com/services/oauth2/token ...". "

  any help is appreciated

  Thank you

  Manish Kumar

  Hi all

  I solved the problem.

  My connection setting requires '; EndToEndDesired' for HTTPS request (although it works for me without this parameter). I tested the app using deviceanywhere and after the addition of this application of the setting run perfectly.

  connectionString = '; deviceside = true; connectionUID =' + wap2
  + "; EndToEndDesired ';

  Thank you for your comment stone

  I was actually using reproductive WAP2.

  Version of the client OS is BB OS 7 (on the Torch 2 9810)

  Concerning

  Manish Kumar

• Troubleshooting installation problems for non - Adobe applications CC versions

  Hello

  For non - CC users who are still working with installers directly, I see that we continue to show the hyperlink for "Get Adobe Support Advisor" (Adobe - Adobe Support Advisor) to install her (RIBS) dialogues error.

  The web page then has a link to the Adobe support section (of Assistance from Adobe). A bit like a redirection.

  However, since the tool consultant support is no longer available, ca we specify not just that in the first place?

  This is such a complain to the user of the Lightroom Product:

  "After going on the link in the above screen, capture and I downloaded Adobe Application Manager, open the .dmg file and run the installer.  The result is the following error message telling me that the application won't install and directing me to "get Adobe Support Advisor.

  

  After going on the indicated link in the screenshot above to get Adobe Support Advisor, I find myself on Adobe Support Advisor page, which, rather than providing a just download link informs me that "Adobe Support Advisor has been discontinued"

  

  Then what should I do?

  Maybe someone at Adobe would be nice enough to tell me why I get instructions to download and install an app that does not install and then to direct me to a resource that no longer exists?  "

  > Open the .dmg file and run the Setup program

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Trying to get Essbase Client 11.1.2.3 for Linux 32 bit, need help please

  Hello

  I'm running a 64-bit RedHat Enterprise Linux 6.4 system and have an application that requires that the Client of Essbase 32-bit libraries to connect to a server instance Essbase 11.1.2 11.1.2.X.

  Go by reading the messages of the forum for the past couple days, I came to understand that Oracle Essbase 11.1.2 no longer ships a client Linux as a separate assembly, you must therefore install the complete Essbase server and then extract the files of the client out of that use.  So I'll try to get the correct bundle of downloaded files to the same get the installer to launch correctly so I can choose a minimum installation, including the components of the client, but I can't get correct zip files, I almost, but there is always some missing, and the instructions I found seem to refer to 11.1.1.X versions which have changed a bit in the 11.1.2.X version.

  Can someone please help me understand what still me get installation running and how to extract the client libraries?

  So far I have downloaded:

  2073792430 22 April 11:43 Apps-11123 - linux32.zip

  2440713397 22 Apr 11:46 ClientInstallers - 11123.zip

  554953827 apr 22 11:47 Essbase-11123 - linux32.zip

  171726540 20 June 09:08 FinancialManagementAnalytics-11123 - linux32.zip

  1053291166 22 Apr 11:52 Foundation-11123-linux32 - Part1.zip

  1603812256 22 Apr 11:53 Foundation-11123-linux32 - Part2.zip

  939688909 22 Apr 11:53 Foundation-11123-linux32 - Part4.zip

  1597577101 22 Apr 11:55 Foundation-11123 - Part3.zip

  1801831469 22 Apr 12:01 OSH-11123 - linux32.zip

  366584941 22 Apr 12:04 RA-11123 - linux32.zip

  BUT I still have the following missing assemblies, that I can't take into account:

  EPMINS-01001: one or more checks of preinstallation failed. Correct the errors before continuing with the installation.

  See assemblies: / home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hfm_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient64... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_server... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient32... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/FDM... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/bpm_architect_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_webapp... Not exist

  I'll go through the list of entries, but the only references I've seen so far have been for Windows downloads and it's linux and then Assembly linux32 messages there, but I need since I need right 32-bit client libraries?

  Can someone shed light on this adventure in the installation of this since all of the installation instructions I could see are for an older version conditioned differently?

  Thank you in advance,

  Nathan

  The best place to download files of EPM is compared to the clouds of software Oracle delivery - https://edelivery.oracle.com

  The files that you need will be sub - "Oracle Enterprise Performance Management System (11.1.2.3.0) Media Pack for Linux x 86.

  The files required for Essbase are:

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 1 version

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 2 version

  EPM System Release 11.1.2.3.0 part 3

  The system of EMP 11.1.2.3.0 for Linux x 86 part 6 version

  See you soon

  John

  http://John-Goodwin.blogspot.com/