Installation scanner Opticon 2001 on windows 7

Similar Questions

• There is an error produced so that the definition of scanner when scanning through Windows photo gallery properties

  Original title: scanner MEM48U does not not under vista

  Hi, I use MEM48U scanner under xp. The scanner even when it is installed with vista installed and updated the driver. But when tried to browse the Windows Photo Gallery, it is said that a "error occurred when setting the scanner properties. If another program uses Pl waiting and let it fill. »

  Hello components,

  I couldn't even Memorex MEM48U on the site Web of Memorex. It must be abandoned. On other 3rd party sites, I found Windows XP and earlier operating systems drivers.
  If you try to use on a Windows Vista system, it may not work because of the lack of a Windows Vista driver.

  The Windows Vista Compatibility Center does not list this product compatible with Windows Vista. You can try to install in compatibility mode with Windows XP drivers and see if that helps.

  Run the installer in compatibility mode:

  1 right click on the file icon installation.
  2. click on properties > compatibility.
  3. Select the compatibility mode for Windows XP.
  4. click on OK.
  5. run the installation program.

  After installation, run the program in Windows XP compatibility mode by doing the same thing with the installed program.

  I hope this helps.

  Marilyn

• Scanner Utility For Microsoft Windows will not uninstall

  I am trying to install drivers for a new Fujitsu scanner.  The installation process gives me a message that I need to first uninstall the Scanner Utility for Microsoft Windows.  I go to the control panel and go through the uninstall process, get an acknowledgement that it is uninstalled, but it's still there.

  How can I get rid of him?

  some things on the Internet immediately to protect me against the consequences of the break-in. I didn't know that the version of Windows is 64-bit, until I started to have problems with the scanner software.

  It's very strange to not be able to uninstall the software does not work.

  Colin

  The problem by uninstalling is in this case the software never have installed correctly in an incompatible operating system. At least some of the files and settings are not where they are supposed to be for uninstall work.

  System restore would be the first resort in this situation. Odd that you had only 3 points of restoration. I assume that you checked the box to show other Points of restoration as well. With my current settings of SR there is about 16 points of restoration.

  The last resort to undo the mess would be to backup your user files on DVD or an external drive and make recovery from a manufacturer of the system on your computer. That he would make an out-of-the-box state. Most computers have recovery disks, unless you use OEM provided utility to burn yourself. If your computer is all major OEM there will be a recovery on her partition. OEMs a method to retrieve their OS and system software without erasing your user files. You would still re - install all the programs that you added, but it may be a lot less painful to have to put everything back. This path you would still Fujitsu folders with files in them, but they'd be sure to delete at this time, because the system registry would be clean. Accessing recovery of the system in the start menu usually takes you straight into the destructive recovery mode (ie. reformatting the drive and just reinstall). It's a little more cautious to start the Windows recovery. There should be a recovery utility somewhere in a folder in your menu all programs that will give access to the less drastic ways of recovery (reinstall system only or reinstall drivers and programs).

• Not able to use my Canon Scanner model CanoScanFB650Ui with Windows 7.

  I'm not able to install my scanner CanoScanFB650Ui I use Windows 7, probably compatibility issues. How can I solve the same?

  Have you tried to install in compatibility mode?

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• scanner not recognized on Windows 10

  I just bought a new computer Windows 10 and added my Canon MP216n printing and updated software of the Web site

  Initially, everything worked and now the Canon Toolbox can not find scanner.  My computer windows 8 on the same WiFi considers it, and it works fine.  I don't know why it stopped working.  I removed the printer and reinstalled but the same result.

  Any suggestions?

  Hi ronwebber,

  Please check the model number of the Canon printer you have.

  Model number would be MF216n instead of MP216n imageCLASS?

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Can I transfer my old regsitry to a new installation of clean boot of windows 7

  Can I transfer my old register to a new installation of clean boot of windows 7?  If so, how this is done?  Without a transfer, it is necessary to reinstall all my software and it is very time consuming.

  You will not be able to transfer all the registry settings. Unfortunately, you will need to reinstall everything.

• MFC - 290C scanner does not. Windows error solution

  MFC - 290C scanner does not. Windows error solution

  Hello

  ·        You did changes to the computer before the show?

  ·        If it works much earlier?

  ·        What is the exact error message you get?

  I suggest that you follow the steps in the link and check if it helps you to solve the problem:

  http://www.brother.com/E-FTP/windowsvista/us.html

• scanner Fujitsu fi - 4120c Windows 7

  Is there a download driver for scanner Fujitsu fi - 4120c Windows 7

  Apparently not. You can try the Vista drivers, but if they do not work, you will need to buy a scanner supported in Windows 7 (32 or 64-bit - check first).

  http://www.Fujitsu.com/global/support/computing/peripheral/scanners/drivers/

  Other questions about Windows 7 problems should be posted in one of the Windows 7 forums here instead in the Vista forums.

  MS - MVP - Elephant Boy computers - don't panic!

• CardScan Executive 700 c Scanner USB compatible with windows 7 64 bit?

  CardScan Executive 700 c USB Scanner drivers available for Windows 7 64-bit?

  CardScan has a 64-bit driver. It worked with CardScan 7.0.5 and Windows 7 x 64.
  http://www.CardScan.com/support/supportdocs/tech_doc.asp?doc=scanners/91004.asp

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• installation scanner epson 2450 on win 7 (64-bit)

  I just upgraded from XP to Win 7

  I can't scanner to work on Windows 7 (64-bit)

  It works with Vuescan (64), but this program is not flexible enough for me.

  I've been using ABBYY on XP without any problem, but I can't get the program to recognize

  the scanner in Win 7

  Any suggestion would be appreciated

  Denzil Botting

  Denzil Hello,

  According to the Epson site, the problem is that your scanner does not work in a 64 bit environment: it only supports Windows 7, 32 bit OS. That is why he used to be recognized under XP, but is not on your 64-bit system Win 7.

  Your only photo would be to find a program of scanning (with driver) can fill the Bit depth (work in 32 and 64 Bit OSs).

  Sorry, this is not the information you wanted to hear.

  Kind regards

  BearPup

• Installation of AutoCAD 2009 on Windows 7.

  Hello

  I need to install AutoCad 2009 on Windows 7 Home Premium, which I am unable to do. Can I get a solution as soon as POSSIBLE for the same?

  I also read in the forums that if I switch to Windows 7 Professional, I would be able to run the installation of AutoCAD in XP compatible mode. Kindly update me on the same.

  I use Asus K61IC notebook PC series and would also support the upgrade.

  Kind regards

  Jaisalil Shilewant

  Vruttaunsh Infra Pvt. Ltd.

  _____________

  This is a public forum. Please do not post personal information, including phone numbers. Thank you!

  Hello
   
  
  a. you get an error message during the installation of this software on Windows 7?
  
  1. both 32-bit and 64-bit versions of AutoCAD® and AutoCAD LT® 2010 2010 are compatible with and supported on Microsoft Windows® 7 However Autocad 2009 is not tested on Windows 7 platform according to the information available on the Autodesk site:
  Microsoft Windows 7 and Windows Vista compatibility
  http://USA.Autodesk.com/ADSK/servlet/index?ID=10676692&siteid=123112
   
  2 its been noted that if the computer supports hardware virtualization sometimes xp mode works on home premium as well so its worth a try before the upgrade to Windows 7 Professional.
  Here are a few links that explains about Windows XP mode in Windows 7. We recommend that you download and install Windows XP mode on your Windows 7 computer.
   
  Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
   
  Install and use Windows XP Mode in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
   
  Using Windows XP Mode
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode
   
  ASUS & Support Services
  http://USA.Autodesk.com/ADSK/servlet/item?ID=14949567&siteid=123112
  3 regarding the upgrade is concern, please refer to the article below:
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  Probably, you mean a Laserjet P3015 series multi function device?

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=3815798&prodTypeId=18972&prodSeriesId=3815797&swLang=8&TaskID=135&swEnvOID=4062