Installing XP - 64-bit in the HP Pavilion Elite d5200t ATX CTO desktop PC

Similar Questions

• BM.exe on a HP Pavilion Elite d5200t ATX?

  A few months ago, I have a HP Pavilion Elite d5200t ATX with pre-installed Vista 64-bit.

  More recently, I noticed the BM.exe program included in its start menu would rarely go more than a minute after a reboot without close with an error message (non-registered details)

  Even more recently, I found a reason to run the Norton Internet Security program that came pre-installed on this machine in the next higher than default scan mode.  He then paid account the BM.exe file looked like it might be malicious and had no certificate indicating what company it origin and therefore should not be allowed in the start menu.

  This file is even supposed to be included in the Vista 64 pre-installed for this machine?  If so, is there a newer version which runs correctly, comes with an appropriate certificate and entered in database of Norton of the software which is not a virus or other malicious software?

  Also, what directory does in?  It seems to have disappeared from my computer when I leave the disable Norton program in the start menu. recent research of the entire disk C: failed find.

  Delete it.    http://www.bleepingcomputer.com/startups/BM.exe-21373.html

• Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

  I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

  When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

  EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

  Thank you

  Curtis

  Solved!

  Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

  Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

• How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

  I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

  Any suggestion?

  Thank you

  Wayne

  NVM. I can boot from a USB on the computer.

• HP PAVILION ELITE D5200T - Windows 7?

  I have a HP PAVILION ELITE D5200T, which currently runs on Vista 64 - bit OS. Can it be upgraded to Windows 7? Are there compatibility issues I should know about?

  You should have no trouble at all, upgrade to or install Windows 7 on your desktop HP Pavilion Elite d5200t ATX CTO. Infact, HP has the drivers for Windows 7 on their "Software and downloads" page for your computer.

• the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  topic says it all...

  the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  Hello

  ' HP ' how-to ' article should be useful.

  My e9280t has the same firm and the drive cage holds two drives.

• HP Pavilion Elite HPE - 575 a desktop PC set up latest patch Windows 7 from Tuesday

  Hello

  My HP Pavilion Elite HPE - 575 a Desktop PC running Windows 7, 64 bit will not configure the last patch Tuesday, August 14, 2012 Windows. The computer seems if running all the updates correctly when stopping however the next time that you start it only configures approximately 30% before failing and then close to return to the previous state.

  Something has changed in the microsoft update that resolved itself after several days without doing me anything.

• New disk SATA hard for HP Pavilion Elite m9065.uk, a desktop PC

  I am wanting to buy a new hard drive for my HP Pavilion Elite m9065.uk, a desktop PC. Here are its specs:

  http://support.HP.com/us-en/document/c01242071

  Now, the material is not my specialty. I know that I need a SATA drive, but I don't know that one to buy? I will be limited to the capacity of HDD can I install it? I would ideally like to 1 TB.

  I guess I can't install a player?

  Thanks a lot for any advice.

  Hello

  Your computer is fairly new, you should be ok, installation of a 1 TB drive.  Older computers may have problems of card motherboard/bios with bigger hard drives.  You can also install a SATA2 drive, but if your motherboard doesn't support SATA drive will just default to this speed (SATA2 is backward compatible).  The player below is to consider.

  http://www.Amazon.co.UK/Seagate-Barracuda-7200-12-drive-cache/DP/B0024FAN24/ref=sr_1_5?ie=UTF8&QID=1287523497&SR=8-5

  Hope this helps,

  DP - K

• HP Pavilion Slimline s5-1200z: HP Pavilion Slimline s5-1200z CTO Desktop PC Blu Ray drive replacement

  I need a rewritable BD/DVD/CD player replacement for my HP Pavilion Slimline s5-1200z CTO desktop PC. Is there a part # where can I order a replacement?

  CTO build page is referring to a x 6 or drive Blu - Ray 8 x, theHPPartSurfer page refers to these:

  504941-200 8 x optical drive to read Blu-ray (BD) DVD + RW SATA SuperMulti HD - LightScribe

  DVD 504941-801 - 6 x / 8 X BD-Writer XL nLS BE JB ECO

  As noted, the BD-Writer is 504941-801.  Just Web search for this number.

• Pavilion Elite d5000t ATX Desktop cpu fan is bad sound

  started making a bad sound yesterday today it was worse, I don't want to burn the CPU can someone help me find a pretty good fan to replace it by I have that $25 I am disable on SSI so I'm on a fixed income HELP Please HP Pavilion Elite d5000t ATX Desktop

  Some added info to consider...

  The fan is a separate item. It is mounted on the radiator with screws.  This fan is a 4-wire PWM unit. You need:

  (1) the low fan speed. Use of this program.  The CPU fan is FANIN0

  (2) measure the fan using this guide. Fans are 80 mm, 92mm for typical CPU/heatsink.

  (3) WARNING: If you buy a fan at low speed, the system does not start.

• HP Pavilion 17-ab008no: the amount of RAM I can install on my own on the HP Pavilion 17-ab008no

  Hello!

  The HP Pavilion 17-ab008no comes with 12 GB of RAM.

  I would like to know how many RAM slots it altogether, if all is used from the beginning and so if I can install more memory RAM on my own later and how much in this case.

  Good bye.

  Hello

  Max is 16 GB:

  Two SODIMM slots, are not accessible or scalable client:

  Dual channel support ● DDR4-2133

  ● DDR4-2400 dual channel supports (bridge of DDR4-2133)

  Supports up to 16 GB max memory system with the following:

  ● 4096 MB (4096 MB x 1)

  ● 6144 MB (2048 MB x 1 + 4096 MB x 1), no support for 32-bit operating system

  ● 8192 MB (4096 MB x 2) or 8192 MB (8192 MB x 1), no support for 32-bit operating system

  ● 12288 MB (8192 MB + 4096 MB), no support for 32-bit operating system

  ● 16384 MB (8192 MB x 2), no support for 32-bit OS or Windows® 7 Home Basic Edition

  Your machine already has 16 GB:

  http://support.HP.com/BG-en/document/c05200869

  Kind regards.

• How can I determine the HP Pavilion Elite m9400f video card installed?

  Hi all

  I work on a Pavilion Elite m9400f for a friend and would like to know how to determine the video card installed in order to get the correct drivers and configure properly. He "cannot" be the card that came with the machine...

  Thanks in advance!

  Regards - FreddoB

  Fred, here are the pages of the 'product details' for the computer.  In the Product Specifications section, that's what he said:

  Video Graphics

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Try to install Itunes 64-bit, get the error message that says a DLL file is missing. How can I fix?

  I have windows 7, 64 bit.  I am trying to install ITunes 64-bit Installer but get an error message indicating that a DLL file is missing.  How can I fix?

  Hello

  Welcome to the Microsoft community, the best place for all windows related queries.

  I see that you can not install iTunes 64-bit install as it says .dll file is missing.

  I suggest to download the installer once more and then try to install it once more.

  If you still experience the problem, then I recommend you view the query on the Apple support forums. Here is the link for your reference.

  https://discussions.Apple.com/index.jspa

  For other Windows-related issues feel free to get back to us. We're always here to help.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.