BM.exe on a HP Pavilion Elite d5200t ATX?

Similar Questions

• Installing XP - 64-bit in the HP Pavilion Elite d5200t ATX CTO desktop PC

  Hello!

  I recently got a HP Pavilion d5200t desktop pc. He came with pre-installed Vista 64 bit. Now, I want to install XP 64 bit or XP-32 bit and Vista 64-bit.

  I tried to install both XP 64 and XP-32, and he gave me a blue screen with error messages. In addition, I want to use the XP boot cd to partition my hard drive. Partition Magic gave me comaptibility warnings, so I did not. Any suggestions how get this resolved would be greatly appreciated.

  Thanks in advance

  Make sure first of all of the recovery disks.

  Search in the bio and see whay options you have for the AHCI mode. You can change it to IDE?

• HP PAVILION ELITE D5200T - Windows 7?

  I have a HP PAVILION ELITE D5200T, which currently runs on Vista 64 - bit OS. Can it be upgraded to Windows 7? Are there compatibility issues I should know about?

  You should have no trouble at all, upgrade to or install Windows 7 on your desktop HP Pavilion Elite d5200t ATX CTO. Infact, HP has the drivers for Windows 7 on their "Software and downloads" page for your computer.

• Pavilion Elite d5000t ATX Desktop cpu fan is bad sound

  started making a bad sound yesterday today it was worse, I don't want to burn the CPU can someone help me find a pretty good fan to replace it by I have that $25 I am disable on SSI so I'm on a fixed income HELP Please HP Pavilion Elite d5000t ATX Desktop

  Some added info to consider...

  The fan is a separate item. It is mounted on the radiator with screws.  This fan is a 4-wire PWM unit. You need:

  (1) the low fan speed. Use of this program.  The CPU fan is FANIN0

  (2) measure the fan using this guide. Fans are 80 mm, 92mm for typical CPU/heatsink.

  (3) WARNING: If you buy a fan at low speed, the system does not start.

• To be lock HP Pavilion Elite d5200t BlueScreen out-of-box video

  In collaboration with assistance, but so far not much of help.  Had to make three restore system to factory settings already.  What happens is that if you leave the session from the computer for a while, there finally goes to blue screen and tells you a driver error video (I have the video card ATI Radeon 4650).  After the restart, details of the Diagnostics confirm it with an error 'video phone' and the appropriate solution is to install the latest driver or check the performance parameters.  It's only an old computer for 1.5 months and when I got the download of the driver from the HP website and installed, I think it's the same version I already had.

  He has problems with this video card?  I'm starting to think I have a faulty card or a faulty motherboard.

  Thank you

  Larry

  I am tired to jump through all the hoops and diagnostics that help support kept asking me to do (by electronic mail in both directions), I went to the website of ATI (AMD) and downloaded/installed the latest version of the driver.  So far, so good, so I hope that this solves the problem.

  Larry

• HP Pavilion Elite m9470 Desktop PC VISTA' "XP need drivers for XP!

  Hello, before sorry all abaut my inglish.
  
  I bought this "HP Pavilion Elite m9470 desktop PC", but it comes with VISTA and VISTA and just don't get along... so I format and install XP, the problem is I can not find drivers anywere for chipset, audio network... etc.
  
  Can someone help me?     And tanks anyway...
  
  Best regards
  
  Edgar Afonso
  
  

  I meant the full model number...

  m9470a
  m9470es
  m9470gr
  m9470it
  m9470nl
  m9470pt
  m9470sc

  I guess that's m9470pt, since I took the time to look through the plug of each and it is the only one with Nvidia 6150se Chipset?

  NVIDIA Chipset:

  http://www.nvidia.com/object/nforce_winxp_15.24.html

  Realtek HD Audio:

  FTP://66.104.77.130/PC/audio/WDM_R212.exe

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• HP Pavilion Elite e9220y PC, black screen with blinking underscore.

  Hello. I have a HP Pavilion Elite e9220y with Windows 7. I have a black screen with a flashing underscore.

  I stood and went to the bathroom and came back to this (on fiance mobile atm). If I go, I can do ctrl + alt + delete and get everything except the system recovery... so I made a recovery CD.

  In the recovery CD, I get the options to
  Startup Repair
  System restore
  System Image recovery

  Windows Memory Diagnostic
  Command prompt.

  I have everything but my mouse, screen and keyboard connected. No CD in except for the recovery CD.

  Startup Repair found nothing, so I tried to restore the system... He said it restored to an earlier date, but I get the same screen and the same options... So I tried the following steps:

  Boot from the new rescue CD, select repair your computer and choose the command line. When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Above always leads to have the black screen with the underscore flashing with the same options available... I'm so lost...

  If possible, I'd like to back up my files I have. I have plans on my computer that I spent working long hours and lots of family photos. BUT if this is not possible (I have not access to a second round to save the files), then I'm more than willing to start again... I want to just that my computer back... I have not even had it for three years yet.

  So any help to get back on the rails would be greatly appreciated... Thank you in advance.

  
  

• HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

  Hello

  I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

  Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

  Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

  Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Supports up to 8 GB on 64 bit computers

  Supports up to 4 GB on 32-bit computers

  4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

  BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

  Exit the: 2009-08-03

  Version: 5.05

  Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

  Fix/development:
  Resolves a problem with USB not detected mass storage devices.

  Updates the boot order to place the optical drive before the hard drive.

  Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

  Updates vBIOS to address issues HDMI.

  Updates the strategy thermal processor.

  Fixes an issue with the BIOS fault recovery if the card reader is connected.

• Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

  I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

  When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

  EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

  Thank you

  Curtis

  Solved!

  Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

  Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

• Pavilion Elite 9120Y running Windows7 (64-bit) has frozen. BIOS does not detect not SATA.

  HP Pavilion Elite 9120Y (about 1 year and more) running Windows 7 (64 bit) froze in the middle of a task.  The fan used to rev up every once in a while for 1 year or more.

  I opened the box and looked for the capacitors blown on the video card, but the video card is OK.

  A few times I was able to go in Windows 7 safe mode, but the computer froze in safe mode.  After a while computer ceased to recognize the HARD drive.

  Diagnosis (memcheck) startup DVD worked for a day or two before that stopped working.  Now, I have a Fedora LiveSpin USB and it starts after I disconnect the DVD, CD and HARD drive (SATA all).  Even when the HARD drive is connected, and the Fedora boots, he becomes failure SATA COMMRESET.

  I have to power off / power on many times before the start screen appears (otherwise, it's only in black).

  I have reset the CMOS (change jumper setting and changed back to the original setting).

  In short, it looks like SATA features doesn't work anymore, or bad BIOS.

  How can I request the upgrade of BIOS (for the HP 9120y website) if it does not start Windows 7?

  Any other solution of workarounds, tips, troubleshooting pointers appreciated.

  Thank you.

  The phase I) prepare
  Make a note of the version of the BIOS installed on your computer.

  Phase II) prepare a bootable USB key.
  Visit http://www.biosflash.com/e/bios-boot-usb-stick.htm to find out how to prepare a key USB bootable BACK.

  Phase III) extract the ROM BIOS update the BIOS executable file.

  (1) download the HP provided executable update BIOS.
  (2) download 7zip from sourceforge.net.
  (3) install 7zip
  (4) run 7 - zip file manager, navigate to the provided HP the BIOS exe and extract in the content (by pressing the blue less icon).
  (5) locate the VL (number) (number). (number) (number) file to the USB stick and copy.
  (6) on the USB stick copy port or the VLnn.nn file and rename it HPBIOS.ROM.

  The phase IV) BIOS upgrade
  (1) switch off the PC, in need of updating
  (2) fix the USB
  (3) to start the PC, and you should see the c: BACK prompt.  No harm done so far.
  (4) issue the dir command to see the HPBIOS. ROM on the USB stick c: / > directory.
  (5) reboot the PC, but this simultaneously press the CTRL and the key HOME together when the PC starts.  Hold it for a minute.
  (6) you can release the keys after a certain time (when we know the PC fan is buzzing and do something)
  (7) you don't hear about 5 long beeps (which indicates the BIOS upgrade is complete).
  (8) restart the PC.

  Audit of phase V)
  Check to verify that the BIOS version number reflects the newly installed version.

  References:
  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-recovery-process-for-HP-systems-with-AMI-BIOS/m-p/360147/highlight/true#M9181

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.