Instance of Windows 10 accidents 24 hours after the restoration of a snapshot

Similar Questions

• Get the blue screen for about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"

  I started having the blue screen about an hour after the computer on in the morning, citing "kernel_stack_inpage_error"  The error after reboot report cites an error of the pilot, but not accurate, and I don't know how to find out which driver would be.

  Hello

  ·          Since when are you facing this problem?

  ·          Remember to make changes to the system?

  ·          What is the exact error code that you meet in the blue screen?

  ·          When you encounter this error on blue screen? This happens at random, or whenever you access any program?

  I suggest you to follow the steps mentioned in the article below and let us know your progress.

  You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  Hi jcyho,

  Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought, but it didn't wor

  How can I restore Adobe Acrobat Professional XI (bought earlier this year, in February; education version) after the restoration of Windows 7 to factory settings? I tried the download link provided by email I received when I just bought but it did not work.

  Hello

  Use the following link to download:-

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Database is underway after the restore and recovery

  Database is in the waiting state after the restore and recovery.
  The database cannot start today and it displays an error message: 2 log file can be archived. Then I run the following command:

  SQL> select group#, sequence#, bytes, members, status from v$log;
  
      GROUP#  SEQUENCE#      BYTES    MEMBERS STATUS
  ---------- ---------- ---------- ---------- ----------------
           1        452   52428800          1 CURRENT
           3        451   52428800          1 INACTIVE
           2        450   52428800          1 INACTIVE
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
  
  Database altered.
  
  SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
  
  Database altered.
  SQL> alter database open;
  
  Database altered.
  
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  566231040 bytes
  Fixed Size                  1220580 bytes
  Variable Size             125829148 bytes
  Database Buffers          432013312 bytes
  Redo Buffers                7168000 bytes
  Database mounted.
  Database opened.

  But when I try to log on by using the EM console, it shows that the database is not open. Then I restore and recover the database by using the EM Console. But the database and then enter in pending status.
  What to do next?

  Stop the console 'EM, and then restart it. I hope all is well.

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Cannot reinstall PSE 7 after the restoration of PC (Win XP). Impossible to uninstall, STUCK. Help, please.

  Error message when you try to start the 7 Elements after the restoration of PC (Win XP) "couldn't start b/c the application configuration is incorrect". When you try to uninstall 7, it doesn't appear in the Conrol Panel. But there is a Photoshop 7 folder in Program files. If someone could HELP Please, it would be greatly appreciated. I use this program so much!

  Thank you in advance...

  Here's the Adobe documentation to manually uninstall PSE7:

  http://kb2.Adobe.com/CPS/405/kb405847.html

  Ken

• Why Firefox tells me "another program is using the file" 1 hour after the update of Firefox, when I click on the desktop icon?

  It happened when I tried to update c. 16 to 17 as well. I had go it and download v. 18 and he told me that she had and he asked me to restart Firefox. I clicked on the "Restart Firefox" button. He closed Firefox 17. I waited an hour and no Firefox had begun. I clicked on the icon on my desktop for Firefox, and I got a window with "another program is using the file.

  The last time that happened, I had to uninstall v. 16, use Opera 12.12 to download version 17 and then installed, to have to set my preferences just a little and then I could start v. 17.

  Why update your program allows me to update, instead of downloading a new program?

  I'm on Windows XP SP3 and a very fast motherboard.

  Finally, I decided to check if my AVG antivirus or IOBit Malware Fighter software is interfering and I disabled them temporarily. I restarted and then turned off these programs and then opens Firefox. It was as usual, 17.0.1 version not updated. I went to help, on Firefox, click Find updates. Downloading updates, invited to restart Firefox, and after closing Firefox, I got the window that says that he was installing the updates, for the first time for an attempt to update to version 17 or 18. He installed the updates and restarted in fact without any problems.

  I was about to turn off all of my Add-ons for the next test. I never had to disable my AVG or IOBit before and they are the latest versions, too. AVG is the same version that allowed the update to v. 16 before. If something is different both Firefox 17 and 18, that it will not allow updates with AVG in force (or possibly IOBit Malware Fighter).

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

• Update of Windows broken on HP a400n after system restore

  I have a HP a400n I restored from the recovery partition.  It restores to SP1, so the first time, I added SP2, SP3 and then tried Windows Update.  It is unable to connect to update files WU.

  Then, I started looking for answers and found a dozen of different solutions.  I tried several (things like a batch file being run before turning off the service of cryptography, etc. etc, re-restore then install SP2 then WU running before the SP3 upgrade to IE 8 update and try again) - nothing worked. I was reminded of SP3 issues with HP - AMD systems, but this one is Celeron based.

  I do not fear the research and to try other solutions, but, since nothing I've tried has worked so far, I thought I'd see if anyone recognized as a known issue and could me given more than a shotgun solution try instead of my shotgun approach.

  My apologies for having not followed here.  I tried several solutions more, all with zero success and decided to spread a little.  Yesterday, I started, restore the system from scratch again, then take the State of recovery from SP1 to SP2, Windows Update, and then go to SP3 and try again.  Same result as before - error messages for two attempts (after the upgrade to SP2 & SP3).  However, this time, my search for a solution based on error codes led me to a solution, that I had not tried it before and it worked!

  For the benefit of third parties who may derive from my frustration, I will list the relevant info here for a search in the coming months he will be...

  The SP2 error code was 0 x 80190194 and SP3 error code was 0x802D001.  What worked for me was to follow the advice to the http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/cannot-use-windows-update-error-number-0x8024d001/0ee8dde8-d842-4988-be81-297abc908488?page=1

  I downloaded the referenced zip file, run the batch file and looked like WGET recovered a bunch of files and all over.  Which took about 4-5 minutes.  Then I rebooted (just in case), retried Windows Update and everything worked well.

  Hope this helps someone...